Paulmann 92924

Manual de Instruções do Spot de Parede Embutido LED Paulmann 92924

1. Produto acabadoview

The Paulmann 92924 LED Recessed Wall Spot is designed for discreet wall installation, providing decorative lighting effects and enhancing safety in areas such as hallways or staircases. This round fixture integrates a 1.7-watt LED, emitting a warm white light at 2700 Kelvin, similar to traditional incandescent bulbs. Its compact design and energy-efficient LED technology make it suitable for various indoor applications.

Paulmann 92924 LED Recessed Wall Spot

Image 1.1: The Paulmann 92924 LED Recessed Wall Spot, a round white fixture with an oval light opening.

2. Instruções de segurança

  • Segurança elétrica: Installation must be performed by a qualified electrician or a person with appropriate electrical knowledge to prevent electric shock or fire hazards. Always disconnect power at the main circuit breaker before installation, maintenance, or repair.
  • Uso pretendido: This product is designed for indoor use only. Do not install in wet or damp localizações.
  • Altura de instalação: The maximum recommended installation height for this wall spot is 50 centimeters from the floor to ensure optimal lighting effect and safety.
  • LED integrado: The LED light source is permanently integrated into the fixture and cannot be replaced by the user. Do not attempt to open or modify the LED module.
  • Limpeza: Use um pano macio e seco para limpeza. Não use limpadores abrasivos ou solventes.

3. Conteúdo da embalagem

Verifique se todos os componentes estão presentes antes de iniciar a instalação:

  • 1x Paulmann 92924 LED Recessed Wall Spot (with integrated LED bulb)
  • Mounting instructions (this document)

4. Configuração e instalação

Follow these steps for proper installation of your Paulmann 92924 LED Recessed Wall Spot. Ensure power is disconnected before proceeding.

  1. Prepare o local de instalação: Choose a suitable wall location, ensuring it is within the recommended maximum height of 50 cm from the floor. A standard round electrical box (not included) is typically required for recessed installation.
  2. Conexão de fiação: Carefully connect the electrical wires from your mains supply to the terminals on the back of the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local electrical codes. Refer to Image 4.1 for a visual guide to the wiring box and fixture.
Wiring box and Paulmann 92924 fixture

Imagem 4.1: Um example of a green electrical wiring box with connected wires next to the Paulmann 92924 fixture, showing its rear connection points.

  1. Fixe o dispositivo: Once wired, carefully insert the fixture into the prepared electrical box in the wall. Ensure it sits flush and is securely fastened. Refer to Image 4.2 for a visual guide.
Hands installing Paulmann 92924 fixture into wall box

Image 4.2: Hands guiding the Paulmann 92924 fixture into a green electrical box recessed in a white wall, showing the connection process.

  1. Attach the Front Cover: Place the decorative front cover onto the main fixture body, ensuring it clicks into place or is securely attached as per the design. Refer to Image 4.3 for a visual guide.
Hands attaching front cover to Paulmann 92924 fixture

Image 4.3: Hands carefully positioning the white round front cover onto the Paulmann 92924 recessed fixture, completing the installation.

  1. Restaurar energia: Once installation is complete and all components are securely in place, restore power at the main circuit breaker.
Multiple Paulmann 92924 lights installed in a hallway

Image 4.4: Multiple Paulmann 92924 recessed wall spots illuminating a hallway, demonstrating the installed appearance and light distribution.

5. Instruções de operação

The Paulmann 92924 LED Recessed Wall Spot operates via your standard wall switch connected to the electrical circuit. There are no additional controls on the fixture itself.

  • Ligar/Desligar: Use o interruptor de parede para ligar ou desligar a luminária.

6. Manutenção

The Paulmann 92924 LED Recessed Wall Spot requires minimal maintenance.

  • Limpeza: To clean the fixture, ensure power is off. Use a soft, dry, lint-free cloth to gently wipe the surface. Avoid using liquid cleaners, sprays, or abrasive materials, as these can damage the finish or electrical components.
  • Tempo de vida do diodo emissor de luz: The integrated LED has an average lifespan of 30,000 hours. No bulb replacement is necessary or possible.

7. Solução De Problemas

If you encounter issues with your Paulmann 92924 LED Recessed Wall Spot, refer to the following common problems and solutions:

ProblemaPossível causaSolução
A luz não acende.Sem fonte de alimentação.Check the wall switch and circuit breaker. Ensure power is restored to the circuit.
A luz pisca ou está fraca.Conexão de fiação solta.WARNING: Disconnect power before checking connections. Verify that all electrical connections are secure. If unsure, consult a qualified electrician.
Fixture is hot to the touch.Normal operation (LEDs generate some heat).A slight warmth is normal. If it is excessively hot or emits a burning smell, immediately disconnect power and contact Paulmann support.

If the problem persists after attempting these solutions, please contact Paulmann customer support.

8. Especificações

MarcaPaulman
Número do modelo92924
Dimensões do produto (C x L x A)7.8 x 7.8 x 3.5 cm
Peso91 gramas
MaterialPlástico
CorBranco
EstiloTradicional
FormaRedondo
Número de lâmpadas1 (LED integrado)
Volumetage230 Volts
Usos específicosWall (Indoor)
Características especiaisBaixo consumo de energia
Tipo de instalaçãoRebaixado
Tipo de lâmpadaLIDERADO
Fluxo Luminoso107 lm
O quetage1.1 Watts (LED)
Equivalente incandescente12 Watts
Temperatura de cor2700 Kelvin (branco quente)
Expectativa de vida média30,000 horas
Classificação IPIP20

9. Garantia e Suporte

For warranty information or technical support regarding your Paulmann 92924 LED Recessed Wall Spot, please refer to the official Paulmann website or contact their customer service department directly. Details regarding specific warranty periods and terms are typically provided with the product packaging or on the manufacturer's website.

Paulmann is a brand committed to quality lighting solutions. For further assistance, please have your model number (92924) and purchase details ready when contacting support.

Documentos relacionados - 92924

Préview Paulmann 94504/94595 LED Ground Recessed Luminaire Smart Home Zigbee Installation Guide
Detailed installation and safety instructions for the Paulmann 94504/94595 LED ground recessed luminaire. Features Smart Home Zigbee 3.0 connectivity, IP67 rating, and 230V power. Includes multilingual guidance on installation, replaceability, and disposal.
Préview Paulmann LED Recessed Luminaire Installation and Safety Guide
Comprehensive guide for Paulmann LED recessed luminaires, covering installation, safety instructions, component replaceability, and energy efficiency information. Includes product numbers 934.39 through 934.45.
Préview Paulmann URail Track Spot Installation Guide - Model 976.13
Detailed installation instructions and safety information for the Paulmann URail track spot lighting system, model 976.13. Learn how to assemble and install your track lighting.
Préview Guia de Segurança e Instalação da Luminária de Embutir LED Paulmann 925.29/925.30
Instruções de segurança detalhadas e guia de instalação para as luminárias de embutir LED Paulmann 925.29 e 925.30. Inclui diagramas passo a passo e informações essenciais sobre a conexão elétrica.
Préview Guia de Instalação do Spot Individual de Piso Paulmann Plug & Shine IP67
Guia de instalação completo para a luminária LED Paulmann Plug & Shine Floor Individual Spot IP67, detalhando montagem, conexões elétricas, substituição de componentes e informações de segurança.
Préview Guia de instalação do refletor Paulmann Lanka
Instruções de instalação e diretrizes de segurança completas para o projetor Paulmann Lanka (Artigo nº 667.69). Abrange conexões elétricas, substituição de componentes e especificações técnicas para uso seguro e adequado.