1. Terminadoview
This manual provides instructions for the Feit Electric A19 LED Light Bulbs, model A800/830/10KLED/10/RP. These bulbs are designed to offer energy-efficient lighting for various residential and commercial applications. They provide 800 lumens of 2700K Soft White light, equivalent to a standard 60-watt incandescent bulb, while consuming only 10 watts of power.
Principais características:
- Economia de energia: Replaces 60W incandescent bulbs with 10W LED, offering up to 83% energy savings.
- Duradouro: Designed for an average life of 11,000 hours (approximately 10 years), reducing the frequency of bulb replacements.
- Luz branca suave: Produces a 2700K color temperature, ideal for creating a warm and inviting atmosphere.
- Ligação instantânea: Provides full brightness immediately upon activation, with no warm-up time.
- Qualidade e Segurança: UL listed and FCC compliant, ensuring high standards for performance and safety.
Figure 1: Feit Electric A19 LED Light Bulbs (10-pack packaging).
2. Informações de segurança
Leia e compreenda todas as instruções de segurança antes de instalar ou usar estas lâmpadas LED. O não cumprimento destas instruções pode resultar em choque elétrico, incêndio ou outros riscos.
- Risco de choque elétrico: Desligue sempre a energia da luminária antes de inspecionar, instalar ou remover a lâmpada.
- Não regulável: Essas lâmpadas são NÃO designed for use with dimmers. Using them with a dimmer switch may cause flickering, damage to the bulb, or premature failure.
- Adequado para Damp Localizações: These bulbs are suitable for use in damp locations, but not for direct exposure to water.
- Temperatura de operação: Do not use in totally enclosed luminaires unless the fixture is specifically designed for LED bulbs. Excessive heat can shorten bulb life.
- Livre de mercúrio: These bulbs are 100% mercury-free.
- Listado pela UL: This product is UL listed, indicating compliance with safety standards.
3. Configuração e instalação
Installation of the Feit Electric A19 LED Light Bulb is straightforward. Ensure the power is off before proceeding.
- Desligar a energia: Localize o interruptor ou disjuntor que controla a luminária e desligue a energia.
- Remova a lâmpada antiga: Desenrosque cuidadosamente a lâmpada existente do soquete. Deixe-a esfriar caso tenha sido usada recentemente.
- Instalar nova lâmpada: Screw the Feit Electric A19 LED bulb into the standard E26 medium base socket. Turn clockwise until it is finger-tight. Do not overtighten.
- Restaurar energia: Ligue novamente a energia no interruptor ou disjuntor.
- Teste: Ligue o interruptor para garantir que a lâmpada esteja funcionando corretamente.
Figure 2: A19 LED Bulb dimensions and base type (E26 Medium).
4. Operação
The Feit Electric A19 LED Light Bulb operates like a standard light bulb. Once installed and power is restored, simply use the wall switch or fixture switch to turn the light on or off.
- Brilho instantâneo: The bulb will illuminate to full brightness immediately without any delay.
- Saída de luz: Provides 800 lumens of light, suitable for general room illumination.
- Temperatura de cor: Emits a 2700K Soft White light, creating a warm and comfortable ambiance.
- Não regulável: This bulb is not compatible with dimmer switches. Ensure it is used in a non-dimmable circuit.
Figure 3: Illustration of the bulb's light output in a room setting.
5. Manutenção
Feit Electric A19 LED Light Bulbs require minimal maintenance due to their long lifespan and durable design.
- Limpeza: Para limpar a lâmpada, certifique-se de que a energia esteja desligada e que a lâmpada esteja fria. Limpe delicadamente com um pano macio e seco. Não use produtos de limpeza líquidos ou materiais abrasivos.
- Nenhuma peça que possa ser reparada pelo usuário: The bulb contains no user-serviceable parts. Do not attempt to open or repair the bulb.
- Disposição: Dispose of old bulbs according to local regulations for electronic waste.
6. Solução De Problemas
If you encounter issues with your Feit Electric A19 LED Light Bulb, refer to the following common problems and solutions:
| Problema | Possível causa | Solução |
|---|---|---|
| A lâmpada não acende. | Sem energia na luminária, conexão solta ou lâmpada defeituosa. | Check if the light switch is on. Ensure the bulb is securely screwed into the socket. Check the circuit breaker. If issues persist, replace the bulb. |
| A lâmpada pisca. | Incompatible dimmer switch or unstable power supply. | Ensure the bulb is not connected to a dimmer switch, as it is non-dimmable. Check for loose wiring in the fixture. |
| A lâmpada está muito fraca. | Lâmpada incorreta para a luminosidade desejada. | Verify the bulb's lumen output (800 lumens for this model) meets your lighting needs. |
Figure 4: Feit Electric LED bulbs are designed for flicker-free operation in compatible fixtures.
7. Especificações
Detailed technical specifications for the Feit Electric A19 LED Light Bulb (Model: A800/830/10KLED/10/RP):
| Especificação | Valor |
|---|---|
| Número do modelo | A800/830/10KLED/10/RP |
| Tamanho do formato do bulbo | A19 |
| Base de lâmpada | E26 Médio |
| Tipo de luz | LIDERADO |
| O quetage | 10 Watts |
| Equivalente incandescente | 60 Watts |
| Brilho | 800 Lúmens |
| Cor clara | 2700K Branco Suave |
| Índice de reprodução de cor (CRI) | 80 |
| Volumetage | 110-120 Volts |
| Vida média | 11,000 Horas / 10 Anos |
| Características especiais | Non Dimmable, Mercury Free, Instant On, UL Listed, FCC Compliant |
| Uso interno/externo | Indoor, Outdoor (Suitable for Damp Locais) |
| Material | Plástico |
| Dimensões do produto | 2.35"L x 4.4"A |
Figure 5: Feit Electric A19 LED Light Bulb.
8. Garantia e Suporte
Informações sobre garantia:
This product is covered by the warranty as labelled on the product packaging. Please refer to the packaging for specific warranty terms and conditions.
Suporte ao cliente:
For 24/7 customer support, frequently asked questions, and additional resources, please visit the Feit Electric help center:
Visit Feit Electric Help Center
Figure 6: Feit Electric customer support information.
