Manual do usuário do porta-copos da poltrona reclinável Emomo HX43HRL-1

Introdução

This manual provides detailed instructions for the installation, operation, and maintenance of your Emomo Recliner Cup Holder, Model HX43HRL-1. This cup holder is designed to integrate into recliners and sofas, offering convenient beverage storage with integrated blue LED lighting and touch sensor controls for your recliner's lift mechanism.

Informações de segurança

Ensure all power connections are secure and correctly installed to prevent electrical hazards.
Do not expose the cup holder to excessive moisture or liquids beyond its intended use.
Keep children away from the wiring and connectors during installation.
If any damage is observed, discontinue use and contact customer support.

Conteúdo da embalagem

Emomo Recliner Cup Holder (Model HX43HRL-1)
Integrated 8-pin connector cable

Note: A control box (Part # JCTBOX014) may be required for dual cup systems or specific recliner models. This item is sold separately.

Produto acimaview

The Emomo Recliner Cup Holder features an integrated design with touch-sensitive controls and LED illumination. Familiarize yourself with the components:

Principal view of Emomo Recliner Cup Holder with blue LED light and touch controls

Figura 1: parte superior View of Cup Holder Controls

This image displays the top surface of the Emomo Recliner Cup Holder. The cup holder features a circular design with a blue LED light illuminating the interior rim. Around the rim, there are four touch-sensitive icons: a power symbol (lockout), a light bulb symbol (LIGHT), an upward-pointing hand symbol (OPEN), and a downward-pointing hand symbol (CLOSE). These icons indicate the touch sensor controls for the cup holder's functions and the recliner's lift mechanism.

Lado view of Emomo Recliner Cup Holder with 8-pin connector cable

Figura 2: Lateral View with Connector Cable

Esta imagem mostra uma lateral view of the Emomo Recliner Cup Holder. The main body of the cup holder is black plastic. Extending from the bottom is a black electrical cable, neatly coiled, terminating in a round, 8-pin male connector. This connector is used to interface with the recliner's power system or a control box.

Iluminação LED: Blue LED illuminates the inside of the cup holder.
Controles do sensor de toque:
- LUZ: Activates/deactivates the blue LED light.
- ABRIR: Initiates the recliner's lift mechanism to open/recline.
- FECHAR: Initiates the recliner's lift mechanism to close/return to upright position.
Função de bloqueio: A dedicated button to disable the touch sensors, preventing accidental activation.
Conector de 8 pinos: Standard round connector for power and control signals.

Configuração e instalação

Desconexão de energia: Before beginning installation, ensure the recliner or sofa is unplugged from its power source to prevent electrical shock.
Localize o ponto de instalação: Identify the designated opening in your recliner or sofa for the cup holder.
Insert Cup Holder: Carefully insert the Emomo Recliner Cup Holder into the opening. Ensure it sits flush with the surface.
Conectar a fiação:
- Locate the existing wiring harness or control box in your recliner.
- Connect the 8-pin connector from the cup holder to the corresponding 8-pin port on your recliner's motor or control box (e.g., JCTBOX014). Ensure the connection is firm and secure.
- For dual cup systems, ensure both cup holders are correctly connected to the control box, which then connects to the recliner's motor.
Fiação segura: Route and secure any loose wiring to prevent interference with moving parts of the recliner.
Religação de energia: Once all connections are secure, plug the recliner back into its power source.
Funcionalidade de teste: Test all functions of the cup holder and recliner lift mechanism as described in the "Operating Instructions" section.

Instruções de operação

The Emomo Recliner Cup Holder features intuitive touch controls:

Activating/Deactivating LED Light:
- Toque suavemente o LUZ icon (light bulb symbol) on the cup holder.
- The blue LED light inside the cup holder will turn on or off with each touch.
Operating Recliner Lift Mechanism:
- To recline or open the chair, gently touch and hold the ABRIR icon (upward-pointing hand symbol). Release when the desired position is reached.
- To close or return the chair to an upright position, gently touch and hold the FECHAR icon (downward-pointing hand symbol). Release when the desired position is reached.
Using the Lockout Function:
- To prevent accidental activation of the touch sensors, touch the Bloqueio icon (power symbol).
- When activated, the other touch sensors (LIGHT, OPEN, CLOSE) will be temporarily disabled.
- Toque o Bloqueio icon again to re-enable the touch sensors.

Manutenção

Limpeza: Use um pano macio e macioamp cloth to wipe the surface of the cup holder. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
Derramamentos de líquidos: In case of a liquid spill, immediately disconnect power to the recliner. Wipe up the spill and allow the unit to dry completely before reconnecting power.
Inspeção: Inspecione periodicamente a fiação e as conexões para verificar se há sinais de desgaste ou danos.

Solução de problemas

Problema	Possível causa	Solução
A luz LED não acende.	A poltrona reclinável não tem energia. Conexão frouxa. Lockout function is active.	Certifique-se de que a poltrona reclinável esteja conectada à tomada e que a tomada esteja funcionando. Check the 8-pin connector for a secure fit. Deactivate the lockout function by touching the power symbol.
Recliner lift mechanism does not respond.	A poltrona reclinável não tem energia. Conexão frouxa. Lockout function is active. Issue with recliner motor or control box.	Certifique-se de que a poltrona reclinável esteja conectada à tomada e que a tomada esteja funcionando. Check the 8-pin connector for a secure fit. Deactivate the lockout function by touching the power symbol. Consult your recliner's manual or contact recliner manufacturer for motor/control box issues.
Touch sensors are unresponsive.	Lockout function is active. Surface is dirty or wet.	Deactivate the lockout function. Clean the touch sensor area with a dry, soft cloth.

Especificações

Número do modelo:	HX43HRL-1
Marca:	Emomo
Dimensões:	4 x 5 x 6 polegadas (aproximadamente)
Peso:	8 onças (aproximadamente)
Material:	Plástico
Cor:	Preto
Tipo de conector:	Round 8-Pin
Características:	Blue LED Lighting, Touch Sensor Controls (Open/Close, Light, Lockout)
Compatible Control Box (Optional):	JCTBOX014 (for dual cup systems)

Informações de garantia

Emomo products are manufactured to high-quality standards. This product comes with a limited warranty against defects in materials and workmanship under normal use. The specific terms and duration of the warranty may vary. Please retain your proof of purchase for warranty claims.

For detailed warranty information, please contact Emomo customer support.

Suporte ao cliente

If you have any questions, require assistance with installation, or encounter issues not covered in this manual, please contact Emomo customer support for further assistance.

Please have your product model number (HX43HRL-1) and proof of purchase ready when contacting support.

	Manual do usuário do sistema de áudio Bluetooth eMoMo Remo4 Manual do usuário do sistema de áudio Bluetooth eMoMo Remo4, detalhando avisos de segurança, operação básica, especificações e solução de problemas.
	Manual do usuário do eMoMo 39ER(B) Manual do usuário para o componente de mesa inteligente eMoMo 39ER(B), painel de detalhes sobreview, botões, funções, operações básicas, parâmetros do produto e solução de problemas.
	Manual do usuário do iTable 3 - eMoMo Smart Tabletop Manual do usuário completo do eMoMo iTable3 Smart Tabletop, detalhando suas funções, etapas de operação, solução de problemas e parâmetros do produto. Aprenda a usar o carregamento sem fio, o áudio Bluetooth e a sincronização do console.
	ICP多功能杯座:安装、操作与规格指南 ICP多功能杯座安装操作指南,包含产品功能介绍、安装步骤、操作说明、技术规格及FCC合规声明，提供无线充电与USB快充。
	Guia do usuário do porta-copos 2 em 1 da CYBEX Instruções e avisos de segurança para o porta-copos 2 em 1 da CYBEX, compatível com os carrinhos de bebê AVI, ZENO, PRIAM, E-PRIAM e MIOS. Aprenda a usar e fixar o porta-copos corretamente.
	eMoMo E107A Sound System: Assembly, Operation, and FCC Information A comprehensive guide for the eMoMo E107A sound system, detailing assembly, connection options, remote control functions, wireless charging, and FCC compliance statements.

Emomo HX43HRL-1