Troy Lighting F6166 Juniper Chandelier User Manual

1. Introdução

This manual provides essential instructions for the safe installation, operation, and maintenance of your Troy Lighting F6166 Juniper 6-Light Chandelier. Please read this manual thoroughly before beginning installation and retain it for future reference.

The Juniper Chandelier features a hand-worked iron frame with a Gold Leaf finish and six off-white hardback linen shades, designed for indoor use.

2. Informações de segurança

• AVISO: Risco de choque elétrico. Desligue a energia na caixa de fusíveis ou disjuntor antes da instalação ou manutenção.
• Todas as conexões elétricas devem estar em conformidade com as normas e regulamentos locais ou com o Código Elétrico Nacional (NEC). Consulte um eletricista qualificado se não estiver familiarizado com as conexões elétricas adequadas.
• Este acessório foi projetado para indoor, dry locations only. Do not install in damp ou ambientes úmidos.
• Ensure the mounting surface can support the weight of the fixture (approximately 11 pounds).
• Use apenas o tipo de lâmpada e a água especificadostage: 6 x 40-watt maximum E12 Candelabra Base Incandescent bulbs. Do not exceed maximum wattage.
• Always allow the fixture to cool before replacing bulbs.
• Não ligue este dispositivo a um sistema elétrico sem aterramento.
• Please check your local laws and building codes regarding lighting fixture installation.

3. Conteúdo da embalagem

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not attempt to install the fixture. Contact customer support.

• Juniper 6-Light Chandelier (Fixture body with shades)
• Mounting Canopy (7" diameter x 0.75" thick)
• 72 inches of Chain
• Mounting Hardware (e.g., screws, wire nuts, crossbar)
• Manual de instruções

Observação: Light bulbs are não incluso e deve ser adquirido separadamente.

4. Configuração e instalação

Professional installation by a qualified electrician is recommended.

1. Desligue a alimentação: Localize o disjuntor ou a caixa de fusíveis e desligue a energia da caixa de junção onde a luminária será instalada.
2. Prepare mounting: Secure the mounting crossbar to the junction box using the provided screws. Ensure the crossbar is firmly attached.
3. Adjust chain length: Determine the desired hanging height for your chandelier. Use pliers to open and remove excess chain links if necessary. Thread the electrical wires through the chain and the canopy.
4. Conexões de fio:
   • Conecte o acessório preto fio para o circuito de alimentação preto (or live) wire.
   • Conecte o acessório branco fio para o circuito de alimentação branco (or neutral) wire.
   • Conecte o acessório chão fio (cobre nu ou verde) para o circuito de alimentação chão wire and to the mounting crossbar's ground screw.
   • Secure all connections with approved wire nuts and wrap with electrical tape for added safety.
5. Attach canopy: Carefully push the canopy up to the ceiling, covering the junction box and wiring. Secure it to the mounting crossbar using the provided screws or nuts.
6. Instalar lâmpadas: Screw six (6) E12 Candelabra Base Incandescent bulbs (maximum 40 watts each) into the sockets. Do not overtighten.
7. Restaure a energia: Ligue a energia novamente no disjuntor ou na caixa de fusíveis.
8. Test fixture: Turn on the light switch to ensure the chandelier is functioning correctly.

Figure 1: Troy Lighting F6166 Juniper Chandelier. This image displays the chandelier's gold leaf finished frame, six arms, and six off-white cylindrical linen shades, suspended by a chain.

5. Instruções de operação

The Troy Lighting F6166 Juniper Chandelier operates via a standard wall switch connected to its electrical circuit. There are no additional controls on the fixture itself.

• To turn the chandelier ON, flip the connected wall switch to the 'ON' position.
• To turn the chandelier DESLIGADO, flip the connected wall switch to the 'OFF' position.
• If connected to a dimmer switch (purchased separately), adjust the dimmer to control the light intensity. Ensure any dimmer switch used is compatible with incandescent bulbs.

6. Manutenção

Regular maintenance ensures the longevity and appearance of your chandelier.

• Limpeza:
  • Sempre desconecte a energia antes de limpar.
  • For the metal frame, wipe with a soft, dry cloth. Do not use abrasive cleaners, polishes, or solvents as they may damage the finish.
  • For the linen shades, gently dust with a soft brush or a lint roller. Spot clean with a slightly damp Se necessário, use um pano, mas evite encharcar o tecido.
• Substituição de lâmpada:
  • Turn off power to the fixture and allow bulbs to cool completely.
  • Desaperte cuidadosamente a lâmpada antiga do seu encaixe.
  • Screw in a new E12 Candelabra Base Incandescent bulb (maximum 40 watts). Do not exceed the recommended wattage.
  • Restaure a energia e teste a lâmpada nova.

7. Solução De Problemas

If you experience issues not listed here or if troubleshooting steps do not resolve the problem, please contact a qualified electrician or Troy Lighting customer support.

8. Especificações

9. Informações de garantia

This Troy Lighting fixture is covered by a Garantia do fabricante de 1 ano from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.

For warranty claims or further details, please contact Troy Lighting customer support.

10. Suporte ao cliente

For technical assistance, missing parts, or warranty inquiries, please contact Troy Lighting customer support through their official website ou o varejista onde o produto foi comprado.

Recursos on-line: You may find additional support and product information by visiting the official Troy Lighting website.