Introdução
This manual provides detailed instructions for the installation, operation, and maintenance of your JBL PRV-175 Marine Gauge Hole Mount USB Bluetooth AM/FM Digital Stereo Receiver and accompanying 6.5" 2-Way Marine Speakers. Please read this manual thoroughly before attempting installation or operation to ensure proper use and to prevent damage.
Informações de segurança
- Always disconnect the vehicle's battery negative terminal before installation to prevent electrical shorts.
- Certifique-se de que toda a fiação esteja devidamente isolada e fixada para evitar danos causados por vibração ou abrasão.
- Do not operate the unit in a manner that distracts you from safe navigation.
- Consult a qualified marine electronics technician if you are unsure about any installation steps.
- This product is designed for marine environments; however, avoid direct high-pressure water spray on the unit.
Conteúdo da embalagem
Verifique se todos os itens estão presentes no seu pacote:
- JBL PRV-175 Marine Gauge Hole Mount USB Bluetooth AM/FM Digital Stereo Receiver
- Two (2) pairs of 6.5" 225 Watt Peak Power High-Performance 2-Way Marine Speakers
- Mounting hardware for receiver (typically U-bracket, nuts, washers)
- Manual do usuário (este documento)
Observação: Speaker mounting hardware and speaker wire are typically not included and must be purchased separately.
Configuração e instalação
Receiver Installation (JBL PRV-175)
The PRV-175 receiver is designed for marine gauge-style mounting, fitting into a standard tachometer opening.
- Escolha um local de montagem: Select a flat, secure surface on your boat's dashboard or console that can accommodate the receiver's dimensions and provides adequate clearance for wiring.
- Cut the Mounting Hole: Using a suitable hole saw, cut a circular opening of approximately 3 inches (76mm) in diameter. Refer to the included template for precise measurements.
- Fiação: Connect the power, ground, speaker outputs, and auxiliary inputs/outputs according to the wiring diagram provided with the unit. Ensure all connections are secure and waterproof.
- Monte o receptor: Insert the receiver into the opening. Secure it from the rear using the supplied U-bracket, nuts, and washers. Tighten until snug, but do not overtighten.
Imagem: Frente view of the JBL PRV-175 Marine Stereo Receiver, showing the display and control buttons. This unit is designed for gauge-style mounting.
Speaker Installation (6.5" Marine Speakers)
The 6.5" marine speakers are designed for flush mounting in suitable locations on your boat.
- Selecione os locais de montagem: Choose locations that provide optimal sound dispersion and are structurally sound. Ensure there is sufficient depth behind the mounting surface for the speaker magnet.
- Cut Speaker Openings: Carefully cut circular openings for the speakers, typically around 5.6 inches (142mm) in diameter. Refer to the speaker's template for exact dimensions.
- Conecte os fios do alto-falante: Run speaker wires from the receiver to each speaker location. Connect the positive (+) and negative (-) terminals of the speaker to the corresponding wires from the receiver. Ensure correct polarity for optimal sound.
- Monte os alto-falantes: Place the speakers into the openings and secure them using appropriate marine-grade screws (not included) through the mounting holes on the speaker frame.
Imagem: Frente view of a JBL 6.5-inch Marine Speaker with a chrome grille. These speakers are designed for flush mounting in marine environments.
Instruções de operação
Ligar/Desligar
- Pressione e segure o MODE/SEL Botão para ligar ou desligar a unidade.
Controle de volume
- Imprensa VOL+ para aumentar o volume.
- Imprensa vol- para diminuir o volume.
Seleção de fonte
- Pressione o MODE/SEL button repeatedly to cycle through available sources: AM, FM, Bluetooth (BT MUSIC), USB, and Auxiliary (AUX).
Operação de rádio AM / FM
- In AM/FM mode, press the VARREDURA/APS button to automatically scan and store strong stations.
- Use o Faixa anterior (◀◀) e Próxima faixa (▶▶) buttons to manually tune or seek through stations.
Streaming de áudio Bluetooth
- Emparelhamento: Select BT MUSIC mode. On your Bluetooth-enabled device, search for available devices and select "JBL PRV-175". Enter "0000" if a passcode is required.
- Reprodução: Once paired, you can stream audio from your device. Use the Reproduzir/Pausar (▶▶) button on the receiver to control playback. Use the Faixa anterior (◀◀) e Próxima faixa (▶▶) buttons to skip tracks.
Reprodução USB
- Insert a USB drive (containing compatible audio files) into the USB port. The unit will automatically switch to USB mode and begin playback.
- Use o Reproduzir/Pausar (▶▶), Faixa anterior (◀◀), e Próxima faixa (▶▶) buttons to control playback.
Entrada auxiliar
- Connect an external audio device to the auxiliary input using a 3.5mm audio cable.
- Select AUX mode on the receiver. Audio playback is controlled from the connected device.
Manutenção
- Limpeza: Use um pano macio e macioamp cloth to clean the receiver's faceplate and speaker grilles. Avoid harsh chemicals or abrasive cleaners.
- Conexões: Periodically check all wiring connections for corrosion or looseness, especially in marine environments.
- Armazenar: If the boat is stored for an extended period, ensure the unit is powered off and consider disconnecting the battery.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Sem energia para a unidade | Blown fuse; improper wiring; battery disconnected | Check and replace fuse; verify power and ground connections; ensure battery is connected. |
| Não há som nos alto-falantes | Incorrect source selected; speaker wires disconnected; volume too low; ampproblema do lifier | Select correct source; check speaker wire connections; increase volume; consult technician if ampSuspeita-se de amplificador. |
| Bluetooth não conecta | Unit not in BT MUSIC mode; device not in pairing mode; interference | Ensure receiver is in BT MUSIC mode; put device in pairing mode; move device closer to receiver; try re-pairing. |
| USB não reproduz | Incompatível file format; USB drive not recognized; unit not in USB mode | Garantir files are compatible (e.g., MP3); try a different USB drive; select USB mode. |
Especificações
JBL PRV-175 Marine Receiver
- Tipo: Marine Gauge Style Digital Media Receiver
- Sintonizador: AM/FM
- Conectividade: Bluetooth Audio Streaming, USB input (for USB drives only), Auxiliary input (3.5mm Jack)
- Ampmais vital: Built-In, 45 Watts Peak x 4 channels (20 Watts RMS x 4 channels)
- Painel frontal: Impermeável
- Saídas: 2 pares de saída RCA
- Controlar: Opção de controle remoto com fio
- Número do modelo: PRV-175
6.5" Marine Speakers
- Tipo: 2-way 6-1/2" marine speaker
- Manuseio de energia: 2-75 Watts RMS, 225 Watts Peak Power
- Woofers: Cone de polipropileno com borda de borracha
- Tweeter: Grille-mounted 1" polypropylene semi-dome
- Cesta: Cast-polymer
- Resposta de frequência: 50-20,000 Hz
- Sensibilidade: 92 dB
Em geral
- Peso do item: 8.34 libras (pacote total)
- Dimensões da embalagem: 16.14 x 12.76 x 10.71 polegadas
- Fabricante: JBL
- Cor: Preto
Garantia e Suporte
Para informações sobre garantia e suporte técnico, consulte o cartão de garantia incluído com o seu produto ou visite o site oficial da JBL. website. You may also contact JBL customer service directly for assistance with product operation, troubleshooting, or parts.
