1. Introdução
Obrigado pela compra.asing the MAX LED Partybar4. This versatile RGBW light set is designed to create dynamic and colorful light shows for various events. It features four PAR spots with RGBW LEDs, multiple operating modes, and comes with a sturdy stand for easy setup. This manual provides essential information for safe operation, setup, and maintenance of your device. Please read it thoroughly before use and keep it for future reference.
Image 1.1: The MAX LED Partybar4, showcasing its four PAR spots with vibrant purple illumination.
2. Instruções de segurança
- Leia todas as instruções cuidadosamente antes de operar o dispositivo.
- Guarde este manual para referência futura.
- Certifique-se de que a fonte de alimentação corresponda ao voltage especificado no dispositivo.
- Não exponha o aparelho à chuva ou umidade para evitar incêndio ou choque elétrico.
- Always disconnect from the mains power supply before cleaning or servicing.
- Do not open the housing; there are no user-serviceable parts inside. Refer servicing to qualified personnel.
- Evite a exposição direta dos olhos à fonte de luz, pois isso pode causar danos oculares.
- Garanta ventilação adequada ao redor da unidade para evitar superaquecimento.
- Position the device on a stable surface or mount it securely using appropriate hardware.
3. Produto acabadoview
3.1 Componentes
- LED Partybar4 unit with 4 PAR spots
- Suporte de tripé ajustável
- Controle remoto sem fio
- Cabo de energia
- Manual do usuário
3.2 Principais Características
- 4 PAR spots with RGBW LEDs for vibrant color mixing.
- Plug and Play design for quick setup.
- Multiple operating modes: Sound-activated, Auto, DMX, and Master/Slave.
- Pre-programmed shows for instant effects.
- Controle remoto sem fio para operação conveniente.
- Integrated control panel with LED display for easy settings adjustment.
- Sturdy, adjustable tripod stand with a maximum height of 1.8m.
Image 3.1: The MAX LED Partybar4 with its included wireless remote control, highlighting ease of color and function adjustment.
Imagem 3.2: Detalhada view of the control panel, featuring power input, DMX connections, and the LED display for mode selection.
4. Configuração
4.1 Montagem do suporte
- Unfold the tripod legs and ensure they are fully extended and stable.
- Loosen the height adjustment knob on the stand.
- Extend the central pole to the desired height, ensuring it is securely locked in place. The maximum height is 1.8 meters.
- Aperte firmemente o botão de ajuste de altura.
Image 4.1: The sturdy tripod stand, illustrating its adjustable height mechanism for optimal positioning.
4.2 Mounting the Partybar4 Unit
- Carefully place the Partybar4 unit onto the top of the assembled tripod stand.
- Secure the unit to the stand using the provided mounting hardware (if applicable) to prevent accidental dislodgement.
- Adjust the angle of the PAR spots as desired by loosening and tightening their side knobs.
4.3 Conexão de Energia
- Connect the power cable to the "POWER IN" socket on the Partybar4 unit.
- Plug the other end of the power cable into a suitable mains power outlet.
- Ensure the power switch on the unit is in the "OFF" position before connecting to power.
4.4 Conexão DMX (Opcional)
For advanced control, connect a DMX controller to the "DMX IN" port using a standard 3-pin DMX cable. If linking multiple units, connect the "DMX OUT" of the first unit to the "DMX IN" of the next unit in a daisy chain.
5. Modos de operação
The MAX LED Partybar4 offers several operating modes, which can be selected via the control panel on the unit or the wireless remote control.
5.1 Operação do painel de controle
Use the "MENU", "UP", "DOWN", and "ENTER" buttons on the control panel to navigate through the settings and select your desired mode. The LED display will show the current mode or setting.
5.2 Operação de controle remoto
The included wireless remote control provides convenient access to various functions:
- LIGADO/DESLIGADO: Ligue ou desligue.
- AUTO/MUTE: Activates automatic program mode.
- SOUND/SEEK: Ativa o modo de detecção de som.
- DMX: Selects DMX control mode.
- PAR/FLASH: Controls PAR spot flash function.
- LED/COLOR: Adjusts LED colors or color mixing.
- MOTOR/SEN: Adjusts motor speed or sound sensitivity.
- +/-: Adjusts parameters (speed, sensitivity, DMX address).
5.3 Modo Automático
In Automatic mode, the Partybar4 cycles through pre-programmed light shows. You can adjust the speed of these shows using the remote control or control panel.
Imagem 5.1: Um example of a pre-programmed light show, demonstrating dynamic blue and white light effects.
5.4 Modo ativado por som
In Sound-activated mode, the light effects react to the beat of the music detected by the built-in microphone. Adjust the sensitivity using the remote control or control panel to fine-tune its response.
5.5 Modo DMX
For professional control, use DMX mode. Set the DMX start address via the control panel. The Partybar4 uses 8 DMX channels, allowing precise control over colors, dimming, strobe, and program selection from an external DMX controller.
5.6 Color Mixing
The RGBW LEDs allow for a wide spectrum of colors. In certain modes, you can mix red, green, blue, and white to create custom hues.
Image 5.2: Illustration of RGBW color mixing capabilities, producing a vibrant blue light effect.
6. Manutenção
6.1 Limpeza
- Sempre desconecte o dispositivo da fonte de alimentação antes de limpar.
- Use a soft, lint-free cloth to wipe the exterior of the unit.
- For lenses, use a specialized lens cleaning solution and a soft cloth to avoid scratches.
- Não utilize produtos de limpeza abrasivos ou solventes.
6.2 Armazenamento
- Guarde o dispositivo em um ambiente seco e livre de poeira quando não estiver em uso.
- If storing for extended periods, consider using the original packaging or a protective case.
- Ensure the tripod is collapsed and secured to prevent damage.
7. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Sem energia | Power cable disconnected; power outlet faulty; unit switch off. | Verifique a conexão do cabo de alimentação; tente outra tomada; certifique-se de que o interruptor de energia esteja LIGADO. |
| Lights not responding to music (Sound-activated mode) | Microphone sensitivity too low; music volume too low; incorrect mode selected. | Increase microphone sensitivity; increase music volume; ensure Sound-activated mode is active. |
| Controle remoto não funciona | Battery depleted; obstruction between remote and unit; remote not pointed at IR receiver. | Replace remote control battery (CR2); remove obstructions; ensure remote is pointed at the IR receiver on the unit. |
| problemas de controle DMX | Incorrect DMX address; faulty DMX cable; DMX controller issue; unit not in DMX mode. | Verify DMX address settings; check DMX cable connections; test with another DMX controller; ensure DMX mode is selected on the unit. |
8. Especificações
| Recurso | Detalhe |
|---|---|
| Número do modelo | FestaBar4 |
| Fonte de luz | LEDs RGBW |
| Canais DMX | 8 |
| Modos de operação | Auto, Sound-activated, DMX, Master/Slave |
| Fonte de energia | Cabo de alimentação principal |
| Dimensões do produto | 20 x 20 x 9 cm |
| Peso do item | 7.3 quilos |
| Altura máxima do tripé | 1.8 metros |
| Bateria do controle remoto | 1 bateria CR2 (incluída) |
| Certificações | CE |
9. Vídeo oficial do produto
Video 9.1: A Closer Look at the MAX LED Partybar4. This video provides a detailed visual overview of the product's features and components.
10. Garantia e Suporte
The MAX LED Partybar4 comes with a standard manufacturer's warranty. Please refer to the warranty card included in your packaging for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the MAX customer service department. Keep your proof of purchase for all warranty-related inquiries.
Note: The manual provided with the item may not be available in Dutch. This document serves as a comprehensive English instruction guide.
