Introdução
This manual provides detailed instructions for the setup, operation, and maintenance of your Anderic RR7083T Remote Control. This remote is designed as a direct replacement for original Hampton Bay UC7083T and other compatible ceiling fan remotes, offering seamless control over your fan's speed and lighting functions.
The Anderic RR7083T is compatible with ceiling fans that have the receiver already installed, specifically models using FAN28R and UC7067FMRX receivers.
Produto acimaview
Figure 1: Anderic RR7083T Remote Control. This image shows the black remote control with silver buttons for Light, High, Medium, Low, and Off fan speeds. The Anderic logo and model number RR7083T are visible at the bottom.
Principais características:
- Seamless replacement for original Hampton Bay UC7083T remotes.
- Easy dip-switch setup for quick pairing.
- Controls fan speeds (High, Medium, Low, Off) and light (On/Off).
- Design ergonômico para uso confortável.
- Compatible with FAN28R and UC7067FMRX receivers.
Configuração e instalação
1. Instalação da bateria
The Anderic RR7083T remote requires one CR123A battery (not included). To install the battery:
- Localize a tampa do compartimento da bateria na parte traseira do controle remoto.
- Deslize a tampa para abrir o compartimento.
- Insert one CR123A battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
- Recoloque a tampa do compartimento da bateria.
2. Dip Switch Matching
For the remote to communicate with your ceiling fan receiver, the dip switches on the remote must match those on your fan's receiver. The receiver is typically located in the canopy of the ceiling fan, near the ceiling.
- Access the dip switches on your existing ceiling fan receiver. Make a note of their ON/OFF (or UP/DOWN) positions. There are typically four switches.
- Open the battery compartment of your Anderic RR7083T remote control.
- Locate the four dip switches inside the remote's battery compartment.
- Adjust the switches on the Anderic remote to exactly match the positions of the switches on your fan's receiver. A switch in the 'ON' or 'UP' position can be represented as '1', and 'OFF' or 'DOWN' as '0'.
- If you cannot access your fan's receiver, you may need to try all 16 possible combinations until the remote pairs with your fan.
- 0000, 0001, 0010, 0011
- 0100, 0101, 0110, 0111
- 1000, 1001, 1010, 1011
- 1100, 1101, 1110, 1111
(Where '1' indicates the switch is ON/UP and '0' indicates OFF/DOWN for switches 1, 2, 3, and 4 respectively.)
- Once the switches are matched, replace the battery compartment cover.
Nota importante:
Ensure the power to the ceiling fan is off before attempting to access the receiver's dip switches. Consult your ceiling fan's manual for specific instructions on accessing its receiver.
Instruções de operação
Once the remote is set up, you can control your ceiling fan and light using the following buttons:
| Botão | Função |
|---|---|
| Light (Bulb Icon) | Turns the fan light ON or OFF. For proper dimming, use incandescent bulbs. Non-compliant bulbs may not dim correctly. |
| HI | Define a velocidade da ventoinha para Alta. |
| MÉDICO | Sets the fan speed to Medium. |
| BAIXO | Define a velocidade da ventoinha para Baixa. |
| DESLIGADO | Desliga o ventilador. |
Manutenção
- Limpeza: Limpe o controle remoto com um pano macio e seco. Não utilize produtos de limpeza abrasivos ou solventes.
- Substituição da bateria: Replace the CR123A battery when the remote's performance degrades or it stops responding. Ensure proper polarity during replacement.
- Armazenar: Guarde o controle remoto em local fresco e seco, longe da luz solar direta e de temperaturas extremas.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| O controle remoto não está respondendo. | Bateria descarregada ou instalada incorretamente. | Substitua a bateria CR123A, certificando-se da polaridade correta. |
| Remote not controlling fan/light. | Dip switches do not match the receiver. | Verify and match the dip switch settings on the remote to those on the fan's receiver. Refer to "Setup and Installation" section. |
| Light not dimming properly. | Non-incandescent bulbs are used. | Ensure incandescent bulbs are used for dimming functionality. |
| Interference or erratic behavior. | Other devices operating on similar frequencies. | Try changing the dip switch combination on both the remote and the receiver (if possible) to a new, unused setting. |
Especificações
- Número do modelo: RR7083T
- Dimensões: 5.5 x 3 x 1 polegadas
- Peso: 0.01 onças
- Tipo de Bateria: 1 x CR123A (not included)
- Receptores compatíveis: FAN28R, UC7067FMRX
- Fabricante: Dan's Electronics Etc., Inc.
- Cor: Preto/Prata
- Recurso especial: Ergonômico
Garantia e Suporte
Informações de garantia
The Anderic RR7083T Remote Control comes with a 1-YEAR replacement warrantyEsta garantia cobre defeitos de materiais e de fabricação sob uso normal. Guarde seu comprovante de compra para eventuais solicitações de garantia.
Suporte ao cliente
For technical assistance, troubleshooting, or warranty inquiries, please contact Anderic customer support. Visit the official Anderic webPara obter as informações de contato mais recentes, consulte o site ou a embalagem do produto.
Você também pode visitar o Anderic Store on Amazon Para obter mais informações e produtos.
