Saramonic SR-M3 Mini Directional Condenser Microphone User Manual

Introdução

This manual provides detailed instructions for the proper setup, operation, and maintenance of your Saramonic SR-M3 Mini Directional Condenser Microphone. The SR-M3 is designed to enhance audio recording quality for DSLR cameras and camcorders, featuring an integrated shockmount, low-cut filter, and audio gain switches.

Produto acimaview

The Saramonic SR-M3 is a compact and lightweight directional condenser microphone. It is equipped with several features to optimize your audio recording experience.

Principais características:

Directional condenser microphone for focused audio capture.
Integrated shockmount to minimize handling noise.
Switchable +10dB audio gain for boosting signal levels.
Switchable 200 Hz low-cut filter to reduce unwanted low-frequency noise.
Additional 3.5mm microphone input for connecting a secondary microphone.
3.5mm headphone monitor jack for real-time audio monitoring.
Powered by a single AAA battery.

Saramonic SR-M3 microphone with specifications

Image: The Saramonic SR-M3 microphone, highlighting its directional condenser type, frequency range, sensitivity, signal-to-noise ratio, battery type, and output.

Configurar

1. Instalação da bateria

Locate the battery compartment on the microphone body.
Open the compartment and insert one (1) AAA battery, ensuring correct polarity (+/-).
Feche o compartimento da bateria com segurança.

2. Montagem do Microfone

Slide the integrated shoe-mount of the SR-M3 into the hot shoe or cold shoe mount on your DSLR camera or camcorder.
Tighten the locking wheel on the shoe-mount to secure the microphone in place.

Image: The Saramonic SR-M3 microphone shown mounted on a camera, demonstrating its compact and lightweight design.

3. Conectando ao seu dispositivo

Connect the supplied 3.5mm TRS output cable from the microphone's output jack to the microphone input jack on your DSLR camera or camcorder.

Saramonic SR-M3 with 3.5mm TRS output cable connected

Imagem: Close-up view of the Saramonic SR-M3 showing the 3.5mm TRS output cable connected, alongside the headphone input jack.

Instruções de operação

1. Ligar / desligar

Locate the power switch on the microphone. Slide it to the "ON" position to power on the microphone. Slide it to "OFF" when not in use to conserve battery life.

2. Using the +10dB Audio Gain Switch

The SR-M3 features a +10dB audio gain switch. This switch boosts the microphone's output level, which can be useful in situations where the camera's preamps are noisy or when recording quiet sound sources. Engage this switch if your audio levels are too low.

3. Using the 200 Hz Low-Cut Filter Switch

The 200 Hz low-cut filter (also known as a high-pass filter) reduces low-frequency sounds such as rumble, wind noise, or air conditioning hum. Engage this switch when recording in environments with unwanted low-frequency interference.

Saramonic SR-M3 with +10dB gain and low-cut filter switches

Image: The Saramonic SR-M3 microphone showing the +10dB Audio Gain Switch and the 200 Hz Low-Cut Filter Switch.

4. Connecting an External Microphone (Optional)

The SR-M3 includes an extra 3.5mm microphone input. This allows you to connect a second microphone, such as a lavalier microphone, for dual-source recording. The audio from both microphones will be mixed into a single stereo track.

5. Monitoramento de áudio

Connect headphones to the 3.5mm headphone monitor jack to listen to your audio in real-time. This is crucial for ensuring proper audio levels and identifying any potential issues during recording.

Saramonic SR-M3 connected to headphones for monitoring

Image: The Saramonic SR-M3 microphone mounted on a camera, with headphones connected to the monitoring jack, illustrating real-time audio monitoring.

Manutenção

Limpeza: Use um pano macio e seco para limpar o corpo do microfone. Evite usar produtos químicos agressivos ou materiais abrasivos.
Cuidados com a bateria: Remove the AAA battery if the microphone will not be used for an extended period to prevent leakage and damage.
Armazenar: Store the microphone in a dry, dust-free environment, away from extreme temperatures.
Para-brisas: Periodically check the foam windscreen for wear and tear. Replace if necessary to maintain optimal performance.

Solução de problemas

Problema	Possível causa	Solução
Sem saída de áudio	Microfone não está ligado. Bateria descarregada ou instalada incorretamente. Cabo não conectado corretamente. Camera audio input settings incorrect.	Ensure power switch is "ON". Substitua a bateria ou verifique a polaridade. Verify 3.5mm cable is securely connected to both microphone and camera. Check camera's audio input level and source settings.
Low audio level	+10dB gain switch is off. Camera input level too low. Microfone muito longe da fonte sonora.	Engage the +10dB gain switch. Increase camera's audio input level. Position microphone closer to the sound source.
Excessive background noise/rumble	Low-cut filter is off. Environmental low-frequency noise.	Engage the 200 Hz low-cut filter switch. Use the included foam windscreen. Grave em um ambiente mais silencioso, se possível.

Especificações

Recurso	Detalhe
Tipo de microfone	Directional Condenser
Padrão polar	Unidirecional
Faixa de frequência	75 Hz - 18 kHz
Sensibilidade	-37dB +/- 1dB
Relação sinal-ruído	75 dB NPS
Saída	3.5 mm TRS
Fonte de energia	1 x pilha AAA
Dimensões (C x L x A)	5.5 x 2.3 x 1.6 polegadas (14 x 5.8 x 4.1 cm)
Peso	2.1 oz (30g) / 2.4 ounces (68g)
Material	Metal, Borracha
Dispositivos compatíveis	DSLR Cameras, Camcorders
Componentes incluídos	SR-M3 microphone

Garantia e Suporte

For warranty information or technical support, please refer to the official Saramonic webAcesse o site ou entre em contato diretamente com o atendimento ao cliente. Guarde o recibo de compra como comprovante para solicitações de garantia.