Kettler Track S2 Treadmill User Manual

1. Introdução

Welcome to the Kettler Track S2 Treadmill user manual. This guide provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new treadmill. Please read this manual thoroughly before using the equipment to ensure proper function and longevity of your product. Retain this manual for future reference.

Figure 1: Kettler Track S2 Treadmill in operational position.

2. Instruções de segurança

To prevent injury and ensure safe operation, observe the following safety precautions:

• Consulte um médico antes de iniciar qualquer programa de exercícios.
• Ensure the treadmill is placed on a flat, stable surface with adequate clear space around it (at least 2 meters behind and 0.6 meters on each side).
• Always wear appropriate athletic footwear and clothing.
• Familiarize yourself with the emergency stop function before beginning your workout.
• Mantenha crianças e animais de estimação longe da esteira durante a operação.
• Connect the treadmill to a properly grounded electrical outlet. Do not use extension cords.
• Inspect the treadmill for loose parts or wear before each use. Do not operate if damaged.
• Não tente realizar reparos na esteira além das instruções de manutenção fornecidas neste manual. Para reparos, entre em contato com pessoal de serviço qualificado.

3. Montagem

The Kettler Track S2 Treadmill requires assembly. It is recommended that two people perform the assembly process for safety and ease. All necessary tools and hardware are typically included.

3.1 Componentes incluídos

• 1 x Motorised Treadmill (main frame, running deck, console, uprights, and associated hardware).

3.2 Etapas de Montagem (Guia Geral)

1. Carefully unpack all components and verify against the parts list in your separate assembly guide.
2. Attach the uprights to the main base frame, ensuring all cables are routed correctly and not pinched.
3. Mount the console onto the uprights, connecting all electrical cables securely.
4. Secure all bolts and fasteners according to the specific instructions provided in your assembly manual. Do not overtighten.
5. Perform a final check to ensure all connections are tight and the treadmill is stable.

Figure 2: Kettler Track S2 Treadmill in folded position, illustrating its compact storage capability.

4. Instruções de operação

This section outlines the basic operation of your Kettler Track S2 Treadmill.

4.1 Ligar e desligar

• Para ligar: Plug the power cord into a grounded outlet and flip the main power switch (usually located near the front of the treadmill base) to the 'ON' position. The LCD display will illuminate.
• Para desligar: Flip the main power switch to the 'OFF' position and unplug the power cord from the outlet.

4.2 Using the Control Console

Figure 3: Kettler Track S2 Treadmill control console with LCD display.

• Tela LCD: The LCD screen displays workout data such as speed, time, distance, calories burned, and heart rate (if applicable).
• Botões Iniciar/Parar: Press 'START' to begin your workout. Press 'STOP' to pause or end your workout.
• Ajuste de velocidade: Use the '+' and '-' buttons to adjust the running speed. The maximum speed is 20 Kilometers per Hour. Quick speed buttons may also be available for instant speed changes.
• Ajuste de inclinação: If your model includes incline, use the incline '+' and '-' buttons to adjust the gradient of the running deck.
• Seleção de programas: Use the 'PROGRAM' button to cycle through pre-set workout programs. Refer to the console guide for details on each program.
• Parada de emergência: The safety key must be attached to the console and clipped to your clothing. If the safety key is pulled, the treadmill will stop immediately.

Figure 4: Close-up of the Kettler Track S2 Treadmill's running deck, featuring the ENERGY DECK cushioning.

5. Manutenção

A manutenção regular garante a longevidade e o funcionamento seguro da sua esteira.

• Limpeza: Limpe a esteira após cada uso com um pano umedecido.amp Use um pano para remover o suor e a poeira. Evite produtos de limpeza abrasivos.
• Lubrificação: The running belt may require periodic lubrication. Refer to your specific product manual for the recommended type of lubricant and frequency.
• Tensão e alinhamento da correia: Check the running belt tension and alignment regularly. Adjust as needed following the instructions in your detailed manual. An overly loose or tight belt can affect performance and safety.
• Verificações de parafusos: Verifique periodicamente todos os parafusos e fixadores para garantir que estejam apertados. Reaperte-os, se necessário.
• Tampa do motor: Keep the motor cover free from dust and debris to ensure proper ventilation.

6. Solução De Problemas

If you encounter issues with your Kettler Track S2 Treadmill, refer to the following common troubleshooting tips:

For issues not listed here or if solutions do not resolve the problem, please contact KETTLER customer support.

7. Especificações

Key technical specifications for the Kettler Track S2 Treadmill:

• Marca: CHEIRO
• Modelo: Track S2
• Cor: Preto
• Grau do produto: Lar
• Peso do item: 84 kg
• Material: Etileno Vinil Acetato
• Velocidade máxima: 20 quilômetros por hora
• Recurso especial: Portátil
• Público-alvo: Adulto, Jovem
• Potência Máxima: 2 cavalos de potência
• Montagem necessária: Sim
• Tipo de exibição: LCD
• Componentes incluídos: 1 x Motorised Treadmill
• Dimensões do item (CxLxA): 2.3 x 0.99 x 0.4 metros
• País de origem: China

8. Garantia e Suporte

For detailed warranty information, terms, and conditions, please refer to the warranty card or documentation included with your Kettler Track S2 Treadmill purchase. In case of technical issues, service requests, or questions not covered in this manual, please contact KETTLER customer service or the authorized dealer from whom you purchased the product. Ensure you have your proof of purchase and product model information readily available when contacting support.