HILTI 282140 Side Handle Instruction Manual for DC 125-S/AG 125-S/SE Tools

1. Produto acabadoview

This manual provides essential information for the safe and effective use of the HILTI 282140 Side Handle. This accessory is designed to enhance control and stability when operating compatible HILTI DC 125-S, AG 125-S, and SE series cutting, sawing, and grinding tools. Proper installation and use are crucial for operator safety and optimal tool performance.

Figura 1: HILTI 282140 Side Handle. This image shows the metallic side handle, designed for ergonomic grip and secure attachment to HILTI power tools.

2. Instruções de segurança

Always adhere to the safety guidelines provided in the main instruction manual of your HILTI power tool (DC 125-S, AG 125-S, or SE). The side handle is an accessory and does not replace the need for general power tool safety practices.

Leia todas as instruções: Before using the side handle, read and understand all instructions in this manual and the power tool's manual.
Secure attachment: Ensure the side handle is securely fastened to the tool before operation. A loose handle can lead to loss of control and injury.
Mantenha uma pegada firme: Always maintain a firm, two-handed grip on the power tool, utilizing the side handle for maximum control.
Inspecione antes de usar: Before each use, inspect the side handle for any damage, cracks, or wear. Do not use a damaged handle.
Mantenha as mãos afastadas: Ensure hands are kept clear of rotating or moving parts of the power tool during operation.

3. Conteúdo da embalagem

Verifique se todos os componentes estão presentes ao desembalar:

HILTI 282140 Side Handle (1 unit)

4. Configuração e instalação

The HILTI 282140 Side Handle is designed for easy attachment to compatible HILTI power tools.

Identify the mounting point: Locate the threaded mounting hole on the side of your HILTI DC 125-S, AG 125-S, or SE tool. This is typically near the gear housing.
Thread the handle: Align the threaded end of the side handle with the mounting hole. Carefully thread the handle into the hole by turning it clockwise.
Tighten securely: Hand-tighten the side handle firmly until it is secure. Do not overtighten, but ensure there is no play or looseness. The handle should be stable and not rotate freely.
Check position: Adjust the handle's angle if necessary to achieve a comfortable and secure grip for your intended application. Ensure it does not obstruct ventilation or operational controls.

Observação: Always ensure the power tool is disconnected from its power source before attaching or detaching the side handle.

5. Instruções de operação

The side handle provides an additional point of contact for improved control and reduced operator fatigue during cutting, sawing, and grinding tasks.

Operação com duas mãos: Always operate the power tool with both hands, one on the main grip and the other firmly on the HILTI 282140 Side Handle.
Manter o equilíbrio: Use the side handle to maintain balance and apply even pressure during operation, especially when working on uneven surfaces or in awkward positions.
Control kickback: A firm grip on the side handle can help mitigate the effects of kickback, providing better control over the tool.
Ergonomia: Position the side handle to allow for a natural and comfortable wrist position, reducing strain during prolonged use.

6. Manutenção

Regular maintenance ensures the longevity and safe operation of your HILTI 282140 Side Handle.

Limpeza: Limpe a alça com um pano.amp cloth after each use to remove dust, debris, and grime. Avoid using harsh chemicals or solvents that could damage the material.
Inspeção: Periodically inspect the handle for any signs of wear, cracks, deformation, or damage to the threads.
Armazenar: Store the side handle in a clean, dry place, away from direct sunlight and extreme temperatures, when not in use.

7. Solução De Problemas

If you encounter issues with your HILTI 282140 Side Handle, refer to the following common problems and solutions:

Problema	Possível causa	Solução
Side handle feels loose or wobbly.	Handle not tightened sufficiently.	Ensure the handle is securely hand-tightened into the tool's mounting point.
Handle cannot be threaded into the tool.	Incorrect alignment or damaged threads.	Check for proper alignment. Inspect threads on both the handle and the tool for damage. Do not force. If threads are damaged, contact HILTI service.
Desconforto durante o uso.	Improper handle position.	Adjust the handle's angle to a more ergonomic position that suits your grip and task.

8. Especificações

Número do modelo: 282140
Marca: HILTI
Material: Metal, Aço inoxidável
Peso do item: Aproximadamente 7 onças (198 gramas)
Posicionamento da alça/alavanca: Lado
Usos específicos: Tool Handle for cutting, sawing, grinding applications
Compatibilidade: HILTI DC 125-S, AG 125-S, SE series tools

9. Garantia e Suporte

HILTI products are manufactured to the highest quality standards. For information regarding warranty coverage, service, or technical support for your HILTI 282140 Side Handle or compatible HILTI tools, please refer to the official HILTI webou entre em contato com o representante local da HILTI.

HILTI Customer Service: Por favor visite www.hilti.com Para obter informações de contato e recursos de apoio em sua região.

	Capuz de corte Hilti DC-EX 125/5"M - Instruções de operação Official operating instructions for the Hilti DC-EX 125/5"M slitting hood. This accessory is designed for professional use with angle grinders for cutting and slitting mineral materials like masonry, integrating with dust extractors for efficient operation.
	Instruções de operação da rebarbadora Hilti DCG 125-S/DAG 125-S/DAG 125-SE Manual de instruções e guia de segurança oficiais para as esmerilhadeiras angulares Hilti DCG 125-S, DAG 125-S e DAG 125-SE. Abrange uso, segurança, manutenção, solução de problemas e especificações técnicas.
	HILTI AG 500-11S 05 Operating Instructions Operating instructions and safety manual for the HILTI AG 500-11S 05 angle grinder, covering safe handling, proper usage, maintenance, and technical specifications for professional use.
	Manual de Instruções e Segurança da Esmerilhadeira Angular Hilti AG 125-19SE Comprehensive operating instructions and safety manual for the Hilti AG 125-19SE angle grinder. This document provides essential safety guidelines, operational procedures, maintenance advice, technical specifications, and troubleshooting information for professional use.
	Esmerilhadeira angular sem fio HILTI AG 6D-22-125: Instruções de operação e guia de segurança Instruções de operação detalhadas e diretrizes de segurança abrangentes para a esmerilhadeira angular sem fio HILTI AG 6D-22-125. Este manual foi desenvolvido para usuários profissionais e aborda as características do produto, seu uso e manutenção.
	Serra de parede elétrica Hilti DST 20-CA: Instruções de operação originais Este documento fornece instruções de operação completas para a serra de parede elétrica Hilti DST 20-CA. Ele detalha precauções de segurança, procedimentos de montagem, diretrizes operacionais, especificações técnicas e requisitos de manutenção para usuários profissionais.

HILTI 282140