1. Introdução
This manual provides essential information for the safe and efficient operation of your Behringer NX1000 Ultra-Lightweight 1000W Class-D Power Amplifier. Please read this manual thoroughly before using the product to ensure proper setup, usage, and maintenance.
Frente view of the Behringer NX1000 ampamplificador, showcasingraças ao seu design compacto e aos controles no painel frontal.
2. O que está na caixa
Verifique se todos os componentes estão presentes ao desembalar:
- Behringer NX1000 Ultra-Lightweight 1000-Watt Class-D Power Ampmais vivo
- Cabo de energia
- Manual de Instruções (este documento)
3. Principais características
- Delivers 2 x 500 watts into 2 ohms; 2 x 300 watts into 4 ohms; 1000 watts into 4 ohms (Bridge mode) and weighs less than 7.3 lbs/ 3.3 kg.
- Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup.
- Fonte de alimentação comutada ultraeficiente para áudio livre de ruídos, resposta transiente superior e baixo consumo de energia.
- Built-in stereo crossover with low-cut, high-cut and full range Mode.
- SmartSense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance.
An efficiency graph illustrating the superior performance of Class-D technology compared to Class-AB, showing higher efficiency across various output power levels.
A frequency response graph demonstrating the linear output achieved by SmartSense loudspeaker impedance compensation, ensuring consistent sound quality regardless of speaker load.
4. Configuração
Proper setup is crucial for optimal performance and safety. Follow these guidelines for connecting your ampmais vital:
4.1. Montagem em Rack
The NX1000 is designed for standard 19-inch rack mounting. Secure the amplifier using appropriate rack screws through the rack ears on both sides of the unit.
Lado profissionalfile of the Behringer NX1000 amplifier, highlighting its rack-mountable chassis.
4.2. Conexões de áudio
Conecte sua fonte de áudio (mixer, pré-amplificador)ampamplificador, etc.) para o amplifier's input jacks. The NX1000 supports both XLR and 1/4-inch TRS connectors for balanced input signals.
Connect your passive loudspeakers to the amplifier's output terminals. The NX1000 provides both speakON and binding post outputs for flexible speaker connectivity.
Detalhado view of the rear panel, showing input and output connectors for audio signals and speakers.
4.3. Conexão de energia
Connect the supplied power cable to the AC inlet on the rear panel of the ampAmplificador e, em seguida, a uma tomada elétrica adequada.
4.4. Guia de Instalação em Vídeo
A step-by-step guide on how to set up D Series amplifiers, covering speaker connections, input sources, and mode selection for various audio configurations.
5. Operando o Ampmais vivo
5.1. Ligar / desligar
Pressione o PODER interruptor no painel frontal para ligar o amplifier on or off. The PODER LED will illuminate when the unit is active.
Close-up of the power button, indicating its location on the front panel.
5.2. Controles de volume
Ajuste o CANAL A e CANAL B gain knobs on the front panel to set the desired output volume for each channel. The LCD display will show the decibel levels for precise adjustment.
5.3. Seleção de modo
On the rear panel, use the MODO switch to select between STEREO, PONTEADO, ou PARALELO operation, depending on your speaker configuration requirements.
- ESTÉREO: Each channel operates independently, providing separate left and right audio signals.
- BRIDGED: Combines the power of both channels into a single, high-power output, ideal for driving a single subwoofer.
- PARALELO: Sends the same mono signal to both channels, useful for driving multiple speakers with identical audio.
5.4. Configurações de Crossover
Utilize the built-in stereo crossover with low-cut, high-cut, and full-range modes to optimize the frequency response for your specific speakers or subwoofers.
5.5. Indicadores LED
O painel frontal possui diversos indicadores LED:
- PRO (Protect): Ilumina se o amplifier enters protection mode due to overload, overheating, or short-circuit.
- LIMITE: Indicates that the output signal is approaching clipping. Reduce the input level to prevent distortion.
- SINAL: Lights up when an audio signal is present on the respective channel.
- PODER: Indica que o ampO lificador está ligado.
5.6. Produto acabadoview Vídeo
Um fimview video demonstrating the features and connectivity options of the D Series power amplifiers, including front panel controls, input/output configurations, and operational modes.
6. Manutenção
Para garantir a longevidade e o desempenho ideal do seu amplifier, follow these maintenance tips:
- Mantenha o aparelho limpo, passando um pano macio e seco. Evite usar produtos de limpeza abrasivos ou solventes.
- Garanta ventilação adequada ao redor do amplifier to prevent overheating. Do not block the ventilation grilles.
- Regularly check all cable connections for secure fit and signs of wear.
7. Solução De Problemas
If you encounter issues with your Behringer NX1000 ampPara obter informações sobre amplificadores, consulte os seguintes problemas comuns e suas soluções:
- Sem saída de som:
- Check all audio input and output connections.
- Garantir o amplifier is powered on and the POWER LED is illuminated.
- Verify that input sources are active and sending a signal.
- Adjust channel gain knobs and master volume on your mixer/preamp.
- Som distorcido:
- Check if the LIMIT LED is illuminated; reduce input level if it is.
- Certifique-se de que a impedância do alto-falante corresponda à ampcapacidades do lifier.
- Inspect speaker cables for damage or incorrect wiring.
- Amplifier Enters Protect Mode (PRO LED illuminated):
- Desligue o amplifier and disconnect all speakers.
- Check for short circuits in speaker cables or faulty speakers.
- Ensure proper ventilation to prevent overheating. Allow the unit to cool down.
- Verify that the speaker load impedance is within the amplifier's specified range (e.g., not below 2 ohms per channel).
- Ruído excessivo da ventoinha:
- Garantir o amplifier has sufficient airflow and is not in an enclosed space.
- Clean any dust buildup from the fan and ventilation grilles.
8. Especificações
| Recurso | Detalhe |
|---|---|
| Nome do modelo | NX1000 |
| Saída de Potência (2 Ohms) | 2 x 500 watts |
| Saída de Potência (4 Ohms) | 2 x 300 watts |
| Power Output (4 Ohms Bridged) | 1000 Watts |
| Peso | 7.3 libras / 3.3 kg |
| Ampclasse mais vital | Classe D |
| Loudspeaker Impedance Compensation | Sentido inteligente |
| Cruzamento | Built-in stereo (low-cut, high-cut, full range) |
| Fonte de energia | Ultra-efficient switch-mode |
| Dimensões do produto | 19.02 x 9.09 x 3.7 polegadas |
| Tecnologia de Conectividade | Com fio |
| Modo de saída de áudio | Estéreo |
| Número de circuitos | 2 |
9. Garantia e suporte
The Behringer NX1000 ampO lificador vem com um Garantia limitada. For detailed warranty information, product support, or service inquiries, please visit the official Behringer webou entre em contato diretamente com o suporte ao cliente.
Always refer to the manufacturer's official resources for the most accurate and up-to-date information regarding your product.
