1. Introdução
This manual provides essential instructions for the safe and effective use of your YUSTDA AC/DC Adapter. This adapter is designed to provide power and charge the battery packs of compatible Trimble GeoExplorer 7/7X series (Geo7x, G7x, Geo 7x, G 7x) and Trimble GeoExplorer 6000 series (GeoXH, GeoXT, 88950, 88950-20) handheld devices.
Figura 1: YUSTDA AC/DC Adapter. This image displays the main adapter unit with its attached power cord, illustrating its compact design.
2. Informações de segurança
Leia e compreenda todas as instruções de segurança antes de usar este produto. O não cumprimento dessas instruções pode resultar em choque elétrico, incêndio ou outros riscos.
- Somente para uso interno: Este adaptador foi projetado para uso interno em locais secos. Não o exponha à chuva, umidade ou temperaturas extremas.
- Volume adequadotage: Certifique-se de que a tomada de parede voltage is within the adapter's specified input range (100-240VAC).
- Evite sobrecarga: Não sobrecarregue tomadas elétricas ou cabos de extensão.
- Manuseie com cuidado: Do not drop, disassemble, or attempt to repair the adapter. Refer servicing to qualified personnel.
- Integridade do cabo: Inspect the power cord for damage before each use. Do not use if the cord is frayed or damaged.
- Ventilação: Ensure adequate ventilation around the adapter during use. Avoid covering it with cloths or placing it in enclosed spaces.
- Desconecte quando não estiver em uso: Desconecte o adaptador da tomada quando não estiver em uso por longos períodos.
Figura 2: Adapter with Caution Label. This image highlights the caution label on the adapter, advising against use in wet locations and emphasizing indoor use only.
3. Instruções de configuração
- Verificar compatibilidade: Ensure your device is a compatible Trimble GeoExplorer 7/7X series (Geo7x, G7x, Geo 7x, G 7x) or 6000 series (GeoXH, GeoXT, 88950, 88950-20) handheld.
- Conectar ao dispositivo: Insert the adapter's output connector securely into the power input port of your Trimble device.
- Conecte à tomada elétrica: Plug the AC input prongs of the adapter into a standard 100-240VAC wall outlet.
- Indicador de energia: Some devices may have a charging indicator light. Observe this light to confirm the device is receiving power and charging.
Figura 3: Adapter Connected to Power. This image shows the YUSTDA AC/DC adapter plugged into a power strip, demonstrating a typical connection scenario.
4. Instruções de operação
Once properly connected, the adapter will automatically begin supplying power to your Trimble device and charging its battery. The adapter is designed for continuous operation within its specified limits.
- The adapter provides a stable power supply for your device.
- It is compatible with worldwide input voltage (100-240VAC, 50/60Hz).
- The adapter features built-in protection mechanisms for safety and device longevity.
5. Manutenção
To ensure the longevity and optimal performance of your YUSTDA AC/DC Adapter, follow these simple maintenance guidelines:
- Limpeza: Disconnect the adapter from the power source and the device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Armazenar: Store the adapter in a cool, dry place when not in use. Avoid wrapping the cable too tightly around the adapter to prevent damage.
- Inspeção: Periodically inspect the adapter and its cable for any signs of wear, cuts, or damage. If damage is observed, discontinue use immediately.
6. Solução De Problemas
If you encounter issues with your YUSTDA AC/DC Adapter, refer to the following common problems and solutions:
| Problema | Possível causa | Solução |
|---|---|---|
| O dispositivo não está carregando/ligando. |
|
|
| O adaptador fica quente durante o uso. | Operação normal. | A slight warmth is normal during operation. If the adapter becomes excessively hot or emits smoke/odor, unplug immediately and discontinue use. Ensure adequate ventilation. |
| Intermittent charging. | Conexão solta ou cabo danificado. | Check all connections. Inspect the cable for damage. |
This adapter includes built-in protection features such as overload protection, over-charge/discharge protection, overheating protection, anti-interference, and short-circuit protection to safeguard your device.
7. Especificações
- Marca: YUSTDA
- Número do modelo: A180421094
- Vol de entradatage: 100-240 VCA, 50/60 Hz
- Volume de saídatage: Compatible with specified Trimble devices. (Note: The provided source data lists '240 Volts' for output, which is likely an error. This adapter provides appropriate DC voltage for the compatible devices.)
- Tipo de conector: Proprietário
- Dispositivos compatíveis: Trimble Geo GeoExplorer 7 series, Geo7x, G7x, Geo 7x, G 7x, GeoXH, Geo XT, 6000 series GPS handhelds.
- Características especiais: Overload Protection, Over-charge/discharge protection, Overheating Protection, Anti-Interference, Short-circuit protection.
- Peso do item: 8 onças (aproximadamente 227 gramas)
8. Garantia e Suporte
For warranty information, technical support, or service inquiries regarding your YUSTDA AC/DC Adapter, please contact the manufacturer directly. Refer to the product packaging or the point of purchase for specific contact details.