SanDisk Ultra 3D NAND 2TB Internal SSD Instruction Manual

1. Introdução

This manual provides comprehensive instructions for the installation, operation, and maintenance of your SanDisk Ultra 3D NAND 2TB Internal SSD. Designed for enhanced performance and reliability, this solid-state drive is an ideal upgrade for various computing platforms.

Figura 1: parte superior view of the SanDisk Ultra 3D NAND SSD.

2. Produto acabadoview

The SanDisk Ultra 3D NAND SSD offers accelerated performance for computing tasks, including gaming and multitasking with graphics-intensive applications. It utilizes 3D NAND technology for improved endurance and reliability.

Principais características:

• Accelerated Performance: Faster boot-up, shorter application load times, and quicker data transfers.
• Altas velocidades: Sequential read speeds up to 560MB/s and sequential write speeds up to 530MB/s.
• 3D NAND Technology: Provides greater endurance and reliability while consuming less power.
• NCache 2.0 Technology: Delivers consistent, blazing-fast speeds.
• Durabilidade: Proven shock and vibration resistance.

Figure 2: SanDisk Ultra 3D SSD emphasizing performance and technology.

3. Configuração e instalação

3.1 General Internal Installation (Laptop/Desktop)

The SanDisk Ultra 3D SSD is designed for easy internal installation in compatible laptops and desktop PCs. Ensure your system supports a 2.5-inch SATA III drive.

1. Dados de backup: Before beginning, back up all important data from your existing drive.
2. Desligar: Shut down your computer and disconnect all power sources.
3. Baía de acesso à entrada de veículos: Open your computer case or laptop drive bay. Refer to your computer's manual for specific instructions.
4. Remove Old Drive (if applicable): Disconnect the SATA data and power cables from your old drive and remove it from the bay.
5. Instalar SSD: Secure the SanDisk Ultra 3D SSD into the 2.5-inch drive bay.
6. Cabos de conexão: Connect the SATA data cable and SATA power cable to the SSD.
7. Remontar: Close your computer case or laptop drive bay.
8. Ligar: Reconnect power and boot your computer.

Figure 3: Installation of the SSD into a laptop.

Figure 4: Installation of the SSD into a desktop computer.

3.2 External Enclosure Setup

The SanDisk Ultra 3D SSD can be used as a high-performance external storage solution with a compatible 2.5-inch USB 3.0 (or higher) external enclosure.

1. Recinto aberto: Open the external SSD enclosure.
2. Insira o SSD: Carefully slide the SanDisk Ultra 3D SSD into the enclosure's SATA connector.
3. Seguro: Close and secure the enclosure.
4. Conectar ao computador: Connect the enclosure to your computer using a USB cable.

Figure 5: SanDisk Ultra 3D SSD ready for installation into a drive bay or external enclosure.

3.3 Formatting the SSD

After physical installation, the SSD must be formatted before use. The process varies slightly depending on your operating system.

• Windows: Use Disk Management to initialize the disk, create a new simple volume, and format it (e.g., NTFS).
• MacOS: Use Disk Utility to erase and format the drive (e.g., APFS or Mac OS Extended).

For a visual guide on installation and formatting, refer to the video below:

Video 1: Demonstrates the installation of the SanDisk Ultra 3D SSD into a laptop and a desktop computer, highlighting faster boot-up, application response, and handling of large graphic files.

Video 2: Illustrates how to create a portable external SSD using the SanDisk Ultra 3D SSD and an enclosure, including formatting on a Mac system and speed testing.

4. Instruções de operação

Once installed and formatted, your SanDisk Ultra 3D SSD will function as a primary or secondary storage device. You will experience significantly faster boot times, quicker application launches, and improved overall system responsiveness compared to traditional hard drives. For optimal performance, ensure your operating system and drivers are up to date.

5. Manutenção

To maintain the health and performance of your SanDisk Ultra 3D SSD, it is recommended to:

• Use SanDisk SSD Dashboard: Download and install the SanDisk SSD Dashboard software from the official SanDisk website. This tool provides health monitoring, firmware updates, and performance optimization features.
• Evite a desfragmentação: Unlike HDDs, SSDs do not benefit from defragmentation. It can reduce the lifespan of the drive.
• Ensure TRIM is Enabled: TRIM helps maintain SSD performance over time. Most modern operating systems enable TRIM by default for SSDs.

6. Solução De Problemas

Desempenho lento:

If you experience slower-than-expected performance, consider the following:

• Porta SATA: Ensure the SSD is connected to a SATA III (6 Gb/s) port on your motherboard for maximum speed. Connecting to an older SATA II port will limit performance.
• Motoristas: Verifique se os drivers SATA da sua placa-mãe estão atualizados.
• TRIM Status: Check if TRIM is enabled for your SSD.
• Recursos do sistema: Other system components (CPU, RAM) can impact overall performance. Ensure they are not bottlenecks.

Unidade não detectada:

If the SSD is not detected by your system:

• Conexões de cabo: Double-check that the SATA data and power cables are securely connected to both the SSD and the motherboard/power supply.
• Configurações da BIOS/UEFI: Enter your system's BIOS/UEFI settings and ensure the SATA port the SSD is connected to is enabled.
• Initialization/Formatting: For new drives, ensure it has been initialized and formatted via Disk Management (Windows) or Disk Utility (macOS).

7. Especificações

8. Garantia e suporte

The SanDisk Ultra 3D NAND SSD comes with a Limited 5-year manufacturer warranty or 500TBW (Terabytes Written), whichever is sooner (for the 2TB model in the US). For detailed warranty information specific to your region and to access technical support, please visit the official SanDisk website.

For further assistance, you may also contact SanDisk customer support directly.