Introdução
This manual provides essential instructions for the setup, operation, and maintenance of your Amazon Basics Small Slim Desk Drawer Security Safe. Please read this manual thoroughly before using the safe to ensure proper function and security. Keep this manual for future reference.
Informações importantes de segurança
- Do not store the emergency override keys inside the safe. Keep them in a secure, separate location.
- Ensure the safe is mounted securely to prevent unauthorized removal.
- This safe is designed for security against theft and unauthorized access. It is not fireproof or waterproof. For fire or water protection, consider additional protective measures.
- Keep the keypad dry and clean. Avoid using abrasive cleaners.
Conteúdo da embalagem
- Amazon Basics DS-110SAM Security Safe
- Emergency Override Keys (2)
- Acessórios de montagem (parafusos, buchas)
- Manual de Instruções (este documento)
Configurar
1. Instalação da bateria
- Open the safe using one of the emergency override keys. Insert the key into the keyhole located behind the keypad cover, turn it clockwise, and rotate the knob to open the door.
- Localize o compartimento da bateria na parte interna da porta do cofre.
- Insira 4 pilhas AA novas, certificando-se da polaridade correta (+/-).
- Feche a tampa do compartimento da bateria.
2. Definindo seu código pessoal
Your safe comes with a factory default code (usually 1-5-9). It is highly recommended to change this immediately.
- With the safe door open, press the red reset button located on the inside of the door, near the hinges. You will hear a beep.
- On the keypad, enter your new personal code (3 to 8 digits).
- Pressione e segurar the '#' button to confirm. You will hear a confirmation beep.
- Test your new code with the door open before closing it. Enter your code, then press '#'. The green light should illuminate, allowing you to turn the knob and retract the bolts.
3. Montagem do Cofre
For enhanced security, the safe can be mounted to a drawer or other flat surface using the pre-drilled holes and included hardware.
Image: Back of the safe with pre-drilled mounting holes.
- Choose a suitable location, such as inside a desk drawer, where the safe can be securely fastened.
- Mark the positions for the mounting holes on the chosen surface using the safe's pre-drilled holes as a template.
- Drill pilot holes into the surface.
- Align the safe with the pilot holes and secure it using the provided screws and anchors. Ensure the safe is firmly attached.
Image: The safe positioned within a desk drawer, demonstrating its intended use.
Operating the Safe
Imagem: Frente view of the safe, highlighting the electronic keypad and locking mechanism.
1. Abertura com teclado eletrônico
- Enter your personal code (3 to 8 digits).
- Press the '#' button. The green light will illuminate.
- Em até 5 segundos, gire o botão no sentido horário para abrir a porta do cofre.
2. Opening with Emergency Override Key
Use this method if you forget your code or if the batteries are depleted.
Image: Close-up of the keypad with an emergency key in use.
- Gently remove the keypad cover to reveal the keyhole.
- Insira uma das chaves de emergência na fechadura.
- Turn the key clockwise and simultaneously turn the knob to open the safe door.
- Uma vez aberto, você pode substituir as baterias, se necessário, ou redefinir seu código.
3. Fechando e trancando o cofre
- Feche a porta do cofre.
- Turn the knob counter-clockwise to engage the locking bolts. The safe is now locked.
Image: Detail of the live-door bolts, which provide security when the safe is locked.
Manutenção
1. Substituição da bateria
When the batteries are low, the red light on the keypad may flash or the safe may not respond. Replace all 4 AA batteries promptly to ensure continuous operation. Follow the battery installation steps in the Setup section.
2. Limpeza
Limpe a parte externa do cofre com um pano macio e seco.amp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or electronic components.
Solução de problemas
- O cofre não abre com o código:
- Certifique-se de que as pilhas estejam novas e instaladas corretamente.
- Verify you are entering the correct code and pressing '#' firmly.
- Try using the emergency override key.
- O teclado não responde:
- Substitua as pilhas.
- Certifique-se de que nenhum detrito esteja obstruindo os botões.
- A porta não fecha corretamente:
- Verifique se há alguma obstrução dentro do cofre ou ao redor da moldura da porta.
- Ensure the locking bolts are fully retracted before attempting to close.
Especificações
| Marca | Noções básicas sobre a Amazon |
| Número do modelo | DS-110SAM |
| Dimensões do produto (externas) | 11.8"W x 8.6"D x 4.4"H (30cm x 21.9cm x 11.2cm) |
| Dimensões interiores | 11.7"W x 8.5"D x 1.7"H (29.7cm x 21.6cm x 4.3cm) |
| Capacidade | 0.1 pés cúbicos (2.7 litros) |
| Tipo de bloqueio | Electronic Keypad with Emergency Key |
| Material | Liga de aço |
| Cor | Preto |
| Peso do item | 11.27 libras (5.12 kg) |
| Pilhas necessárias | 4 x pilhas AA (não incluídas) |
Informações de garantia
For information regarding the warranty for your Amazon Basics product, please refer to the documentation included with your purchase or visit the official Amazon Basics webOs termos e condições da garantia podem variar.
Suporte ao cliente
If you have any questions, require assistance, or need to report an issue with your Amazon Basics safe, please contact Amazon customer support through their official website ou as informações de contato fornecidas com sua compra.
