Globe Electric Wireless Plug-In Doorbell Kit - Model 18000083

1. Introdução

This manual provides instructions for the installation, operation, and maintenance of your Globe Electric Wireless Plug-In Doorbell Kit, Model 18000083. This kit includes one wireless chime unit and one wireless push button, designed to provide a convenient and reliable doorbell solution for your home. The chime unit offers three selectable tunes for the front entrance and a distinct ding for a secondary entrance.

Figura 1: The Globe Electric Wireless Plug-In Doorbell Kit, featuring the main chime unit and the compact wireless push button. The chime unit is designed to plug directly into a standard wall outlet, and the push button is suitable for wall mounting.

2. Informações de segurança

• Leia todas as instruções cuidadosamente antes da instalação e operação.
• Do not expose the push button to extreme temperatures, direct sunlight, or heavy rain for prolonged periods.
• Ensure the chime unit is plugged into a standard, easily accessible wall socket.
• Do not attempt to disassemble or repair the units yourself. Refer to qualified service personnel.
• Keep batteries (for push button) out of reach of children. Dispose of used batteries properly.

3. Conteúdo da embalagem

Verifique se todos os componentes estão presentes na embalagem:

• 1 x Wireless Chime Unit
• 1 x Botão de pressão sem fio
• Parafusos de montagem
• Fita de Montagem
• Âncoras

4. Configuração

4.1. Instalação do botão de pressão

1. Selecione o local: Choose a suitable location for the push button, typically near your front door. Ensure the surface is clean and dry. The transmission range is up to 150 ft (45 meters) from the chime unit.
2. Instale a bateria: The push button requires a battery (not included). Open the push button casing (usually by prying open a small notch or unscrewing a cover) and insert the correct battery type, observing polarity. Close the casing com segurança.
3. Opções de montagem:
   • Using Mounting Tape: For a quick installation, apply the provided mounting tape to the back of the push button and firmly press it onto the desired surface for at least 30 seconds.
   • Utilizando parafusos e buchas: For a more secure installation, mark the desired screw holes on the wall. Drill pilot holes if necessary, insert the anchors, and then secure the push button with the provided screws.

4.2. Plugging in the Chime Unit

• Plug the wireless chime unit into any standard indoor wall socket. Ensure it is within the 150 ft (45 meters) transmission range of the push button.
• Avoid plugging the chime unit into an outlet controlled by a switch, as this may inadvertently turn off the doorbell.

4.3. Pairing (If Applicable)

Your Globe Electric Wireless Doorbell Kit is typically pre-paired at the factory. If the chime does not sound when the push button is pressed after installation, follow these steps to re-pair the units:

1. Plug in the chime unit.
2. Locate the pairing button on the chime unit (refer to the diagram if available, or look for a small button often labeled "Pair" or "Learn"). Press and hold this button for approximately 3-5 seconds until an indicator light flashes or a short tone is heard.
3. Within 10 seconds, press the wireless push button. The chime unit should sound, indicating successful pairing.
4. Se o emparelhamento falhar, repita os passos.

5. Instruções de operação

5.1. Selecting Chime Tunes

The chime unit offers three selectable tunes for the front entrance and a distinct "ding" for a secondary entrance (if a second push button is paired, though this kit includes only one). To change the tune for the primary push button:

• Locate the tune selection button on the chime unit (often labeled with a musical note or "Tune").
• Press this button repeatedly to cycle through the available melodies. The chime will play each tune as you select it.
• Stop pressing the button when you hear your desired tune. This tune will now be set for the paired push button.

5.2. Faixa de transmissão

The wireless doorbell system has a transmission range of up to 150 feet (approximately 45 meters) in open areas. Environmental factors such as thick walls, metal structures, or other wireless devices may reduce this range. Position the chime unit and push button to minimize obstructions for optimal performance.

6. Manutenção

6.1. Battery Replacement (Push Button)

When the push button's performance degrades (e.g., reduced range, inconsistent ringing), the battery may need replacement. The push button uses a standard battery type (e.g., CR2032 coin cell or A23 12V, check the specific model for exact type).

1. Abra cuidadosamente o botão de pressão casing.
2. Remova a bateria velha e descarte-a de acordo com os regulamentos locais.
3. Insert a new battery of the same type, ensuring correct polarity (+ and -).
4. Feche o casing securely. Test the doorbell to confirm functionality.

6.2. Limpeza

Clean the chime unit and push button with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic finish.

7. Solução De Problemas

8. Especificações

9. Garantia e suporte

9.1. Informações de garantia

This Globe Electric Wireless Plug-In Doorbell Kit, Model 18000083, comes with a Garantia de 1 anos A garantia é válida a partir da data da compra. Esta garantia cobre defeitos de materiais e de fabricação sob uso normal. Não cobre danos resultantes de uso indevido, acidentes, modificações não autorizadas ou instalação inadequada.

Guarde o comprovante de compra para reclamações de garantia.

9.2. Suporte ao cliente

For technical assistance, troubleshooting, or warranty inquiries, please contact Globe Electric customer support. Refer to the product packaging or the official Globe Electric webAcesse o site para obter as informações de contato mais recentes (número de telefone, e-mail ou portal de suporte).

Ao entrar em contato com o suporte, tenha em mãos o número do modelo do seu produto (18000083) e o comprovante de compra.