Sonda LED Custom Dynamics PB-45-C com feixe de luzampManual do usuário
Model: PB-45-C
1. Introdução
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Custom Dynamics PB-45-C 4.5in. Probeam LED Passing Lamps. These modern LED passing lamps are designed to enhance visibility and safety for your motorcycle.
2. Produto acabadoview
The Custom Dynamics PB-45-C Probeam LED Passing Lamps feature a modern design with high lumen output for superior illumination. They are engineered for plug-and-play installation on most models.
Principais características:
- Modern LED passing lamp projeto
- Produção de 500 lúmens
- Instalação plug and play
- Construção à prova d'água
Figure 2.1: Custom Dynamics PB-45-C Probeam LED Passing Lamps. Esses euamps feature a sleek, round design with a chrome finish and clear lens, showcasing the internal LED components.
3. Informações de segurança
AVISO: Este produto pode expô-lo a produtos químicos, incluindo chumbo, que é conhecido no estado da Califórnia por causar câncer e defeitos congênitos ou outros danos reprodutivos. Para obter mais informações, acesse www.P65Warnings.ca.gov.
Always ensure the vehicle's power is disconnected before installation. Consult a qualified technician if you are unsure about any installation steps. Wear appropriate safety gear during installation.
4. Configuração e instalação
The PB-45-C lamps are designed for plug-and-play installation. Follow these general steps for installation:
- Ensure the motorcycle's ignition is off and the battery is disconnected to prevent electrical shorts.
- Carefully remove the existing passing lamps from your motorcycle, if applicable.
- Connect the Custom Dynamics PB-45-C lamps to the motorcycle's wiring harness. For models manufactured before 2004, an adapter (part number 2001-1266) is required and sold separately.
- Securely mount the new LED passing lamps in the designated locations.
- Reconnect the battery and test the functionality of the new lamps.
- Ajuste o lamp angle for optimal beam pattern and visibility.
For detailed vehicle-specific instructions, refer to your motorcycle's service manual.
5. Operação
Once installed, the Probeam LED Passing Lamps operate in conjunction with your motorcycle's existing lighting system. They are designed to provide additional forward and side illumination, enhancing your visibility to other road users and improving your view da estrada.
- Turn on your motorcycle's ignition and headlight switch to activate the passing lamps.
- Garanta que ambos lamps illuminate correctly.
- Periodically check the alignment of the lamps to ensure they are providing optimal light distribution without blinding oncoming traffic.
6. Manutenção
The Custom Dynamics PB-45-C LED Passing Lamps require minimal maintenance due to their durable LED technology and waterproof design.
- Limpeza: Limpe a lente com um pano macio e damp cloth and mild soap. Avoid abrasive cleaners or solvents that could damage the lens or housing.
- Inspeção: Periodically inspect the wiring and connections for any signs of wear, corrosion, or damage. Ensure mounting hardware remains secure.
- Selo à prova d'água: Do not attempt to open the sealed lamp housing, as this will compromise its waterproof integrity and void the warranty.
7. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Lamps do not illuminate | Loose connection, blown fuse, incorrect wiring, or adapter needed. | Check all connections, inspect vehicle's fuse box, verify wiring against motorcycle's diagram, ensure adapter 2001-1266 is used for pre-'04 models. |
| Um lamp não está funcionando | l com defeitoamp, loose connection to one lamp. | Check connection to the non-working lamp. If still not working, contact Custom Dynamics support. |
| Cintilando lamps | Fonte de alimentação instável, conexão frouxa. | Garantir vol estáveltage from the motorcycle's electrical system. Check all connections for tightness. |
8. Especificações
| Atributo | Detalhe |
|---|---|
| Marca | Dinâmica Personalizada |
| Número do modelo | PB-45-C |
| Lamp Tamanho | 4.5 polegadas |
| Saída de luz | 500 lúmens |
| Cor | Cromo |
| Cor da lente | Claro |
| Recurso especial | Impermeável |
| Peso do item | 2.85 libras |
| UPC | 644978551043 |
9. Garantia e Suporte
For warranty information and technical support, please contact Custom Dynamics directly. Refer to their official webConsulte o site ou a embalagem do produto para obter as informações de contato e a política de garantia mais recentes.
Website: www.customdynamics.com
