Subwoofer OSD Audio SMP500DSP AmpLifier User Manual

1. Introdução

Obrigado pela compra.asing the OSD Audio SMP500DSP Subwoofer AmpAmplificador. Este manual fornece instruções detalhadas para a instalação, operação e manutenção adequadas do seu aparelho. ampAmplificador. Leia este manual atentamente antes de usar o produto para garantir o melhor desempenho e segurança.

The OSD Audio SMP500DSP is a high-performance mono-channel Class D subwoofer amplifier designed to deliver powerful and clear low-frequency sound. It is ideal for enhancing the bass response in dedicated home theater systems and media rooms.

2. Principais características

• Potência de saída: Up to 800 watts peak / 400 watts RMS at 4 ohms, utilizing highly efficient Class D technology for cool operation.
• DSP (Digital Signal Processing): Onboard DSP for precise audio control and optimization.
• Variable High-Cut Filter: Adjustable filter to route higher frequencies to main speakers, improving low-frequency effects.
• Recursos de controle: Front-mounted power, back panel adjustable gain, and a volume control limiter to protect woofers.
• Input/Output Flexibility: Low and high-level pass-through inputs/outputs for versatile connectivity.
• Detecção automática: Automatic power on/off when an audio signal is detected.
• Projeto: Rack-mountable chassis for easy integration into existing setups.
• Volumetage: Duplo 100/220 voltage compatibilidade.
• Certificações: CE & ETL rated.
• Acessórios incluídos: Controle remoto para operação conveniente.

3. Produto acabadoview

Familiarize yourself with the front and rear panels of the SMP500DSP ampmais vivo.

Figura 3.1: Painel frontal e traseiro acimaview of the SMP500DSP Amplifier. This image displays both the front panel with its display and control knob, and the rear panel showing all input/output connections and power switch.

Figura 3.2: Front Panel of the SMP500DSP Ampmais vivo. Esse view highlights the power button, service port, digital display, and main volume/control knob.

Figura 3.3: Rear Panel of the SMP500DSP Amplifier. This image shows the various input and output terminals, including RCA line inputs/outputs, speaker level inputs/outputs, 12V trigger, and the AC voltage seletor.

Controles do painel frontal:

• Botão de energia: Transforma o amplifier ligado ou desligado.
• Porta de serviço: Used for firmware updates and diagnostics.
• Tela digital: Shows current settings such as volume level and DSP parameters.
• Botão de controle: Adjusts volume and navigates DSP menu options.
  

  Figura 3.4: Detail of the Front Panel Display and Control Knob. This close-up shows the digital readout indicating volume and the tactile control knob for adjustments.

Conexões do painel traseiro:

• Entrada de linha (RCA): Stereo RCA inputs for connecting to a pre-amplificador ou receptor.
• Saída de Linha (RCA): Stereo RCA outputs for daisy-chaining to another amprificador ou dispositivo de áudio.
• Speaker Level In/Out: High-level inputs and outputs for connecting directly to speaker outputs from a receiver or ampmais vivo.
• 12V Gatilho de entrada/saída: For integration with home automation systems, allowing the amplifier to turn on/off with other equipment.
• Music On 12V Switch: Selects between music sensing or 12V trigger for auto-on functionality.
• Subwoofer Speaker Output: Binding posts for connecting your passive subwoofer. Supports Class 2 wiring, 4Ω.


Figura 3.5: Detail of Subwoofer Speaker Output Terminals. This image focuses on the binding posts used for connecting the subwoofer speaker cables.



Figura 3.6: Detail of RCA and Speaker Level Inputs/Outputs. This close-up shows the various audio input and output options available on the rear panel.

• Vol. CAtage Seletor: Switch to select between 110V and 220V operation. Ensure this is set correctly for your region before connecting power.
• Entrada de alimentação CA: For connecting the included power cord.

4. Configuração e instalação

4.1 Precauções de segurança

• Garanta sempre o amplifier is disconnected from the power outlet before making any connections.
• Verify the AC Voltage Selector switch on the rear panel is set to the correct voltage for your region (110V or 220V) before plugging in the amplifier. Incorrect voltage selection can cause severe damage to the unit.
• Não exponha o ampprotegido contra umidade ou temperaturas extremas.
• Garanta ventilação adequada ao redor do amplificador para evitar superaquecimento.

4.2 Posicionamento

The SMP500DSP amplifier can be placed on a flat surface or rack-mounted. Choose a location that is dry, well-ventilated, and away from direct sunlight or heat sources. Allow sufficient space around the unit for airflow.

4.3 Connecting Your Subwoofer

1. Garantir o ampo lificador está desligado e desconectado da tomada.
2. Connect your passive subwoofer to the "Subwoofer Speaker Output" binding posts on the rear panel. Ensure correct polarity (+ to + and – to –).
3. The SMP500DSP supports a single 4-8 ohm subwoofer or two 8-ohm subwoofers.

4.4 Conectando-se ao seu sistema de áudio

There are two primary methods for connecting the SMP500DSP to your audio system:

Method A: Using RCA Line Level Inputs (Recommended)

1. If your receiver or pre-amplifier has a dedicated subwoofer or LFE (Low-Frequency Effects) output, connect an RCA cable from that output to the "Line In" (L or R, or both for stereo) on the SMP500DSP.
2. If your source has stereo RCA outputs, connect both L and R outputs to the "Line In" L and R on the ampmais vivo.

Method B: Using Speaker Level Inputs

1. If your receiver does not have a dedicated subwoofer output, you can connect the speaker outputs of your receiver to the "Speaker Level In" terminals on the SMP500DSP.
2. Connect the main left and right speaker outputs from your receiver to the corresponding "Speaker Level In" terminals on the ampAmplificador. Certifique-se da polaridade correta.
3. You can then use the "Speaker Level Out" terminals to connect to your main left and right speakers, allowing the amplifier to pass through the full range signal.

4.5 Conexão de Energia

1. Double-check the AC Voltage Selector switch on the rear panel is set correctly (110V or 220V).
2. Connect the included power cord to the AC Power Inlet on the rear panel of the ampmais vivo.
3. Ligue a outra extremidade do cabo de alimentação a uma tomada de parede adequada.

5. Operação

5.1 Ligar/Desligar

• Pressione o botão Liga/Desliga no painel frontal para ligar o aparelho. amplifier on or off. The power indicator LED will illuminate when the unit is on.
• Detecção automática: O amplifier features an auto-sensing function. When the "Music On 12V" switch is set to "Music On", the amplifier will automatically turn on when an audio signal is detected and enter standby mode after approximately 20 minutes of no signal.
• Gatilho de 12V: If using the 12V trigger, set the "Music On 12V" switch to "12V". The amplifier will power on/off in sync with your connected equipment.

5.2 Ajustando o Volume

Rotate the large control knob on the front panel to adjust the subwoofer's volume level. The digital display will show the current volume setting.

5.3 DSP Control and Settings

The SMP500DSP features onboard DSP for advanced audio customization. Use the control knob to navigate the DSP menu on the digital display. Press the knob to select options and rotate to change values.

Key DSP settings include:

• High-Cut Filter (Crossover): Adjusts the upper frequency limit of the subwoofer. This allows you to blend the subwoofer's output seamlessly with your main speakers. Typical settings range from 30Hz to 150Hz.
• Controle de fase: Adjusts the phase of the subwoofer output (0° or 180°). This helps to ensure that the subwoofer's sound waves align correctly with your main speakers, preventing cancellation or reinforcement issues.
• Ganho/Nível: Fine-tunes the input sensitivity to match the output level of your source device.
• Volume Control Limiter: Sets a maximum volume level to prevent accidental overdriving of the subwoofer.

Refer to the on-screen DSP menu for specific navigation and adjustment instructions.

6. Manutenção

• Limpeza: Use um pano macio e seco para limpar a parte externa do ampAmplificador. Não utilize produtos de limpeza líquidos ou aerossóis.
• Ventilação: Certifique-se de que as aberturas de ventilação no amplifier are not blocked. Dust accumulation can be removed with a soft brush or vacuum cleaner.
• Conexões: Verifique periodicamente todas as conexões de cabos para garantir que estejam seguras e livres de corrosão.

7. Solução De Problemas

8. Especificações

9. Garantia e Suporte

9.1 Informações de garantia

OSD Audio products are designed and manufactured to the highest quality standards. For specific warranty details regarding your SMP500DSP amplifier, please refer to the warranty card included with your product or visit the official OSD Audio website.

Generally, OSD Audio provides a limited warranty against defects in materials and workmanship under normal use. This warranty typically covers parts and labor for a specified period from the original date of purchase.

9.2 Suporte ao cliente

If you encounter any issues or have questions regarding your OSD Audio SMP500DSP amplifier that are not covered in this manual, please contact OSD Audio customer support:

• Website: www.osdaudio.com
• Informações de contato: Consulte a seção "Fale Conosco" no site oficial. webSite com números de telefone e suporte por e-mail.

When contacting support, please have your product model number (SMP500DSP) and purchase information ready.