Blum B970.1002-5

Blum Blumotion Soft Close Damper

Modelo: B970.1002-5

1. Introdução

Thank you for choosing the Blum Blumotion Soft Close Damper. This product is designed to provide a quiet and gentle closing action for cabinet doors, preventing slamming and reducing wear. This manual provides detailed instructions for the proper installation, operation, and maintenance of your Blumotion dampers.

2. Informações de segurança

3. Conteúdo da embalagem

Seu pacote deve conter os seguintes itens:

4. Instalação

The Blumotion damper is designed for easy installation into a 10mm bullet hole. Follow these steps for optimal performance:

  1. Identificar o local de instalação: Determine the best location on your cabinet frame or door to install the damper. It should be positioned so that the cabinet door makes contact with the damper when closing. Typically, this is on the cabinet frame near the hinge side.
  2. Faça o furo: Using a 10mm drill bit, carefully drill a hole approximately 50mm (2 inches) deep into the chosen location. Ensure the hole is straight and clean.
  3. Insira o Dampé: Gently push the Blumotion damper into the drilled hole. The damper should fit snugly. If it is too loose, the hole may be too large. If it is too tight, do not force it, as this may damage the dampé.
  4. Funcionalidade de teste: Close the cabinet door slowly to ensure it makes contact with the damper and closes softly. Adjust the position if necessary. For optimal soft-closing, multiple dampers may be required for larger or heavier doors.
Blum Blumotion Soft Close Damper, angled view

Figura 1: Angulado view of the Blum Blumotion Soft Close Damper. This image shows the cylindrical body and the grey soft-close tip.

Blum Blumotion Soft Close Damper, straight view

Figure 2: Straight-on view of the Blum Blumotion Soft Close Damper. This image highlights the full length of the damper and its grey tip.

5. Operação

Once installed, the Blumotion damper operates automatically. As the cabinet door closes, it will make contact with the damper's tip. The internal mechanism of the damper will then slow down the door's movement, ensuring a gentle and silent close. No manual adjustment is typically required after proper installation.

6. Manutenção

The Blumotion Soft Close Damper requires minimal maintenance:

7. Solução De Problemas

ProblemaPossível causaSolução
Door does not close softly.Damper not making proper contact with the door, or door is too heavy for a single dampé.Garanta o damper is positioned correctly. For heavier doors, consider installing an additional dampé.
Damper falls out of the hole.Hole is too large, or damper was not fully inserted.Re-insert the damper firmly. If the hole is too large, a small amount of wood glue or a similar adhesive can be used to secure it.
Door still slams.Damper is faulty or not installed correctly.Verify installation steps. If the issue persists, the dampEle pode precisar ser substituído.

8. Especificações

9. Garantia e Suporte

For specific warranty information, please refer to the documentation provided with your purchase or contact Blum directly. For technical support or further assistance, please visit the official Blum website ou entre em contato com o departamento de atendimento ao cliente.

Blum Official Website: www.blum.com

Documentos relacionados - B970.1002-5

Préview Blum Hardware: Ajustes sem esforço para um design de gabinete impecável
Descubra como os inovadores sistemas de elevação, sistemas de gavetas, sistemas de dobradiças e sistemas de encaixe da Blum permitem ajustes tridimensionais sem esforço para um alinhamento perfeito dos armários e um design impecável. Conheça o aplicativo EASY ASSEMBLY para obter orientações rápidas.
Préview Sistemas de elevação Blum AVENTOS: Aprimore seus armários
Explore Blum's innovative AVENTOS lift systems for upper cabinets. Discover solutions for effortless access, smooth operation, and soft closing, designed to enhance kitchen and living spaces. Find detailed specifications and ordering information.
Préview Blum TIP-ON BLUMOTION para TANDEMBOX: Recursos, Planejamento e Pedidos: Características, Planejamento e Encomendas
Guia completo do sistema TIP-ON BLUMOTION da Blum para gavetas TANDEMBOX, detalhando recursos, especificações técnicas, informações para pedidos e requisitos de planejamento para uma operação suave e silenciosa das gavetas.
Préview Instruções de instalação e especificações do Blum TANDEM plus BLUMOTION 563F
Instruções de instalação e especificações para as corrediças ocultas de extensão total Blum TANDEM plus BLUMOTION 563F. Abrange a preparação da gaveta, montagem, ajustes e tipos de aplicação (com moldura frontal, sem moldura, embutida).
Préview Blum REVEGO Pocketsysteme: Planungs- und Bestellinformationen
Entdecken Sie REVEGO Pocketsysteme von Blum für moderne Raumkonzepte. Dieses Dokument bietet detaillierte Planungs-, Auswahl- und Bestellinformationen für Einzeltür- und Doppeltüranwendungen.
Préview Sistemas de elevação Blum AVENTOS: Guia completo do produto
Explore os inovadores sistemas de elevação AVENTOS da Blum, projetados para cozinhas e armários modernos. Descubra recursos, aplicações, planejamento e detalhes de instalação para diversos modelos, como HF, HS, HL, HK, HK-S e HK-XS, incluindo as soluções SERVO-DRIVE e TIP-ON.