Introdução
Este manual fornece instruções completas para a instalação, operação e manutenção da sua câmera de maçaneta traseira iBeam by Metra TEDGH para Ram. Esta câmera de maçaneta traseira, que substitui a original de fábrica, foi projetada para melhorar a visibilidade da parte traseira do seu veículo, oferecendo uma imagem nítida. view for safer maneuvering and parking.
Produto acimaview
The iBeam TEDGH camera integrates seamlessly into your Ram truck's tailgate handle, providing a discreet and factory-like appearance. It features advanced imaging capabilities for both day and night use.
- Imagens de alta qualidade: Equipped with a 1/3 inch CMOS camera sensor for sharp and clear video output.
- Largo Viewângulo de entrada: Oferece um ângulo de 150 graus viewing angle to capture a broad perspective behind the vehicle.
- Visão noturna: Features 0.5 LUX night vision for improved visibility in low-light conditions.
- Defeatable Parking Lines: Includes on-screen parking guidelines that can be enabled or disabled as per user preference.
- Extended Harness: Comes with a 26-foot harness for flexible connection to an aftermarket radio or display (not included).
O que está na caixa
Ao abrir a embalagem do produto, verifique se todos os seguintes componentes estão presentes:
- iBeam TEDGH Ram Tailgate Handle Camera unit
- 26-foot extension cable harness
- Manual do usuário (este documento)
Configuração e instalação
The iBeam TEDGH camera is designed for surface mount installation as a factory replacement tailgate handle. Professional installation is recommended.
Precauções de segurança
- Disconnect the vehicle's battery before beginning installation to prevent electrical shorts.
- Ensure all wiring is routed away from moving parts, heat sources, and sharp edges.
- Verifique se todas as conexões estão seguras e devidamente isoladas.
- This product is intended for use with a 12-volt DC power supply.
Etapas de instalação (Guia geral)
- Remove Existing Tailgate Handle: Carefully remove the original tailgate handle from your Ram truck. Refer to your vehicle's service manual for specific instructions.
- Install New Tailgate Handle Camera: Mount the iBeam TEDGH camera unit into the tailgate opening, ensuring it is securely fastened.
- Fiação de rota: Route the 26-foot extension cable from the camera through the tailgate and chassis to the location of your aftermarket radio or display. Ensure the cable is protected from damage.
- Conectar ao monitor: Connect the video output cable from the camera harness to the video input of your aftermarket radio or monitor.
- Conexão de energia: Connect the power wires of the camera harness to a suitable 12-volt power source, typically the vehicle's reverse light circuit, so the camera activates when the vehicle is in reverse.
- Funcionalidade de teste: Reconnect the vehicle's battery and test the camera's operation. Engage reverse gear and verify that the camera image appears on your display.
- Fiação segura: Once confirmed operational, secure all wiring with zip ties or electrical tape to prevent rattling or damage.
Figure 1: The iBeam TEDGH Ram Tailgate Handle Camera, showing the integrated camera lens on the left side of the handle and the attached wiring harness on the right.
Figura 2: Uma frente mais próxima view of the iBeam TEDGH Ram Tailgate Handle Camera, highlighting the camera lens and the handle mechanism.
Instruções de operação
The iBeam TEDGH camera operates automatically when the vehicle is placed into reverse gear, provided it is correctly wired to the reverse light circuit or a switched 12V source that activates with reverse.
- Ativação automática: When you shift your vehicle into reverse, the camera will automatically display the rear view on your connected aftermarket monitor.
- Linhas de estacionamento: The camera features integrated parking lines to assist with judging distance and alignment. These lines are defeatable, meaning they can be turned on or off. The method for defeating (enabling/disabling) parking lines typically involves cutting a specific wire loop on the camera harness during installation. Consult the wiring diagram provided with the product for exact instructions.
- Visão noturna: The 0.5 LUX night vision capability allows for clear visibility even in very low light conditions, enhancing safety during nighttime parking or maneuvering.
Manutenção
To ensure optimal performance and longevity of your iBeam TEDGH camera, follow these simple maintenance guidelines:
- Limpe a lente: Limpe regularmente a lente da câmera com um pano macio e seco.amp cloth to remove dirt, dust, and debris that may obstruct the view. Avoid abrasive cleaners or materials that could scratch the lens.
- Inspecionar a fiação: Periodically check the wiring and connections for any signs of wear, fraying, or corrosion. Ensure all connections remain secure.
- Evite a lavagem com jato de alta pressão: When washing your vehicle, avoid directing high-pressure water jets directly at the camera lens or housing, as this could potentially damage the seal or internal components.
Solução de problemas
If you encounter issues with your iBeam TEDGH camera, refer to the following common troubleshooting steps:
| Problema | Possível causa | Solução |
|---|---|---|
| Nenhuma imagem é exibida quando a marcha à ré está engatada. |
|
|
| A imagem está desfocada ou distorcida. |
|
|
| Parking lines are not visible or cannot be disabled. |
|
|
Especificações
| Recurso | Detalhe |
|---|---|
| Número do modelo | TEDGH |
| Tipo de sensor | CMOS 1/3 polegada |
| Resolução | 400 linhas de TV |
| ViewÂngulo de Injeção (Diagonal) | 168 graus |
| ViewÂngulo de Injeção (Horizontal) | 136 graus |
| ViewÂngulo de entrada (Vertical) | 100 graus |
| Iluminação Mínima | 0.5 LUX (Night Vision) |
| Linhas de estacionamento | Derrotável |
| Comprimento do cabo de extensão | 26 pés |
| Requisitos de energia | 12 Volts CC |
| Tipo de instalação | Montagem em superfície |
| Dimensões do produto | 11.7 x 5 x 4.75 polegadas |
| Peso do item | 1.56 libras |
| Dispositivos compatíveis | Monitor (Aftermarket Radio/Display) |
Informações de garantia
iBeam products are manufactured by Metra Electronics Corp. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Metra Electronics website. Guarde o comprovante de compra para solicitações de garantia.
Suporte ao cliente
Should you require further assistance, technical support, or have questions not covered in this manual, please contact Metra Electronics Corp. customer support. Contact information can typically be found on their official website ou na embalagem do produto.
Manufacturer: Metra Electronics Corp
