Introdução
The Apogee MiC Plus is a studio-quality USB microphone designed for pristine sound capture. It features a cardioid condenser mic capsule, a built-in mic pre-amp, and a zero-latency headphone output, making it ideal for recording vocals, podcasts, and instruments on various platforms including macOS, iOS, and Windows.
Figure 1: Apogee MiC Plus with included desktop tripod.
O que está na caixa
- Apogee MiC Plus Microphone
- Lightning iOS cable
- Cabo USB-C
- Cabo USB-A
- Tripé de mesa
- Clipe de microfone
Figure 2: Contents of the Apogee MiC Plus package.
Configurar
Conectando-se ao seu dispositivo
- Escolha o cabo certo: Select the appropriate cable for your device. Use the Lightning cable for iOS devices, and either the USB-C or USB-A cable for computers (macOS or Windows).
- Connect the MiC Plus: Plug the micro-USB end of the chosen cable into the MiC Plus.
- Conectar ao dispositivo: Plug the other end of the cable into your computer or iOS device.
- Ligar: The MiC Plus is bus-powered and will power on automatically when connected. The status LED will illuminate.
Figure 3: MiC Plus connected to a laptop for recording.
Monitoramento de fone de ouvido
The MiC Plus features a powerful headphone output with a blend feature for zero-latency monitoring. This allows you to hear your input signal directly without any delay, which is crucial for accurate recording.
- Conecte fones de ouvido: Plug your headphones into the 3.5mm headphone jack on the MiC Plus.
- Adjust Blend: Use the control knob on the MiC Plus to adjust the blend between your input signal (microphone) and playback from your device. This ensures you can monitor your performance clearly.
Figure 4: Close-up of the MiC Plus ports, including the headphone jack.
Operating the MiC Plus
Ganhe controle
The MiC Plus features 46dB of mic preamp gain, digitally controlled for greater precision. This allows you to set the optimal input level for your recordings.
- Ajustando o ganho: Use the control knob on the MiC Plus to increase or decrease the microphone's input gain. Monitor the input levels in your recording software to avoid clipping (distortion).
- Função Silenciar: To mute the microphone, press the control knob in. The status LED will change to indicate mute status.
Figure 5: The control knob on the MiC Plus for gain adjustment and muting.
Recording with "First Take" Application
"First Take" is a free podcast recording application that allows you to connect up to 4 different Apogee mics to a single computer or USB Hub. It simplifies the podcast recording process.
Video 1: Introduction to First Take, demonstrating multi-mic podcast recording with Apogee microphones.
- Install First Take: Download and install the "First Take" application on your compatible computer.
- Conecte os microfones: Connect your Apogee MiC Plus (and up to three other compatible Apogee mics) to your computer or a USB hub.
- Launch First Take: Open the application. It will automatically detect connected Apogee microphones.
- Ajustar níveis: Use the individual faders within the "First Take" interface to set the recording levels for each microphone.
- Iniciar gravação: Click the "REC" button to begin your podcast recording.
- Acessar gravações: Your recordings will be saved and can be accessed directly from within the "First Take" application.
Figure 6: Multiple MiC Plus units used for a podcast recording session.
Manutenção
- Limpeza: Use a soft, dry cloth to clean the exterior of the MiC Plus. Do not use liquid cleaners or solvents.
- Armazenar: When not in use, store the MiC Plus in a protective case or bag to prevent dust and damage.
- Cuidados com os cabos: Handle cables carefully. Avoid sharp bends or kinks that can damage the internal wiring.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Sem som do microfone | Incorrect cable connection, software input not selected, microphone muted, low gain. | Ensure cables are securely connected. Check your recording software's audio input settings to confirm MiC Plus is selected. Press the control knob to unmute. Increase gain. |
| Áudio distorcido | Ganho de entrada muito alto (distorção). | Reduce the input gain using the control knob on the MiC Plus or within your recording software. |
| Sem som nos fones de ouvido | Headphones not connected, headphone volume too low, blend knob setting. | Ensure headphones are fully plugged in. Adjust headphone volume on your device or the MiC Plus. Check the blend knob to ensure you are monitoring the correct source. |
| Microfone não reconhecido pelo dispositivo | Driver issue (Windows), incompatible device, faulty cable. | Try a different USB port or cable. For Windows, ensure drivers are up to date (usually plug-and-play, but check Apogee's website if issues persist). Verify device compatibility. |
Especificações
- Nome do modelo: Apogee MiC Plus
- Marca: Apogeu
- Tipo de microfone: Condensador Cardioide
- Padrão polar: Unidirecional
- Tecnologia de conectividade: USB
- Interface de hardware: USB 2.0
- Sensibilidade de áudio: 94 dB
- A relação sinal-ruído: 46 dB
- Resposta de frequência: 20 Hz - 20 kHz
- Profundidade de bits / Sample Taxa: Até 24 bits/96 kHz
- Fonte de energia: USB Bus-Powered
- Dispositivos compatíveis: Smartphone, Tablet, macOS (OS X 10.9 or later), Windows (Windows 10)
- Peso do item: 1 libras (aproximadamente 0.45 kg)
- Dimensões do produto (C x L x A): 5.02 x 2.13 x 7.8 polegadas (aproximadamente 12.75 x 5.41 x 19.81 cm)
- Fabricante: Apogee Electronics Corp.
- Código UPC: 805676302034
Garantia e Suporte
Apogee products are known for their quality and reliability. For detailed warranty information and technical support, please refer to the official Apogee website ou a documentação incluída com o seu produto.
Você também pode encontrar recursos adicionais e perguntas frequentes em Loja Apogee na Amazon ou baixe o Guia do usuário (PDF) Para obter detalhes completos.
For customer service inquiries related to your purchase, please contact the seller, Apogee Electronics Corp., directly through Amazon's platform.