Introdução
This manual provides comprehensive instructions for the safe and efficient use of your Paulmann MaxLED 79797 RGBW Controller. This device allows you to control Paulmann MaxLED RGBW light strips, enabling functions such as switching, dimming, and changing light colors and effects via the included wireless remote control. The controller operates without requiring direct line-of-sight to the remote, offering a range of up to 30 meters.
Instruções importantes de segurança
- Leia todas as instruções cuidadosamente antes da instalação e operação.
- Guarde este manual para referência futura.
- Este produto foi projetado apenas para uso interno (classificação IP20). Não o exponha à umidade ou a temperaturas extremas.
- Certifique-se de que a fonte de alimentação esteja desconectada antes de qualquer trabalho de instalação ou manutenção.
- Only use with Paulmann MaxLED RGBW strips and compatible 24V power supplies.
- Do not attempt to open or modify the controller or remote control. This will void the warranty.
- Mantenha as pilhas fora do alcance de crianças. Descarte as pilhas usadas de forma responsável.
Conteúdo da embalagem
Verifique se todos os componentes estão presentes na embalagem:
- 1x Paulmann MaxLED RGBW Controller (Model 79797)
- 1x Controle Remoto Sem Fio
- 1x Assembly Instructions (this manual)
Image: The MaxLED RGBW Controller and its wireless remote control. The controller is a small white rectangular unit with a cable, and the remote is an oval-shaped white device with various buttons and a color wheel.
Image: Diagram showing the MaxLED RGBW Controller and remote control with their approximate dimensions. The controller measures 22.5x85x45mm and the remote 20x110x53mm. A 150mm cable connects the controller to the LED strip.
Configuração e instalação
Follow these steps for proper installation of your MaxLED RGBW Controller:
- Prepare a área de instalação: Ensure the surface where the LED strip will be mounted is clean, dry, and free of dust.
- Conecte a tira de LED: Connect your Paulmann MaxLED RGBW strip to the output cable of the controller. The system uses an easy plug-in connection. Ensure the connectors are securely fastened.
- Conecte a fonte de alimentação: Connect a compatible 24V Paulmann power supply (not included) to the input side of the MaxLED RGBW Controller.
- Monte o controlador: The controller is designed for hidden installation. Place it in a discreet location where it is protected from physical damage and moisture, but still allows for proper signal transmission from the remote (up to 30m range).
- Ligar: Once all connections are secure, plug the power supply into a suitable electrical outlet.
- Pairing the Remote Control (if necessary): The remote control is usually pre-paired. If not, refer to the "Operating Instructions" section for pairing procedures.
Image: This image illustrates the MaxLED expandable component system, highlighting three key aspects: "Easy to connect" (showing a hand connecting an LED strip), "Easy to mount" (showing an LED strip being applied to a surface), and "Easy to control" (showing the remote control). This demonstrates the simplicity of the setup process.
Instruções de operação
The wireless remote control allows full command over your MaxLED RGBW strips.
Funções do controle remoto:
Imagem: Uma imagem detalhada view of the MaxLED RGBW remote control, showing its various buttons and the central color wheel. The remote features power, brightness, mode, speed, and color selection controls.
- Botão de energia (O): Press to turn the LED strips On or Off.
- Controle de brilho (B +/-): Use the '+' button to increase brightness and '-' to decrease brightness.
- Roda de cores: Touch the color wheel to select a desired static color for your LED strips.
- Mode Selection (M): Cycle through various pre-programmed light effects and color changing modes.
- Controle de velocidade (S +/-): When in a dynamic mode, use the '+' button to increase the speed of the effect and '-' to decrease it.
Emparelhando o controle remoto:
If your remote control is not responding, it may need to be paired with the controller:
- Certifique-se de que o controlador esteja ligado.
- Within 3 seconds of powering on the controller, press and hold the "Mode" (M) button on the remote control for a few seconds.
- The LED strips should flash to indicate successful pairing.
Manutenção
Limpeza:
To clean the controller and remote control, gently wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the components.
Substituição da bateria do controle remoto:
The remote control requires batteries (type not specified in product data, typically CR2032 or similar button cell). If the remote's range decreases or it stops responding, replace the battery:
- Localize o compartimento da bateria na parte traseira do controle remoto.
- Open the compartment using a small screwdriver or by sliding the cover.
- Remova a bateria antiga e insira uma nova, certificando-se da polaridade correta (+/-).
- Feche o compartimento da bateria com segurança.
- Descarte a bateria antiga de acordo com os regulamentos locais.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| LED strips do not light up. | No power, loose connection, faulty power supply, remote not paired. | Check power supply connection. Ensure all cables are securely plugged in. Verify power outlet is functional. Re-pair the remote control (see Operating Instructions). |
| O controle remoto não responde. | Dead battery, remote not paired, out of range. | Replace remote control battery. Re-pair the remote control. Move closer to the controller (within 30m). |
| As cores estão incorretas ou inconsistentes. | Loose connection to LED strip, faulty LED strip. | Check the connection between the controller and the LED strip. Ensure the strip is fully compatible. |
| Dimming or effects not working. | Remote control issue, incompatible LED strip. | Ensure the remote control battery is good and it is paired. Verify the LED strip is an RGBW dimmable type. |
Especificações
| Marca | Paulman |
| Número do modelo | 79797 |
| Dimensões do produto (C x L x A) | 5.3 x 11 x 2 cm (Controller); 20 x 110 x 53 mm (Remote) |
| Peso | 102 gramas |
| Classificação IP | IP20 (somente para uso interno) |
| Material | Plástico |
| Máx. Wattage | 144 Watts |
| Volumetage | 24 Volts |
| Tipo de fonte de luz | LED (for compatible strips) |
| Fonte de energia | AC (via external 24V power supply) |
| Características especiais | Dimmable, Variable Intensity, Remote Control, RGBW Color Change |
| Frequência de controle remoto | RF de 2.4 GHz |
| Alcance do controle remoto | Up to 30 meters (non-line-of-sight) |
| Pilhas necessárias (controle remoto) | Sim (não incluído) |
Image: The MaxLED RGBW Controller and its remote control, emphasizing the 2.4 GHz RF wireless technology for reliable communication.
Garantia e Suporte
Garantia:
Paulmann offers a 1-year availability for spare parts for this product. For specific warranty terms and conditions, please refer to the official Paulmann website ou entre em contato com seu revendedor.
Suporte ao cliente:
For further assistance, technical support, or inquiries regarding your Paulmann MaxLED RGBW Controller, please visit the official Paulmann website or contact their customer service department. Contact information can typically be found on the product packaging or the Paulmann website.
Paulman Website: www.paulmann.com
