1. Introdução
This manual provides essential information for the proper installation, operation, and maintenance of your Genius 6100334 Echo TX4 2-Channel 433 MHz Transmitter. Please read these instructions carefully before using the device to ensure safe and efficient operation.
The Genius Echo TX4 is a 4-channel rolling code transmitter designed for secure operation, protecting against unauthorized copying. It features a comfortable, ergonomic design with intuitive buttons and a highly visible red signal LED. It operates at a frequency of 433 MHz and is powered by a 12V battery. This product includes all necessary safety certificates and instruction manuals for use and maintenance.
2. Produto acabadoview
The Genius Echo TX4 is a compact and reliable remote control for various applications, primarily garage door and gate openers. Its rolling code technology enhances security by changing the transmission code with each use.
Principais características:
- Operação em 4 canais: Allows control of up to four different devices or functions.
- Rolling Code (RC) Technology: Provides enhanced security against code duplication.
- Frequência de operação: 433 MHz.
- Design ergonômico: Confortável de segurar e usar.
- Feedback visual: Highly visible red signal LED indicates transmission.
- Fonte de energia: Bateria de 12V.
Componentes do produto:
Figura 1: Frente view of the Genius Echo TX4 transmitter. This image displays the four oval control buttons and the red signal LED at the top right. The "GENIUS" logo is visible at the bottom left.
Figura 2: Voltar view of the Genius Echo TX4 transmitter. This image shows the label with product information including "6100334 (ECHO TX4 RC)", "433 MHz", "Made in Bulgaria", and "Designed in Italy", along with manufacturer details.
3. Configuração e Programação
The programming procedure for the Genius Echo TX4 transmitter typically involves interaction with the receiver unit of your gate or garage door opener. The specific steps can vary depending on the model of your receiver.
General Programming Guidance:
- Consult Receiver Manual: Always refer to the instruction manual of your specific gate or garage door receiver for detailed programming steps. The programming type is typically "Refer to the receiver."
- Receptor de acesso: You will usually need to access the receiver unit, which is often located within the motor housing of your gate or garage door system.
- Initiate Learning Mode: Most receivers have a "Learn" or "Program" button. Pressing this button for a short duration (as specified in your receiver's manual) will put the receiver into learning mode.
- Código de transmissão: While the receiver is in learning mode, press the desired button on your new Genius Echo TX4 transmitter. The receiver's LED indicator will typically flash or change color to confirm successful programming.
- Operação de teste: After programming, test the transmitter to ensure it operates the gate or garage door correctly.
Nota importante: For installations in apartments or shared access systems, the control unit may be locked by the original installer. In such cases, only the installer has the necessary code to program new remotes. If you are unable to program the remote, it is likely due to this lock, and the remote is not defective. Please contact the original installer for assistance.
Instalação da bateria:
The Genius Echo TX4 uses a 12V battery. To install or replace the battery:
- Abra cuidadosamente o transmissor casing.
- Insira a bateria de 12V, certificando-se da polaridade correta (+/-).
- Feche o casing com segurança.
4. Instruções de operação
Operating the Genius Echo TX4 transmitter is straightforward:
- Selecione o canal: Identify the button on your transmitter that has been programmed to control your specific device (e.g., gate, garage door).
- Aperte o botão: Press and hold the desired button briefly.
- Observe o LED: The red signal LED on the transmitter will illuminate during transmission, indicating that a signal is being sent.
- Botão de liberação: Release the button once the device begins to respond.
The rolling code system ensures that a different code is transmitted each time the button is pressed, enhancing security.
5. Manutenção
The Genius Echo TX4 transmitter requires minimal maintenance to ensure long-term performance.
Substituição da bateria:
When the red signal LED becomes dim or the transmitter's range decreases, it is likely time to replace the 12V battery. Follow the battery installation steps outlined in Section 3.
Limpeza:
Clean the transmitter with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the casing ou componentes internos.
Armazenar:
Store the transmitter in a dry place, away from extreme temperatures and direct sunlight, when not in use for extended periods.
6. Solução De Problemas
If your Genius Echo TX4 transmitter is not functioning as expected, consider the following troubleshooting steps:
- Transmissor não responde:
- Check the battery. A weak or dead 12V battery is a common cause of malfunction. Replace if necessary.
- Ensure you are within the operating range of the receiver.
- Verify that the correct button is being pressed for the intended device.
- Problemas de programação:
- Re-read the programming instructions for your receiver unit carefully.
- Confirm that the receiver is in learning mode during the programming attempt.
- Installer Lock: As mentioned in Section 3, if the system is part of an apartment or shared access installation, the receiver might be locked by the original installer. In this scenario, the remote is not faulty, and you must contact the installer for programming assistance.
- Interferência:
- Radio frequency interference from other devices can sometimes affect performance. Try operating the transmitter from a different location.
If problems persist after following these steps, contact a qualified technician or the product manufacturer for further assistance.
7. Especificações
| Marca | Gênio |
| Modelo | ECHO TX4 |
| Número da peça | 6100334 Echo TX4 |
| Frequência de operação | 433 MHz |
| Número de canais | 4 |
| Tipo de Codificação | Rolling Code (RC) |
| Fonte de energia | Bateria 12V |
| Dimensões (C x L x A) | 9.5 x 6.2 x 2.2 cm |
| Peso | 38 g |
| Características especiais | Design ergonômico |
| Receptores compatíveis | 6100238, 6100237, 6100145, 6100323 |
| Dispositivos compatíveis | ADYX TE4433H Blau, Adyx Te4433H, genius 4433H, genius Te4433H Blau, powerdoor te4433h blau |
8. Garantia e Suporte
Specific warranty terms and conditions for the Genius 6100334 Echo TX4 transmitter are typically provided by the retailer at the time of purchase or by the manufacturer. Please retain your proof of purchase for warranty claims.
For technical support, programming assistance beyond the scope of this manual, or warranty inquiries, please contact your authorized Genius dealer or the manufacturer's customer service department. Contact information can usually be found on the product packaging or the manufacturer's official website.
