Manual do usuário da estrutura de mesa elétrica com altura ajustável Flexispot EB2B

1. Introdução

Thank you for choosing the Flexispot EB2B Electric Height-Adjustable Desk Frame. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new desk frame. Please read this manual thoroughly before installation and keep it for future reference.

Image: The Flexispot EB2B desk frame supporting a complete desk setup, highlighting its dual-motor design.

2. Informações de segurança

Para garantir o funcionamento seguro e evitar danos, observe as seguintes precauções de segurança:

• Certifique-se de que todos os componentes estejam bem fixados antes de usar.
• Não exceda a capacidade máxima de peso de 100 kg (220 lbs).
• Mantenha crianças e animais de estimação afastados da mesa durante o funcionamento para evitar ferimentos causados ​​por peças móveis.
• Ensure there are no obstructions in the desk's path when adjusting height. The anti-collision system is designed to prevent damage, but manual vigilance is always recommended.
• Do not disassemble or modify the desk frame or its electrical components. Contact qualified personnel for repairs.
• Desligue a energia antes de limpar ou realizar qualquer manutenção.

Image: Visual representation of the anti-collision system, showing the desk rebounding upon detecting an obstruction.

3. Conteúdo da embalagem

Please verify that all parts are present before beginning assembly:

• Pés da mesa (2)
• Pés (2)
• Barra transversal (1)
• Suportes laterais (2)
• Caixa de controle (1)
• Aparelho/Painel de controle (1)
• Adaptador de energia (1)
• Cabo de alimentação (1)
• Clipes para gerenciamento de cabos (4)
• Ferragens de montagem (parafusos, chaves Allen, etc.)

Image: All main components of the Flexispot EB2B desk frame, including the dual legs, crossbar, and control panel.

4. Configuração e montagem

Follow these steps to assemble your Flexispot EB2B desk frame. It is recommended to have two people for assembly.

1. Prepare a área: Clear a spacious area for assembly. Lay down a soft cloth or cardboard to protect the desk frame and your floor.
2. Attach Feet to Legs: Securely attach the feet to the bottom of each desk leg using the provided screws.
3. Assemble the Crossbar: Connect the two desk legs to the adjustable crossbar. Ensure the crossbar is extended to the desired width to accommodate your tabletop (Min: 110cm, Max: 180cm).
4. Install Side Brackets: Attach the side brackets to the top of the desk legs, which will support your tabletop.
5. Monte a caixa de controle: Secure the control box to the designated area under the crossbar.
6. Cabos de conexão: Connect the motor cables from each leg to the control box. Connect the handset cable to the control box. Finally, connect the power adapter to the control box and the power cord to the adapter.
7. Fixar tampo de mesa: Carefully place your tabletop (not included) onto the assembled frame. Ensure it is centered and aligned. Secure the tabletop to the frame using appropriate screws (ensure screws are not too long to penetrate the tabletop surface). The frame is compatible with tabletops from 110 cm to 180 cm wide and 50 cm to 80 cm deep.
8. Gerenciamento de cabos: Use the provided cable management clips to organize and secure all cables, preventing them from dangling or getting caught.

Image: A diagram illustrating the adaptable desktop sizes (width and depth) that the Flexispot EB2B desk frame can accommodate.

5. Instruções de operação

The Flexispot EB2B features a user-friendly control panel for height adjustment and memory functions.

5.1. Ajuste básico de altura

• Elevar a mesa: Pressione e segure o UP (^) button to raise the desk to your desired height.
• Mesa inferior: Pressione e segure o DOWN (v) button to lower the desk to your desired height.
• The LED display will show the current height in centimeters. The desk operates smoothly and quietly, with a noise level below 50 dB and a lifting speed of 3.2 cm/sec.

5.2. Predefinições de memória

O painel de controle permite salvar até quatro configurações de altura preferidas.

1. Ajuste a mesa à altura desejada usando os botões PARA CIMA/PARA BAIXO.
2. Pressione o 'M' button (or 'S' depending on the model) followed by the desired preset number (1, 2, 3 ou 4). The display will show 'S-' then the number, indicating the height has been saved.
3. To recall a saved height, simply press the corresponding preset number (1, 2, 3 ou 4A mesa se moverá automaticamente para a posição salva.

5.3. Sedentary Reminder System

The advanced control panel includes a sedentary reminder system to encourage healthy work habits. Consult your specific control panel's instructions for activating and setting reminder intervals.

5.4. Sistema Anticolisão

The desk is equipped with an anti-collision system. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly to prevent damage. You can adjust the sensitivity of this system (refer to the detailed control panel manual for specific steps).

Imagem: Uma imagem detalhada view of the control panel, showing the LED display, up/down buttons, and four memory preset buttons.

6. Manutenção

A manutenção regular garante a longevidade e o desempenho ideal da estrutura da sua mesa.

• Limpeza: Limpe a estrutura da mesa com um pano macio e seco.amp cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure the desk is unplugged before cleaning.
• Inspeção: Verifique periodicamente todos os parafusos e conexões para garantir que estejam bem apertados. Reaperte-os, se necessário.
• Verificação do cabo: Certifique-se de que todos os cabos estejam firmemente conectados e sem danos.
• Lubrificação: The lifting mechanism is designed for maintenance-free operation. Do not apply lubricants unless specifically instructed by Flexispot support.

7. Solução De Problemas

If you encounter issues with your Flexispot EB2B desk frame, refer to the following common problems and solutions:

7.1. Procedimento de reinicialização

If the desk is not functioning correctly, a reset may resolve the issue:

1. Pressione e segure o DOWN (v) button until the desk reaches its lowest position and slightly rebounds. Continue holding for approximately 5-10 seconds until the display shows 'RST' or 'RESET'.
2. Release the button. The desk will then move slightly up and down to calibrate. Once the display shows the lowest height (e.g., 71.0), the reset is complete.

8. Especificações

Image: The Flexispot EB2B frame demonstrating its large height adjustment range (70-119 cm) and anti-collision feature.

9. Garantia e Suporte

Flexispot stands behind the quality of its products.

• Garantia do quadro: The desk frame is covered by a Garantia de 5 ano.
• Garantia do motor e do controlador: The motors and controllers are covered by a Garantia de 3 ano.

For warranty claims, technical support, or any questions not covered in this manual, please contact Flexispot customer service through their official website or your point of purchase. Please have your model number (EB2B) and purchase information ready.

Image: Visual representation of the warranty terms: 5 years for the desk frame and 3 years for controllers and motors.