Introdução
Thank you for choosing the Project Source 2-Pack 7.4-in W White LED Flush Mount Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixtures. Please read this manual thoroughly before installation and retain it for future reference.
These LED flush mount ceiling lights are designed for both indoor and outdoor living spaces, featuring a wet-rated design. They are Energy Star rated for efficiency, provide a color temperature of 3000K, a Color Rendering Index (CRI) of 90, and an output of 730 lumens.
Informações de segurança
Always follow basic safety precautions when installing or working with electrical fixtures to reduce the risk of fire, electric shock, or personal injury.
- AVISO: Risco de choque elétrico. Desconecte a energia no fusível ou disjuntor antes de instalar ou fazer manutenção.
- AVISO: Risk of fire. Use only in circuits rated for the fixture.
- Consulte um eletricista qualificado se não tiver certeza sobre o processo de instalação.
- Não modifique o acessório de forma alguma. Quaisquer modificações podem anular a garantia e criar um risco à segurança.
- Certifique-se de que todas as conexões estejam seguras e devidamente isoladas.
- Do not install near heat sources or in areas with excessive moisture beyond its wet-rated capabilities.
- This product is designed for direct wire connection and does not use a plug.
O que está na caixa
Verifique se todos os componentes estão presentes antes de iniciar a instalação:
- 2 x Project Source 7.4-in LED Flush Mount Light Fixtures
- Hardware de montagem
- Controle remoto (Note: While the product data mentions a remote control, typical flush mount lights of this type do not include one. Please verify your specific package contents.)
Configuração (Instalação)
Installation should be performed by a qualified individual. Always ensure power is disconnected at the circuit breaker before starting.
- Desligar a energia: Locate the circuit breaker controlling the light fixture's location and turn it off. Verify power is off using a voltage testador.
- Preparar a superfície de montagem: Ensure the electrical box is securely mounted and capable of supporting the fixture's weight.
- Fios de conexão: Connect the fixture's wires to the corresponding house wires using wire nuts (typically black to black, white to white, and ground to ground). Ensure all connections are tight and secure.
- Montagem do dispositivo: Carefully align the fixture with the mounting holes on the electrical box and secure it using the provided mounting hardware.
- Restaurar energia: Após a instalação segura da luminária, restabeleça a energia no disjuntor.
Image: Two Project Source 7.4-inch white LED flush mount ceiling lights, showcasing their compact and low-profile design suitable for various indoor and outdoor applications.
Instruções de operação
The Project Source LED Flush Mount Light operates like a standard ceiling light fixture. Once properly installed and power is restored, it can be controlled via a standard wall switch.
- Ligar/Desligar: Acione o interruptor de parede conectado à luminária para ligar ou desligar a luz.
- Eficiência Energética: As an Energy Star rated LED fixture, it consumes significantly less energy than traditional incandescent bulbs, providing long-term savings.
Manutenção
These LED fixtures require minimal maintenance due to their long lifespan. However, occasional cleaning is recommended to maintain optimal light output and appearance.
- Limpeza: Certifique-se de que a energia esteja desligada antes de limpar. Use um pano macio, seco ou levemente úmido.amp cloth to wipe the surface of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- Longevidade do LED: The integrated LED light source is designed for long-term use and is not user-replaceable. If the LED fails, the entire fixture typically requires replacement.
Solução de problemas
Se você tiver problemas com sua luminária, consulte os problemas e soluções comuns a seguir:
| Problema | Possível causa | Solução |
|---|---|---|
| A luz não acende. | Sem energia na luminária; fiação solta; interruptor com defeito. | Verifique o disjuntor. Certifique-se de que todas as conexões dos fios estejam seguras. Teste o interruptor de parede. |
| A luz pisca. | Loose wiring; incompatible dimmer switch (if applicable); power fluctuations. | Verify wire connections. Ensure the fixture is not connected to an incompatible dimmer. Consult an electrician for power issues. |
| A emissão de luz é fraca ou inconsistente. | Dust accumulation on diffuser; aging LED components. | Clean the diffuser. If the issue persists and the fixture is old, it may be reaching the end of its lifespan. |
| Fixture makes humming noise. | Loose mounting; electrical interference. | Ensure fixture is securely mounted. Consult an electrician if noise persists. |
Especificações
- Número do modelo: CLL56-2WW
- Dimensões do produto: 7.4 x 7.4 x 1.4 polegadas
- Peso: 2.15 Pounds (per pack, total for 2 lights)
- Marca: Fonte do Projeto
- Cor: Branco
- Formulário de luminária: Luminária de teto (montagem embutida)
- Uso interno/externo: Indoor/Outdoor (Wet Rated)
- Fonte de energia: Corded Electric (Direct Wire)
- Saída de luz: 730 Lúmens
- Temperatura de cor: 3000 mil
- Índice de reprodução de cor (IRC): 90
- Classificação energética: Estrela de energia
Garantia e Suporte
Project Source products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please contact Project Source customer service. Keep your purchase receipt as proof of purchase.
For assistance, please refer to the contact information provided on the product packaging or the official Project Source website.
