1. Introdução
Thank you for choosing the ONKRON M5 WHT Full Motion TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new wall mount. Please read these instructions thoroughly before beginning installation and retain them for future reference.
The ONKRON M5 WHT is designed to securely hold flat-panel televisions and monitors ranging from 37 to 70 inches, with a maximum weight capacity of 40 kg (88 lbs). It supports VESA mounting patterns from 100x100mm up to 400x400mm, offering full motion capabilities including swivel, tilt, and extension for optimal viewângulos de inclinação.
2. Informações de segurança
WARNING: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty.
- This product is intended for installation by qualified personnel only. If you are unsure about the installation process, consult a professional installer.
- Ensure the mounting surface (wall) can safely support the combined weight of the mount and your television. The wall must be capable of supporting at least four times the weight of the TV and mount.
- Não exceda a capacidade máxima de carga de 40 kg (88 libras).
- Verify your TV's VESA mounting pattern (distance between mounting holes on the back of your TV) is within the range of 100x100mm a 400x400mm.
- Use only the hardware provided or specified in this manual. Do not use power tools to tighten screws excessively, as this may damage the hardware or the mounting surface.
- Keep all small parts and packaging materials out of reach of children, as they may pose a choking hazard.
- Always check for hidden electrical wires, water pipes, or gas lines in the wall before drilling. Use a stud finder and a reliable method to confirm wall composition.
- Do not install this product on drywall alone. It must be mounted to a solid wood stud, concrete, or brick wall.
3. Conteúdo da embalagem
Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or defective, contact ONKRON customer support.

Imagem: Acimaview of the ONKRON M5 WHT TV Wall Mount package, showing the mount, various screws, washers, spacers, and a wrench, alongside the instruction manual and product box.
O pacote normalmente inclui:
- Conjunto de placa de parede
- TV Bracket Arms (Vertical Rails)
- Extension Arms (if required for larger VESA patterns)
- Kit de ferragens para montagem (diversos parafusos, arruelas e espaçadores para montagem de TV e parede)
- Chave inglesa
- Manual de instruções
4. Especificações
| Modelo | M5 BRANCO |
| Marca | ONKRON |
| Tamanhos de TV compatíveis | 37 - 70 polegadas |
| Capacidade Máxima de Carga | 40 kg (88 libras) |
| Compatibilidade VESA | 100x100mm, 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm |
| Ângulo de inclinação | +12° / -2° |
| Ângulo de giro | +/- 120 ° |
| Distância da parede (mín.-máx.) | 45 mm - 450 mm (1.7 - 17.7 polegadas) |
| Material | Liga de aço |
| Cor | Branco |
| Dimensões do produto | 56 x 25 x 23 cm (dobrado) |
| Peso do produto | 3.83 kg |

Image: Detailed VESA compatibility diagram for the ONKRON M5 WHT mount, illustrating various hole patterns from 100x100mm to 400x400mm.
5. Configuração e instalação
5.1 Lista de verificação de pré-instalação
- Verificar compatibilidade com a TV: Check your TV's weight and VESA mounting pattern against the mount's specifications.
- Identificar o tipo de parede: Determine if your wall is solid concrete, brick, or wood stud. Do not install on drywall alone.
- Reunir ferramentas: You will need a drill, stud finder (for wood studs), level, tape measure, pencil, and a Phillips head screwdriver.
- Área clara: Ensure the installation area is clear of obstructions and provides enough space to work safely.
5.2 Montagem da placa de parede
- Mark Mounting Location: Use a stud finder to locate the center of a wood stud. Mark the desired height for the top of your TV. Use a level to ensure the marks for the wall plate are perfectly horizontal.
- Furos piloto de perfuração: Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the lag bolts provided. For wood studs, typically a 5.5mm (7/32") bit is used. For concrete/brick, a 10mm (3/8") masonry bit is usually required, along with wall anchors.
- Placa de parede segura: Attach the wall plate to the wall using the provided lag bolts and washers. Tighten them firmly but do not overtighten. Ensure the wall plate is level.
5.3 Fixação dos suportes de TV à TV
- Selecione parafusos de TV: Choose the correct diameter and length of screws (M4, M6, M8) that fit your TV's mounting holes. Use washers and spacers if necessary to ensure a snug fit and prevent damage to the TV.
- Attach Vertical Rails: Secure the two vertical TV bracket rails to the back of your television. Ensure they are centered and aligned vertically. The hooks on the rails should face upwards.
- Attach Extension Arms (if needed): For larger VESA patterns (e.g., 400x400mm), attach the extension arms to the vertical rails using the provided hardware.
5.4 Montagem da TV na placa de parede
- Lift and Hook TV: With assistance, carefully lift the television and hook the vertical TV bracket rails onto the wall plate. Ensure both rails are securely seated on the wall plate.
- Parafusos de segurança seguros: Locate the safety screws at the bottom of the vertical rails. Tighten these screws to lock the TV onto the wall plate, preventing accidental dislodgement.
6. Instruções de operação
The ONKRON M5 WHT mount offers flexible positioning for your TV. Always handle the TV gently when making adjustments.
6.1 Adjusting Extension and Swivel

Image: The ONKRON M5 WHT mount demonstrating its extension capabilities, from a slim folded position (1.7 inches from wall) to a fully extended position (17.7 inches from wall).
To extend or retract the TV from the wall, gently pull or push the television. The articulated arms will allow the TV to move smoothly. To swivel the TV left or right, gently rotate the screen to your desired viewing angle. The mount allows for a swivel of up to +/- 120 degrees.
6.2 Ajuste de inclinação

Image: The ONKRON M5 WHT mount illustrating its tilt function, showing angles from -2 degrees to +10 degrees, with a close-up of the tilt adjustment mechanism.
The mount allows for a tilt range of +12 degrees upwards and -2 degrees downwards. To adjust the tilt, loosen the tilt adjustment knobs or bolts on the TV bracket arms, set the TV to the desired angle, and then re-tighten the knobs/bolts to secure the position. This helps reduce glare and optimize viewindo.
6.3 Gerenciamento de cabos
The ONKRON M5 WHT features integrated cable management clips along the arms. Route your TV cables through these clips to keep them organized and prevent tangling, contributing to a clean and tidy appearance.
7. Manutenção
- Limpeza: Limpe a superfície com um pano macio e seco. Não utilize produtos de limpeza abrasivos ou solventes, pois podem danificar o acabamento.
- Verificações periódicas: Verifique periodicamente todos os parafusos e porcas para garantir que permaneçam apertados e seguros. Reaperte-os, se necessário.
- Lubrificação: The moving parts of the mount are designed for smooth operation. No lubrication is typically required. If movement becomes stiff, ensure no debris is obstructing the joints.
8. Solução De Problemas
- A TV não está nivelada: Check the wall plate and TV bracket rails with a level. Adjust the wall plate if possible, or use the fine-tuning adjustments on the TV brackets if available. Ensure all screws are tightened evenly.
- Dificuldade em mover a TV: Ensure all adjustment knobs/bolts are sufficiently loosened before attempting to move the TV. Check for any obstructions or cables caught in the mechanism.
- A TV parece instável: Immediately remove the TV from the mount. Re-check all installation steps, especially the wall mounting and TV bracket attachment. Ensure all screws are securely tightened and the wall can support the weight. If unsure, consult a professional.
- Partes faltando: Refer to the 'Package Contents' section. If parts are missing, contact ONKRON customer support for assistance.
9. Garantia e Suporte
ONKRON products are manufactured with quality and durability in mind. For warranty information, technical support, or to purchase replacement parts, please visit the official ONKRON website ou entre em contato com o departamento de atendimento ao cliente.
You can find more information and contact details on the ONKRON brand store: ONKRON Store





