Produto acimaview
The TRUE GDM-19T-LD Glass Door Merchandiser is a commercial refrigeration unit designed for displaying and storing various products. It features a single swing glass door, LED interior lighting, and adjustable wire shelves. This unit is engineered for energy efficiency and reliable temperature maintenance, typically maintaining temperatures between +33°F and +38°F.
Frente view of the TRUE GDM-19T-LD Glass Door Merchandiser, showcasing its single glass door and internal shelving.
Configuração e instalação
Proper setup is crucial for optimal performance and longevity of your merchandiser. Follow these steps carefully:
- Desembalagem: Carefully remove all packaging materials. Inspect the unit for any shipping damage. Report any damage immediately to your carrier.
- Localização: Place the merchandiser on a level, sturdy surface capable of supporting its weight when fully loaded. Ensure adequate ventilation around the unit. Avoid direct sunlight or heat sources.
- Liberação: Maintain a minimum of 3 inches (7.6 cm) clearance from walls or other obstructions on the sides and rear for proper airflow.
- Conexão elétrica: Connect the unit to a dedicated grounded electrical outlet. Refer to the specifications section for electrical requirements. Do not use extension cords.
- Limpeza Inicial: Before first use, clean the interior and exterior surfaces with a mild soap and water solution. Rinse thoroughly and dry.
- Nivelamento: Use a level to ensure the unit is perfectly level. Adjust the leveling feet as needed.
- Shelving Installation: Install the adjustable wire shelves as desired. Ensure they are securely seated on the shelf clips.
Interior view of the merchandiser, showing the adjustable wire shelves and LED lighting.
Instruções de operação
Once installed, operating your TRUE merchandiser is straightforward:
- Ligar: Plug the unit into the electrical outlet. The internal lighting and refrigeration system will activate.
- Controle de temperatura: The unit is designed to maintain a temperature between +33°F and +38°F (0.5°C and 3.3°C). The temperature control is typically located inside the unit or on the front panel. Adjust as necessary within the recommended range.
- Carregando produtos: Load products evenly on the shelves. Do not block the air vents inside the unit, as this can impede airflow and affect cooling efficiency.
- Operação da porta: Ensure the glass door closes completely after each opening to maintain internal temperature and energy efficiency. The door features a self-closing mechanism.
- Ciclo de degelo: This unit features an automatic defrost system. During defrost, the evaporator coil is warmed to melt any accumulated ice. Water drains into an evaporator pan and is evaporated.
Manutenção
Regular maintenance ensures efficient operation and extends the life of your merchandiser.
Manutenção diária:
- Wipe down the exterior and interior surfaces with a clean cloth and mild, non-abrasive cleaner.
- Check that the door gasket is clean and sealing properly.
Manutenção mensal:
- Limpeza da serpentina do condensador: The condenser coil should be cleaned monthly or more frequently in dusty environments. Unplug the unit before cleaning. Use a stiff brush or vacuum cleaner to remove dust and debris from the coil. A dirty coil reduces efficiency and can lead to compressor failure.
- Inspecione o cabo de alimentação para ver se há danos.
Manutenção anual:
- It is recommended to have a qualified refrigeration technician inspect the unit annually for optimal performance.
Guia de solução de problemas
Antes de solicitar assistência técnica, verifique os seguintes problemas comuns:
| Problema | Possível causa | Solução |
|---|---|---|
| Unidade não refrigerando |
|
|
| Ruído excessivo |
|
|
| Água no chão |
|
|
Especificações
| Recurso | Detalhe |
|---|---|
| Marca | verdadeiro |
| Modelo | GDM-19T-HC~TSL01 |
| Capacidade | 19 pés cúbicos |
| Tipo de instalação | Freestanding |
| Número de portas | 1 (Vidro) |
| Sistema de degelo | Automático |
| Tipo de prateleira | Wire (4 adjustable shelves) |
| Faixa de temperatura | + 33 ° F a + 38 ° F (0.5 ° C a 3.3 ° C) |
| Acabamento Exterior | Non-chip, non-peel vinyl (Black or White) or Stainless Steel |
| Acabamento interior | NSF approved white anodized aluminum |
| Iluminação | Standard LED interior lighting |
Garantia e Suporte
For warranty information and technical support, please refer to the official TRUE Manufacturing website or contact their customer service department. Keep your purchase receipt and model number readily available when contacting support.
Planos de proteção estão disponíveis para cobertura estendida:
- Plano de proteção de 2 anos: $159.99
- Plano de proteção de 3 anos: $239.99
- Proteção Completa (mensal): US$ 16.99/mês
Para obter mais assistência, você pode visitar o Loja TRUE na Amazon.