1. Introdução
The Superior Electronics Simply SUPTLB001 is a universal remote control designed for ease of use and simplicity. It features a self-learning function, allowing it to acquire commands directly from your original remote controls. This remote is capable of controlling up to two different devices, such as a television and a set-top box, making it an ideal solution for consolidating your remote controls. Its design prioritizes large, clearly identifiable buttons for comfortable operation.
2. Recursos do Produto
- Compatibilidade Universal: Controls a wide range of devices.
- Self-Learning Function: Easily acquires commands from existing remote controls.
- Two-Device Control: Manages up to two separate electronic devices.
- Botões grandes: Designed with oversized, clearly marked buttons for enhanced usability.
- Design intuitivo: Simple layout for straightforward operation.
- Quick Programming: Learning process typically takes less than one minute per button.
3. Configuração
3.1. Instalação da bateria
The Superior Electronics Simply SUPTLB001 remote control requires two (2) AAA batteries (not included) for operation.
- Localize a tampa do compartimento da bateria na parte traseira do controle remoto.
- Deslize a tampa para baixo ou pressione a trava e levante para abrir.
- Insira duas pilhas AAA, certificando-se de que os terminais positivo (+) e negativo (-) estejam alinhados corretamente com as marcações dentro do compartimento.
- Recoloque a tampa do compartimento da bateria, deslizando-a de volta para o lugar até ouvir um clique.
Image: Back of the remote control, indicating the battery compartment.
3.2. Learning Function Programming
The Simply SUPTLB001 remote learns functions directly from your original remote controls. You can program any button on the Simply remote to perform a function from your original remote.
- Preparar controles remotos: Place the Simply SUPTLB001 remote and your original remote control on a flat surface, facing each other, with their infrared (IR) emitters aligned and approximately 1-3 cm apart.
- Entre no modo de aprendizagem: Pressione e segure o PODER button on the Simply remote for approximately 5 seconds until the red indicator light (usually near the power button) illuminates steadily. This indicates the remote is in learning mode.
- Select Device (A or B): If you are programming for Device A, press the A button. If for Device B, press the B button. The indicator light may flash to confirm selection.
- Selecione o botão para aprender: Press the button on the Simply remote that you wish to program (e.g., V+ for Volume Up). The indicator light will start flashing slowly, waiting for a signal.
- Sinal de transmissão: Press and hold the corresponding button on your original remote control (e.g., Volume Up) until the indicator light on the Simply remote flashes rapidly three times and then remains steady. This signifies successful learning.
- Repita o procedimento para os outros botões: Repeat steps 4 and 5 for all other buttons you wish to program for the current device.
- Sair do Modo de Aprendizagem: Once all desired buttons are programmed, press the PODER button on the Simply remote again to exit learning mode. The indicator light will turn off.
Observação: If the indicator light flashes rapidly and then turns off without remaining steady, the learning process for that button may have failed. Ensure the remotes are properly aligned and try again. Some original remotes may require a longer press to transmit the signal effectively.
Imagem: Frente view of the Simply SUPTLB001 remote control.
4. Instruções de operação
After successful programming, you can use your Simply SUPTLB001 remote control to operate your devices.
- Seleção do dispositivo: Pressione o A button to control the first programmed device or the B button to control the second programmed device. The indicator light may briefly flash to confirm the selected device.
- Ligar/desligar: Pressione o PODER Botão para ligar ou desligar o dispositivo selecionado.
- Controle de volume: Use o V+ button to increase volume and V- para diminuir o volume.
- Program/Channel Control: Use o P+ button to go to the next program/channel and P- to go to the previous program/channel.
- Entrada AV: Pressione o AV button to switch between video input sources on your television.
The functionality of each button depends on how it was programmed during the learning process.
5. Manutenção
- Limpeza: To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface.
- Substituição da bateria: Replace batteries when the remote's performance degrades or the indicator light does not respond as expected. Always replace both AAA batteries at the same time with new ones.
- Armazenar: Guarde o controle remoto em local seco, longe da luz solar direta e de temperaturas extremas.
6. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Remoto não funciona. | As pilhas estão descarregadas ou inseridas incorretamente. | Substitua as pilhas por pilhas AAA novas, certificando-se da polaridade correta. |
| Learning function fails (indicator light flashes rapidly and turns off). | Remotes not aligned, too far apart, or original remote signal is weak. | Ensure remotes are 1-3 cm apart and IR emitters are aligned. Press and hold the original remote button firmly. Try again. |
| Programmed button does not control the device. | Button was not programmed correctly or device selection is wrong. | Re-program the button following the learning instructions. Ensure you have selected the correct device (A or B) before attempting to control it. |
| O alcance do controle remoto é ruim. | Low batteries or obstruction between remote and device. | Replace batteries. Ensure a clear line of sight between the remote and the device's IR receiver. |
7. Especificações
| Marca | Superior Electronics |
| Nome do modelo | Simplesmente |
| Número do modelo | SUPTLB001 |
| Cor | Preto |
| Tecnologia de Conectividade | Infrared (IR) Learning Function |
| Dispositivos compatíveis | Television, other IR-controlled devices |
| Maximum Devices Supported | 2 |
| Número de botões | 10 (Power, A, B, AV, V+, V-, P+, P-) |
| Tipo de Bateria | 2 x AAA (not rechargeable) |
| Alcance máximo | 10 metros (aproximadamente 33 pés) |
| Dimensões (aprox.) | 16.5 cm (comprimento) x 4.5 cm (largura) |
Imagem: Lado view of the remote control with approximate dimensions.
8. Garantia e Suporte
This Superior Electronics Simply SUPTLB001 remote control comes with a manufacturer's warranty of 2 anos a partir da data da compra.
For warranty claims, technical assistance, or further support, please refer to the contact information provided with your purchase documentation or visit the official Superior Electronics webPor favor, guarde seu comprovante de compra para validação da garantia.
