DROK 200350 Timer Relay User Manual

1. Terminadoview

This manual provides detailed instructions for the DROK 5V/12V/24V Time Delay Relay Switch, Model 200350. This versatile module features an LCD display for clear parameter viewing and supports various timing modes for diverse applications. It is designed for precise control of electrical circuits based on time delays or cycles.

2. Recursos do Produto

Independent Parameters: OP (On-time), CL (Off-time), and LOP (Loop count) parameters can be modified and saved independently for each mode.
Salvamento automático: All configured parameters are automatically saved and retained even after power loss.
Tela LCD: Equipped with an LCD screen to clearly show the current operating mode and set parameters.
Micro USB Power Supply: Supports 5V power input via Micro USB for convenience.

3. Produto acabadoview e Componentes

The DROK Timer Relay module features clearly labeled components for easy identification and connection.

DROK Timer Relay with labeled components — **Figura 1:** DROK Timer Relay with key components labeled, including power input, trigger inputs, relay outputs, Micro USB port, LCD display, and control buttons (STOP, SET, UP, DOWN).

Os principais componentes incluem:

Power Supply Terminals: For 6.0V-30V DC input.
Micro USB 5.0V Power Supply: Alternative 5V power input.
High/Low Level Trigger Inputs: Para sinais de controle externos.
Relay Output Terminals (NC, COM, NO): Normally Closed, Common, Normally Open contacts for controlling external loads.
Tela LCD: Shows current mode and timing parameters.
Control Buttons (STOP, SET, UP, DOWN): Used for mode selection and parameter adjustment.
Relay Closing Indicator: LED that illuminates when the relay is active.

4. Especificações

Especificação	Valor
Número do modelo	200350
Marca	DROK
Vol da fonte de alimentaçãotage	5V (Micro USB) / 6V-30V DC
Classificação atual	5 Amps
Corrente máxima de comutação	5 Amps
Vol máximo de comutaçãotage	30 Volts
Vol mínimo de comutaçãotage	3 Volts
Tipo de contato	Normalmente aberto
Intervalo de tempo	0.01 segundos a 9999 minutos
Dimensões	80 mm x 39 mm (aproximadamente 3.15 x 1.54 polegadas)
Temperatura de operação	Até 85 graus Celsius

Dimensions of the DROK Timer Relay module — **Figura 2:** Physical dimensions of the DROK Timer Relay module.

5. Configuração e fiação

Proper wiring is crucial for the safe and correct operation of the timer relay. Ensure all connections are secure before applying power.

5.1 Conexão da Fonte de Alimentação

The module can be powered by either a Micro USB 5V supply or a 6V-30V DC supply connected to the screw terminals. Do not connect both simultaneously.

Close-up of Micro USB port for 5V power supply — **Figura 3:** Porta micro USB para entrada de energia de 5V.

Close-up of power supply terminals for 6V-30V DC input — **Figura 4:** Screw terminals for 6V-30V DC power input.

5.2 Fiação de Carga

The relay provides Normally Open (NO), Common (COM), and Normally Closed (NC) contacts. Connect your load to the appropriate terminals based on your application's requirements.

Wiring diagram for weak current control of a strong current load — **Figura 5:** Wiring diagram for controlling a strong current load (e.g., 220VAC) with the relay using a weak current trigger.

Weak Current Control Strong Current Wiring: As shown in Figure 5, the relay can switch a high-voltage/high-current load (e.g., 220VAC) using the relay contacts, while the module itself is powered by a low-voltage DC supply. The load's power source is separate from the module's power source.

Wiring diagram for sharing one power supply between the module and the load — **Figura 6:** Wiring diagram for sharing a single power supply between the module and the load.

Sharing One Power Supply Wiring: As shown in Figure 6, if the load operates on the same voltage as the module's power supply (6V-30V DC), you can use a single power source for both the module and the load, connecting the load through the relay contacts.

6. Instruções de operação

The DROK Timer Relay offers multiple operating modes and adjustable parameters. This section details how to navigate and configure these settings.

6.1 Parâmetros de configuração

Para entrar no modo de configuração de parâmetros, pressione e mantenha pressionado o DEFINIR button for 3 seconds. The display will show the current mode (e.g., P1.1). Use the UP e ABAIXO buttons to select the desired mode. Once a mode is selected, press DEFINIR briefly to cycle through its parameters (OP, CL, LOP). Use UP e ABAIXO to adjust the values. To change the decimal point position (for seconds, milliseconds, etc.), press the PARAR button while adjusting the time parameter.

Close-up of the LCD display showing mode and parameters — **Figura 7:** LCD display showing the current mode and parameters.

Close-up of the control buttons (STOP, SET, UP, DOWN) — **Figura 8:** Control buttons for setting modes and parameters.

Modos de Operação 6.2

The module supports seven distinct operating modes (P1-P7), each designed for specific timing applications.

1 vídeo: A detailed explanation of the DROK 200350 Timer Relay's operating modes and parameter setting process. This video demonstrates how to navigate through the different modes (P1-P7) and adjust their respective timing parameters (OP, CL, LOP) using the control buttons.

P1 (Time Delay On): Upon receiving a trigger, the relay activates (OP time) and then deactivates (CL time). Multiple triggers during the cycle have no effect.
P2 (Time Delay On with Reset): Similar to P1, but a new trigger received during the cycle will reset the timer and restart the cycle.
P3 (Time Delay On/Off with Stop): Similar to P1, but a subsequent trigger during the cycle will immediately stop the current cycle.
P4 (Delay then Open): This mode involves two parameters: CL (time to wait before the cycle starts) and OP (duration of the cycle after the delay). Intermittent triggers during the delay or active cycle have no effect.
P5 (Delay then Open with Loop): Similar to P4, but includes an additional parameter, LOP (Loop count), which specifies how many times the CL-OP sequence should repeat after the initial trigger.
P6 (Power-On Trigger): Similar to P5, but the cycle automatically begins upon power-on, without requiring an external trigger. This mode is useful for applications that need to start immediately when power is supplied.
P7 (Hold Open on Trigger): Upon receiving a trigger, the relay remains active (open) for as long as the trigger signal is held. Once the trigger is released, the relay will remain active for a specified OP time before deactivating. This mode has only one parameter: OP.

7. Manutenção

The DROK Timer Relay is designed for durability and requires minimal maintenance. To ensure optimal performance and longevity:

Mantenha o módulo limpo e livre de poeira e umidade.
Evite expor o módulo a temperaturas extremas ou luz solar direta.
Ensure all wiring connections remain tight and secure.
Não exceda o volume especificadotage and current ratings for the power supply and relay contacts.

8. Solução De Problemas

If you encounter issues with your DROK Timer Relay, consider the following troubleshooting steps:

Sem imagem/Sem energia: Check the power supply connections and ensure the voltage is within the specified range (5V via Micro USB or 6V-30V DC). Verify the power source is functioning correctly.
Relé não está ativando: Confirm the trigger input is correctly connected and providing the expected signal (high or low level). Check the selected operating mode and its parameters (OP, CL, LOP) to ensure they are configured as intended.
Tempo incorreto: Review the OP, CL, and LOP parameters for the selected mode. Ensure the decimal point is set correctly for seconds, milliseconds, or minutes.
Comportamento inesperado: Reset the module to factory defaults (if available, consult specific product documentation for reset procedures) and reconfigure the desired mode and parameters. Verify external wiring for any shorts or loose connections.

9. Garantia e Suporte

For warranty information and technical support, please refer to the official DROK website or contact their customer service. Specific warranty terms and conditions may vary.

	Módulo de relé temporizador digital de retardo DROK 300473 12V - Parâmetros, recursos e configurações Informações detalhadas sobre o módulo de relé temporizador digital de retardo DROK 300473 de 12V, incluindo parâmetros do produto, características, funções (modos P-1 a P-4) e instruções de configuração para controle preciso de temporização.
	Relé Temporizador DROK 200350: Especificações Técnicas, Modos e Operação Guia completo do relé temporizador DROK 200350, detalhando sua descrição do módulo, especificações técnicas, sete modos de operação (P1-P7), seleção da faixa de temporização, diagramas de fiação, comunicação UART e procedimentos de configuração de parâmetros.
	Módulo de relé de temporização Drok SKU:200088 - Especificações técnicas e funções Especificações técnicas detalhadas, características e 18 funções operacionais do módulo de relé de temporização Drok SKU:200088. Inclui parâmetros, restrições de uso e instruções de operação para controle eletrônico.
	Módulo de relé temporizador digital DROK 2001711005: Instruções e especificações Instruções detalhadas, configurações de parâmetros e guia de fiação para o módulo de relé temporizador digital DROK 2001711005. Aprenda a configurar o tempo, os modos de operação e as configurações de energia.
	DROK 200399 Timer Relay: Features, Specifications, and Operation Guide A comprehensive guide to the DROK 200399 Timer Relay, detailing its module description, key parameters, seven working modes (P1-P7), timing range selection, wiring diagrams, remote data functions, and parameter setting procedures. Includes features like sleep mode and one-button stop.
	Módulo de fonte de alimentação ajustável DROK DC-DC Buck de 12A com display LCD Especificações técnicas detalhadas e guia de aplicação para o módulo conversor buck DC-DC DROK (SKU: 2001711007). Esta fonte de alimentação ajustável de 12A possui um display LCD e tensão constante.tagModos de corrente contínua (CV) e corrente constante (CC), adequados para uso como módulo buck-boost, carregador de bateria ou driver de LED. Inclui instruções de operação, parâmetros e precauções de segurança.

DROK 200350