Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer User Manual

1. Introdução

This manual provides essential information for the safe and efficient operation of your Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This printer is designed for various label printing applications, offering both thermal transfer and direct thermal printing capabilities at 203 dpi resolution. It features an LCD display for easy navigation, a tear-off function, a real-time clock, and multiple connectivity options including USB 2.0, two USB host ports, and LAN.

Figure 1: Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This image shows the compact desktop printer with its LCD display and label output slot.

2. Informações de segurança

Please read all safety instructions before operating the printer to prevent injury or damage to the device. Keep this manual for future reference.

• Utilize apenas o cabo de alimentação fornecido com a impressora.
• Não exponha a impressora à água ou umidade excessiva.
• Certifique-se de que a impressora esteja colocada em uma superfície estável e nivelada.
• Evite bloquear as aberturas de ventilação.
• Disconnect power before cleaning or servicing the printer.
• Não tente abrir ou consertar a impressora por conta própria. Consulte um técnico qualificado.

3. Conteúdo da embalagem

Verifique se todos os itens estão presentes na embalagem:

• Intermec PC43TB01100201 Printer Unit
• Cabo de alimentação dos EUA
• Guia de Início Rápido (não incluído neste manual)
• Software/Driver CD (may vary by package)

4. Configuração

4.1 Desembalagem e Colocação

1. Retire cuidadosamente a impressora da embalagem.
2. Place the printer on a flat, stable surface with adequate ventilation.
3. Ensure easy access to power outlets and computer ports.

4.2 Conexão de energia

1. Connect the supplied US power cord to the printer's power input.
2. Conecte a outra extremidade do cabo de alimentação a uma tomada elétrica aterrada.

4.3 Conectando a um Computador

The PC43TB01100201 printer supports USB and LAN connectivity.

• Conexão USB: Connect a USB cable (not always included) from the printer's USB 2.0 port to an available USB port on your computer.
• Conexão LAN: Connect an Ethernet cable (not always included) from the printer's LAN port to your network router or switch.

4.4 Loading Media (Labels/Ribbon)

Refer to the printer's internal diagrams or quick start guide for specific instructions on loading labels and, if using thermal transfer, the ribbon. Ensure the media is correctly aligned for proper printing.

• Abra a tampa da impressora.
• Place the label roll onto the media supply spindle.
• Feed the labels through the media guides.
• If using thermal transfer, install the ribbon according to the printer's instructions.
• Feche a tampa da impressora.

5. Instruções de operação

5.1 Ligar/Desligar

• Para ligar: Pressione o botão liga/desliga localizado na impressora. O visor LCD acenderá.
• Para desligar: Mantenha pressionado o botão liga/desliga até que a impressora desligue.

5.2 Utilizando o visor LCD

The LCD display provides status information and allows for configuration changes. Navigate through menus using the control buttons (Push Button Controller Type) adjacent to the display.

• View printer status and error messages.
• Adjust settings such as print darkness, speed, and media type.
• Perform calibration for new media rolls.

5.3 Impressão

Once the printer is connected to your computer and drivers are installed, you can print labels from compatible software applications. The printer supports Latin fonts.

1. Abra o software ou aplicativo de design de etiquetas.
2. Create or open the label design.
3. Select the Intermec PC43TB01100201 as your printer.
4. Adjust print settings as needed (e.g., number of copies, print quality).
5. Inicie o trabalho de impressão.

The printer features a tear-off function for easy label separation after printing.

6. Manutenção

6.1 Limpando a Impressora

A limpeza regular ajuda a manter a qualidade de impressão e prolonga a vida útil da impressora.

• Cabeça de impressão: Clean the printhead with an alcohol swab or printhead cleaning wipe when print quality degrades or after every few media roll changes. Ensure the printer is off and cool.
• Rolo de impressão: Clean the platen roller with an alcohol swab to remove adhesive residue or dust.
• Exterior: Limpe o exterior com um pano macio e seco.amp pano. Não use produtos de limpeza abrasivos.

6.2 Replacing Media and Ribbon

Replace media rolls and thermal transfer ribbons as they run out. Follow the loading instructions in Section 4.4.

7. Solução De Problemas

This section addresses common issues you might encounter. For more complex problems, contact Intermec support.

• Impressora não responde:
  • Verifique as conexões de energia.
  • Verify USB or LAN cable connections.
  • Restart the printer and computer.
  • Ensure printer drivers are correctly installed.
• Má qualidade de impressão:
  • Clean the printhead (refer to Section 6.1).
  • Adjust print darkness settings via the LCD display or printer driver.
  • Ensure correct media type is selected.
  • Check if the ribbon (for thermal transfer) is correctly installed and not depleted.
• Etiquetas não estão sendo exibidas corretamente:
  • Reload media, ensuring it is properly aligned in the guides.
  • Calibrate the printer for the loaded media type.
  • Check for any obstructions in the media path.
• LCD Display Error Messages:
  • Consult the printer's on-screen help or the full user manual for specific error code meanings and resolutions.

8. Especificações

9. Garantia e Suporte

For detailed warranty information, please refer to the documentation provided with your purchase or contact your reseller. Intermec provides support for its products.

• Fabricante: Intermec
• Número do modelo: PC43TB01100201
• For technical assistance, visit the official Intermec support website ou entre em contato com o atendimento ao cliente.