Manual do Usuário da Máquina de Jato de CO2 MOKA SFX LED H-C08

1. Introdução

Thank you for choosing the MOKA SFX LED CO2 Jet Machine. This manual provides essential information for the safe and effective operation, setup, and maintenance of your device. Please read this manual thoroughly before use and retain it for future reference.

2. Informações de segurança

AVISO: O não cumprimento destas instruções de segurança pode resultar em ferimentos graves ou danos materiais.

• Always wear appropriate personal protective equipment, including eye protection and gloves, when handling CO2 cylinders and operating the machine.
• Ensure the CO2 cylinder is securely connected and upright during operation.
• Do not point the CO2 jet directly at people, animals, or sensitive equipment. The CO2 output is extremely cold and can cause frostbite or damage.
• Operate the machine in a well-ventilated area to prevent CO2 accumulation, which can displace oxygen.
• Keep the machine away from heat sources, open flames, and flammable materials.
• Do not modify the device or use non-original parts. This may void the warranty and create safety hazards.
• Disconnect the CO2 cylinder and power supply before cleaning or maintenance.
• Certifique-se de que todas as conexões elétricas estejam seguras e livres de danos.

3. Produto acabadoview

The MOKA SFX LED CO2 Jet Machine is a handheld device designed to produce dramatic CO2 fog effects with integrated LED illumination. It features a robust construction and a quick-connect system for ease of use.

Figura 3.1: Principal view of the MOKA SFX LED CO2 Jet Machine.

3.1 Componentes

• CO2 Nozzle: Emits the CO2 jet.
• Barra de luz LED: Integrated multi-color LEDs for visual effects.
• Alça do gatilho: Activates the CO2 jet.
• Conector rápido: For attaching the high-pressure CO2 hose.
• Compartimento da bateria: Houses the power source for the LEDs.
• Botões de controle: For managing LED functions.

Figura 3.2: Detalhado view of key components including the quick connector, handle, control buttons, and LED nozzle.

Figure 3.3: High brightness lamp beads at the nozzle for enhanced visual effects.

4. Configuração

Follow these steps to prepare your MOKA SFX LED CO2 Jet Machine for operation:

1. Instale as baterias: Open the battery compartment (usually located on the handle) and insert the required batteries for the LED lights. Ensure correct polarity.
2. Conecte a mangueira de alta pressão: Attach one end of the provided 3-meter high-pressure hose to the quick connector on the CO2 jet machine. Ensure it is securely fastened to prevent leaks.
3. Connect to CO2 Cylinder: Connect the other end of the high-pressure hose to your CO2 gas cylinder. Tighten the connection firmly using an appropriate wrench.
4. Secure CO2 Cylinder: Ensure the CO2 cylinder is placed on a stable, flat surface or secured in an upright position to prevent it from falling.
5. Verifique as conexões: Double-check all connections for tightness. A small amount of soapy water can be applied to connections to detect any gas leaks (bubbles will form).

Figure 4.1: The quick connector ensures a swift and safe connection to the CO2 tank, preventing leaks.

Figure 4.2: The 3M high-pressure hose and quick connector for secure CO2 supply.

5. Instruções de operação

Once the machine is set up and all connections are secure, you can begin operation:

1. Open CO2 Cylinder Valve: Slowly open the main valve on your CO2 gas cylinder. You may hear a hiss as the gas fills the hose.
2. Ativar LEDs: Use the control buttons on the machine to turn on the LED lights and select your desired color or effect.
3. Initiate CO2 Jet: Point the nozzle in a safe direction, away from people and objects. Press the trigger handle to release a burst of CO2 fog. Release the trigger to stop the jet.
4. Control Duration: Short, controlled bursts are recommended to conserve CO2 and maintain optimal effect. Avoid continuous spraying for extended periods.
5. Observe Spray Height: The machine can spray CO2 up to 20-25 feet. Be mindful of overhead obstacles and audience proximity.

Figure 5.1: The CO2 jet machine can achieve a spray height of 20-25 feet.

6. Manutenção

Regular maintenance ensures the longevity and reliable performance of your CO2 jet machine.

• Limpeza: After each use, wipe down the exterior of the machine with a clean, dry cloth. Do not use abrasive cleaners or solvents.
• Verifique as conexões: Periodically inspect the high-pressure hose and all connectors for signs of wear, damage, or leaks. Replace any damaged components immediately.
• Substituição da bateria: Replace LED batteries as needed to ensure consistent light output.
• Armazenar: When not in use, disconnect the CO2 cylinder and store the machine in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Solução De Problemas

8. Especificações

9. Garantia e Suporte

This product is manufactured by MOKA SFX. For specific warranty details and customer support, please refer to the documentation provided at the time of purchase or contact MOKA SFX directly. Standard return policies typically allow for returns or replacements within 31 days of purchase.

For further assistance, please visit the official MOKA SFX website ou entre em contato com o departamento de atendimento ao cliente.