MOOER UK Gold 900 Micro Preamp (M002) Manual de Instruções

Principais características

• Pré-amplificador de dois canais de alta qualidadeamp.
• Independent 3-band EQ (Treble, Mid, Bass) for each channel.
• Independent Gain and Volume controls for each channel.
• Switchable speaker cabinet simulation.
• Two footswitch operating modes: On/Off or Channel A/B switching.
• Compact and durable metal housing.

Controles e Conexões

Imagem: Frente view of the MOOER UK Gold 900 Micro Preamp, showing the control knobs and footswitch.

• Botão TRE (Agudos): Ajusta a resposta de alta frequência.
• MID (Middle) Knob: Ajusta a resposta de frequência da faixa média.
• Botão BASS: Ajusta a resposta de baixa frequência.
• Botão de GANHO: Controla a quantidade de overdrive/distorção.
• Botão VOL (Volume): Ajusta o nível de saída geral.
• Botão CH/CAB:
  • Press to switch between Channel A and Channel B.
  • Press and hold to toggle the speaker cabinet simulation on or off.
• Pedal: Ativa ou ignora o pré-ajusteamp, or switches between channels depending on the selected mode.
• Jack de entrada: Conecte sua guitarra ou outro instrumento.
• Saída Jack: Conecte-se a um ampamplificador, mixer ou interface de áudio.
• Entrada de energia DC 9V: Connect a 9V DC power adapter (center negative, 300mA minimum).

Imagem: Traseira view of the MOOER UK Gold 900 Micro Preamp, showing the 9V DC power input.

Imagem: Lado view of the MOOER UK Gold 900 Micro Preamp, illustrating the input and output jacks.

Configurar

1. Conexão de energia: Connect a 9V DC power adapter (center negative, 300mA minimum) to the DC 9V input jack on the rear of the unit. Ensure the power supply meets these specifications to prevent damage.
2. Conexão do instrumento: Connect your guitar or other instrument to the INPUT jack on the right side of the preamp usando um cabo de instrumento padrão de 1/4 de polegada.
3. Conexão de saída: Connect the OUTPUT jack on the left side of the preamp para o seu amplifier's input, effects loop return, or an audio interface/mixer.
4. Configurações iniciais: Before powering on, set all control knobs (TRE, MID, BASS, GAIN, VOL) to their minimum positions to avoid sudden loud sounds.
5. Ligar: Once all connections are secure, apply power to the unit. The LED indicator will illuminate.

Instruções de operação

Seleção de canais

The UK Gold 900 features two channels, A and B, each with independent EQ, Gain, and Volume settings.

• To switch channels: Briefly press the CH/CAB button. The LED color will change to indicate the active channel (e.g., green for Channel A, red for Channel B).

Speaker Cabinet Simulation

O préamp includes an integrated speaker cabinet simulation, which is useful for direct recording or connecting to a PA system.

• To toggle cabinet simulation: Press and hold the CH/CAB button for approximately 2 seconds. The LED will flash to indicate the change.

Modos de pedal

The footswitch can operate in two different modes:

1. Modo Ligado/Desligado: In this mode, the footswitch acts as a bypass, turning the preamp efeito ligado ou desligado.
2. Modo Canal A/B: In this mode, the footswitch switches between Channel A and Channel B.

Refer to the product's full manual or manufacturer's website for instructions on how to switch between these footswitch modes, as this functionality is typically configured via a hidden switch or specific power-up sequence.

Ajuste de Tom

Adjust the following controls to shape your sound:

• GANHO: Increase for more overdrive and distortion. Decrease for cleaner tones.
• VOAR: Ajuste o volume de saída geral.
• TRE, MID, BASS: Use these three knobs to fine-tune the equalization for your desired tone.

Manutenção

• Limpeza: Use um pano macio e seco para limpar o aparelho. Não utilize produtos de limpeza líquidos ou solventes.
• Armazenar: Armazene o préamp in a dry environment, away from extreme temperatures and direct sunlight.
• Fonte de energia: Always use the specified 9V DC (center negative) power supply. Incorrect power can damage the unit.
• Conexões: Ensure all cables are securely connected but do not overtighten. Disconnect cables when the unit is not in use for extended periods.

Solução de problemas

• Sem som:
  • Verifique todas as conexões dos cabos (entrada, saída, alimentação).
  • Certifique-se de que a fonte de alimentação esteja conectada corretamente e funcionando.
  • Verify that the volume knobs on the preamp e seu ampOs amplificadores não estão definidos como zero.
  • Test with different cables and instruments to rule out faulty equipment.
• Undesired Noise/Buzz:
  • Ensure you are using a regulated 9V DC (center negative) power supply. Unregulated or incorrect power supplies can introduce noise.
  • Check for ground loops by trying different power outlets or isolating the power supply.
  • Reduce gain settings if the noise is excessive distortion.
  • Certifique-se de que todos os cabos estejam blindados e em boas condições.
• Pedal não responde:
  • Certifique-se de que a unidade está ligada.
  • If the footswitch mode is set to Channel A/B, it will not bypass the effect.

Especificações

Garantia e Suporte

Para informações sobre garantia e suporte técnico, consulte o site oficial da MOOER. website or contact your authorized MOOER dealer. Keep your purchase receipt as proof of purchase for warranty claims.

MOOER Official Website: www.mooeraudio.com