Introdução
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Orbit B-hyve Indoor/Outdoor 12 Station WiFi Sprinkler System, model 57950, and the accompanying 12 Rain Catch Cups. Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the lifespan of your product.
Image: The Orbit B-hyve Indoor/Outdoor 12 Station WiFi Sprinkler System (left) with its control panel and display, alongside a white Orbit Rain Catch Cup with a green stake (right).
Informações importantes de segurança
Observe sempre as seguintes precauções de segurança para reduzir o risco de lesões ou danos:
- Leia todas as instruções cuidadosamente antes da instalação e operação.
- Desligue a energia antes de realizar qualquer manutenção ou instalação elétrica.
- Ensure the product is installed in a location protected from direct water spray, unless specifically designed for outdoor exposure.
- Use only approved wiring and connectors.
- Keep children away from the sprinkler system during operation.
Configuração e instalação
Conteúdo da embalagem:
- Orbit B-hyve 12-Station WiFi Sprinkler Timer
- Adaptador de energia
- Acessórios de montagem (parafusos, buchas)
- 12 Rain Catch Cups
- Guia de início rápido
Montando o temporizador:
- Choose a suitable indoor or outdoor location near a power outlet and away from direct sunlight or extreme weather.
- Mark the desired mounting points using the timer as a template.
- Faça furos-guia e insira buchas de parede, se necessário.
- Secure the timer to the wall using the provided screws.
Wiring the Sprinkler Valves:
Connect your sprinkler valve wires to the corresponding terminals on the B-hyve timer. Each station (1-12) corresponds to a specific zone. Ensure the common wire from your valves is connected to the "COMMON" terminal.
- Fio comum: Connect to the terminal labeled "COMMON".
- Fios de zona: Connect each zone wire to its respective numbered terminal (1-12).
- Master Valve/Pump Start (if applicable): Connect to the terminal labeled "MV" or "PUMP".
Conexão de energia:
Plug the power adapter into the timer's power input port, then plug the adapter into a standard electrical outlet. The timer display should illuminate.
Rain Catch Cup Installation:
The included rain catch cups are used to measure precipitation and help calibrate your sprinkler system for optimal water efficiency. Distribute the 12 cups evenly across your lawn or garden areas, ensuring they are placed in open spaces away from obstructions like trees or buildings that might block rain or sprinkler spray.
- Insert the green stake into the ground until the cup is stable and upright.
- Ensure the top of the cup is level with the ground for accurate measurement.
Instruções de operação
Initial Setup and WiFi Connection:
- Download the "B-hyve" app from the Apple App Store or Google Play Store.
- Create an account and follow the in-app instructions to add your new B-hyve timer.
- The app will guide you through connecting the timer to your home WiFi network.
Horários de programação:
The B-hyve system offers flexible programming options via the app or directly on the timer.
- Rega Inteligente: Utilize the app's smart watering feature, which uses local weather data to automatically adjust watering schedules.
- Programas manuais: Create custom watering schedules with specific start times, run times, and days of the week for each zone.
- Atraso devido a chuva: Use the "RAIN DELAY" button on the timer or the app to pause watering for a set period (24, 48, or 72 hours) in anticipation of rain.
Operação manual:
You can manually run a single zone or all zones directly from the timer or the app.
- No temporizador: Navigate to "MANUAL" using the dial, select the zone(s) and desired run time, then press "START".
- Através do aplicativo: Select the desired zone(s) and initiate a manual run from the app interface.
Manutenção
- Limpeza: Limpe periodicamente a parte externa do temporizador com um produto de limpeza.amp pano. Não utilize produtos de limpeza abrasivos nem mergulhe a unidade em água.
- Winterização: In freezing climates, disconnect the timer from power and drain all water from the system to prevent freeze damage to pipes and valves. Store the timer indoors during winter months.
- Rain Catch Cups: Regularly empty and clean the rain catch cups to ensure accurate readings. Remove any debris that may accumulate inside.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| O visor do cronômetro está em branco. | Não há problema com a energia ou com o adaptador de energia. | Check power outlet, ensure adapter is securely connected. |
| Zona sem rega. | Wiring issue, faulty valve, or low water pressure. | Verify wiring connections, check valve operation, ensure main water supply is on. |
| Não consigo conectar ao Wi-Fi. | Incorrect WiFi password, weak signal, or router issue. | Double-check password, move timer closer to router, restart router. |
| O atraso por chuva não está funcionando. | Incorrect setting or system override. | Ensure rain delay is active and not overridden by a manual run. |
Especificações
- Modelo: 57950
- Marca: Órbita
- Número de estações: 12
- Conectividade: Wi-Fi (2.4 GHz)
- Material: Plástico
- Cor: Branco
- Indoor/Outdoor Rating: Sim
- Código UPC: 816602020007
- ASIN: B06XT21KD7
Informações de garantia
Orbit products are manufactured to high quality standards. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official Orbit website. Guarde o recibo de compra como comprovante para solicitações de garantia.
Suporte ao cliente
For technical assistance, troubleshooting, or general inquiries, please contact Orbit customer support:
- Website: www.orbitonline.com
- Telefone: Consulte a embalagem do produto ou webSite para os números de contato mais atualizados.
- Suporte App: Many common issues can be resolved through the B-hyve app's help section.
