Introdução
This manual provides detailed instructions for the installation and proper use of the Phanteks PH-VGPUKT_02 Universal Vertical GPU Bracket with its included 220mm Flat Line PCI-E x16 Riser Cable. This kit is designed to allow vertical mounting of your graphics card, enhancing the aesthetic appeal of your PC build while maintaining optimal performance.
The bracket is constructed from powder-coated steel, ensuring durability and stability for your graphics card. The included riser cable supports PCI-E 3.0/2.0/1.0, making it compatible with a wide range of systems. Please read all instructions carefully before proceeding with installation.
Conteúdo da embalagem
Verifique se todos os componentes estão presentes no seu pacote:
- Universal Vertical GPU Bracket
- 220mm Flat Line PCI-E x16 Riser Cable
- Parafusos e acessórios de montagem
- Adhesive Pads (for additional support/protection)
Image: All components included in the Phanteks PH-VGPUKT_02 kit.
Image: Product packaging for the Phanteks PH-VGPUKT_02.
Configuração e instalação
The Phanteks PH-VGPUKT_02 is designed for chassis with an “open” PCI slot design, requiring 7+ available PCI slots. Some chassis may require modification for proper fitment.
Instalação passo a passo:
- Prepare the Bracket: Attach the necessary mounting slides to the vertical GPU bracket using the provided screws. Do not overtighten, allowing for slight adjustments.
- Install the Riser Cable: Secure the 220mm Flat Line PCI-E x16 Riser Cable to the bracket using the appropriate screws. Ensure the cable is firmly attached.
- Mount the Bracket in Chassis: Carefully position the assembled bracket and riser cable into your PC chassis. The bracket should align with the 7+ open PCI slots. Secure the bracket to the chassis using the provided screws.
- Instale a placa gráfica: Insert your dual-slot graphics card into the PCI-E slot on the riser cable. Secure the graphics card to the bracket using its mounting screws.
- Conectar à placa-mãe: Connect the other end of the 220mm riser cable to the appropriate PCI-E x16 slot on your motherboard. Ensure a secure connection.
- Ajustes Finais: Make any necessary horizontal or side panel adjustments to achieve the desired fit and aesthetic. If desired, apply the adhesive pads to the bottom of the bracket for added stability and to prevent scratching.
Video: This video demonstrates the initial assembly of a graphics card bracket, showing how to attach the mounting slides and secure them with screws. It highlights the importance of not overtightening to allow for future adjustments.
Image: Close-up of the 220mm Flat Line PCI-E x16 Riser Cable.
Imagem: Lado view of the vertical GPU bracket.
Image: Graphics card mounted vertically on the bracket (side view).
Image: PCI-E connector of the riser cable.
Image: Included adhesive pads.
Considerações operacionais
Once installed, the vertical GPU bracket and riser cable operate seamlessly with your system. Ensure all connections are firm to prevent signal loss or instability.
PCI-E Version Compatibility:
The included riser cable supports PCI-E 3.0/2.0/1.0. If you are using a PCI-E 4.0 graphics card, it is crucial to change the PCI-E slot setting in your BIOS to Gen3/PCI-E 3.0 antes installing the GPU. Failure to do so may result in compatibility issues or system instability.
Video: This video demonstrates a PCI-E 5.0 bandwidth test using a 90 cm riser cable, illustrating the performance capabilities of high-speed riser cables.
Manutenção
Regular maintenance of your PC components, including the vertical GPU bracket and riser cable, can help ensure longevity and optimal performance.
- Remoção de poeira: Periodically clean any dust accumulation on the bracket and around the graphics card to maintain proper airflow and cooling.
- Verificação de conexão: Ensure all cable connections remain secure over time.
- Inspeção física: Check the bracket and riser cable for any signs of wear or damage.
Solução de problemas
If you encounter issues after installing the vertical GPU bracket and riser cable, consider the following:
- No Display/System Instability with PCI-E 4.0 GPU: If your graphics card is PCI-E 4.0 compatible, ensure you have set the PCI-E slot in your motherboard's BIOS to Gen3/PCI-E 3.0. This is a common requirement for PCI-E 3.0 riser cables when used with newer GPUs.
- Graphics Card Not Detected: Double-check all connections, especially the riser cable to both the motherboard and the graphics card. Ensure the graphics card is fully seated in the riser's slot.
- Problemas de aptidão física: If the bracket does not fit perfectly, remember that some chassis modifications might be required, especially for cases not explicitly designed for vertical GPU mounting.
Especificações
| Recurso | Detalhe |
|---|---|
| Marca | Fantasmas |
| Número do modelo | PH-VGPUKT_02 |
| Riser Cable Length | 220 mm |
| PCI-E Version Support | PCI-E 3.0/2.0/1.0 (Requires BIOS setting for PCI-E 4.0 GPUs) |
| PCI Slot Requirement | 7+ open PCI slots |
| Suporte GPU | Dual Slot GPU |
| Material | Aço revestido a pó |
| Peso do item | 15.2 onças |
| Dimensões do produto | 9.5 x 6.5 x 6.5 polegadas |
Garantia e Suporte
For warranty information and technical support, please refer to the documentation included with your product packaging or visit the official Phanteks website. Os termos e condições específicos da garantia podem variar conforme a região e o revendedor.
