DIRECTV RC73, 4336303112

Manual do usuário do controle remoto DIRECTV RC73 IR/RF

Model: RC73, 4336303112

Produto acimaview

The DIRECTV RC73 IR/RF Remote Control is designed for seamless control of your DIRECTV Genie system and other compatible devices. It features both Infrared (IR) and Radio Frequency (RF) technologies, allowing for flexible operation without needing to point the remote directly at the receiver when in RF mode. This remote offers a streamlined layout with essential buttons for navigating your entertainment.

Two DIRECTV RC73 remote controls side-by-side.

Image: Two DIRECTV RC73 remote controls, showcasing their black and white design and button layout.

Configurar

1. Instalação da bateria

Your DIRECTV RC73 remote control requires two AA batteries for operation. These batteries are typically included with your purchase.

  1. Localize a tampa do compartimento da bateria na parte traseira do controle remoto.
  2. Slide the cover downwards or press the release tab (if present) and lift the cover off.
  3. Insira duas pilhas AA, certificando-se de que os terminais positivo (+) e negativo (-) estejam alinhados corretamente com os indicadores dentro do compartimento.
  4. Recoloque a tampa do compartimento da bateria, deslizando-a de volta para o lugar até ouvir um clique.
Two DIRECTV RC73 remotes with included AA batteries and a Genie Remote Guide.

Image: Two DIRECTV RC73 remote controls shown with two AA batteries and a small instruction guide, illustrating the contents of the package.

2. Pairing the Remote to Your DIRECTV Genie Receiver (RF Mode)

To enable RF (Radio Frequency) control, allowing you to operate your receiver without direct line-of-sight, follow these steps:

  1. Aponte o controle remoto para o seu receptor DIRECTV.
  2. Pressione e segure simultaneamente o MUDO botão e o SELECIONAR Pressione o botão no controle remoto por aproximadamente 5 segundos.
  3. Release the buttons when the green light on the remote blinks twice.
  4. Using the number pad on the remote, enter the code 961.
  5. Pressione o CANAL PARA CIMA botão uma vez.
  6. Pressione o DIGITAR button (located below the number pad).
  7. Observe your TV screen. A message should appear indicating "Applying RF/IR Setup. Please Wait..." followed by "Your Remote is now setup for RF."
  8. Pressione o SELECIONAR (OK) button on the remote to confirm.

3. Programming the Remote to Your TV (Volume Control)

To control your TV's volume and power with the RC73 remote, you need to program it to your television. This process typically involves selecting your TV's brand from the receiver's menu.

  1. Pressione o MENU button on your DIRECTV remote.
  2. Navigate down using the CANAL ABAIXO button to find and select Configurações.
  3. Once in Settings, use the directional arrows to navigate to the right until you find and select Controle remoto.
  4. From the Remote Control Setup menu, select Par / Programa Remoto.
  5. Escolher Program Audio Device.
  6. You will be prompted to select your TV's brand. Use the keypad or navigate through the list to find your brand (e.g., Samsung). If you don't know the specific model, select "I don't know my model" if available.
  7. Follow the on-screen prompts to test the code. This usually involves pressing the PODER button on the remote to see if your TV turns off.
  8. If the TV turns off, select "It Worked" to confirm the programming. If not, select "Try Next Code" and repeat the test until a working code is found.

Instruções de operação

The DIRECTV RC73 remote control features a user-friendly layout for intuitive navigation and control of your DIRECTV system and connected devices.

Detailed diagram of the DIRECTV RC73 remote control with labels for each button's function.

Image: A detailed diagram of the RC73 remote, illustrating the function of each button for comprehensive control.

Funções do botão-chave
BotãoFunção
ON/OFF (RC73)Turns both DIRECTV Receiver and TV ON or OFF at the same time. (Remote must be programmed for TV; HD DVR still records when off.)
GUIAPress once for On-Screen Guide. Press twice for programming grouped into categories.
MENUAccesses the main menu for settings, recordings, and more.
LISTADisplays the LIST of your recorded programs.
SAIRExits the current menu and returns to the previous channel viewed.
SELECIONARSelects the item highlighted on screen.
INFORMAÇÕESDisplays INFORMATION about the program now playing or highlighted in the On-Screen Guide.
VOL (Volume)Adjusts the volume of your TV or audio device (if programmed).
CH (canal)Muda o canal para cima ou para baixo.
ANTERIORReturns to the PREVIOUS channel viewed.
RECORD (Red Circle)Records the program now playing or highlighted in the On-Screen Guide. Press twice to record the entire series.
MUDOSilencia o som.
REPETIRReplays the previous six seconds.
REBOBINARRewinds at increasing speeds—press up to four times.
REPRODUZIR/PAUSARPlays the current program. Press once while the program is playing to PAUSE.
DASH (-)Press for Guide Options while viewing On-Screen Guide. Press for playlist options while viewing playlist. Press to display last 6 digits of receiver ID, satellite signal type (SWiM or Multiswitch) and Internet status.
ADVANCEAdvances 30 seconds. Press and hold to jump ahead to the end of a recorded program.
AVANÇO RÁPIDOFast-forwards at increasing speeds—press up to four times.
ENTER (Input)Press for Mini Guide while viewing your program and dismiss with EXIT. ENTER also replaces TV INPUT button: to cycle through the equipment connected to your TV, press and hold for three seconds until LED light at top turns green. Then scroll through inputs by pressing ENTER again.

Manutenção

Substituição da bateria

When the remote's performance degrades or the green light no longer blinks during operation, it's time to replace the batteries. Always use two new AA batteries for optimal performance.

  1. Remove the battery compartment cover as described in the Setup section.
  2. Remova as pilhas velhas.
  3. Insert two new AA batteries, observing the correct polarity (+/-).
  4. Recoloque a tampa do compartimento da bateria.

Limpeza

To maintain the remote's appearance and functionality, periodically wipe it with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the remote's surface or internal components.

Solução de problemas

Problemas e soluções comuns
EmitirPossível causaSolução
O controle remoto não responde ao receptor.Low or dead batteries; Remote not paired in RF mode; Obstruction between remote and receiver (if in IR mode).Replace batteries. Ensure remote is paired in RF mode (refer to Setup section). Remove any obstructions.
Volume or TV power buttons not working.Remote not programmed to TV.Program the remote to your TV (refer to Setup section, "Programming the Remote to Your TV").
Green light on remote blinks slowly or not at all.Bateria fraca.Substitua as baterias imediatamente.
Remote controls receiver but not client device (e.g., Genie Mini).Client device not properly paired or connected.Ensure the client device is correctly connected and powered on. Re-pair the remote with the client device if necessary (consult your Genie Mini's specific instructions).

Especificações

Garantia e Suporte

For specific warranty information regarding your DIRECTV RC73 remote control, please refer to the documentation included with your original purchase or visit the official DIRECTV webOs termos e condições da garantia podem variar.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact DIRECTV customer service directly. Contact information can typically be found on your DIRECTV bill, their official website, or through your service provider.

Recursos on-line:

Documentos relacionados - RC73, 4336303112

Préview Guia do DIRECTV Genie e do Controle Remoto Universal
Um guia completo para entender as funções dos controles remotos DIRECTV Genie e Universal, incluindo explicações detalhadas dos botões e instruções de programação para diversos receptores e TVs da DIRECTV.
Préview Guia do Controle Remoto Universal da DIRECTV: Primeiros Passos e Programação
Aprenda a usar seu controle remoto universal da DIRECTV, entenda as funções dos botões e programe seu controle remoto RC73 para contas comerciais. Inclui instruções de configuração e recursos.
Préview Guia de configuração e ativação do DIRECTV Wireless Genie Mini
Instruções passo a passo para conectar, configurar, ativar e programar seu novo DIRECTV Wireless Genie Mini para entretenimento de vídeo perfeito.
Préview Instruções de ativação do servidor DIRECTV Genie 2 e devolução do equipamento
Guia passo a passo para ativar seu servidor DIRECTV Genie 2 de substituição e devolver seu equipamento antigo para evitar taxas de não devolução. Inclui procedimentos de configuração, pareamento e devolução.
Préview Manual do Produto DIRECTV Genie 2 - Recursos, Especificações e Informações de Segurança
Manual completo do produto para o receptor de satélite DIRECTV Genie 2, abrangendo detalhes de hardware, recursos, solução de problemas, indicadores LED, precauções de segurança e informações sobre a garantia. Inclui orientações de configuração e operação.
Préview Guia de Instalação do DIRECTV Wireless Genie Mini C41W
Guia passo a passo para instalar e conectar o DIRECTV Wireless Genie Mini (Modelo C41W) ao seu DVR Genie HD para uma experiência de entretenimento doméstico aprimorada.