Strong SRT 8209

STRONG SRT 8209 DVB-T2 HD Receiver User Manual

Modelo: SRT 8209

1. Introdução

This manual provides detailed instructions for the installation, operation, and maintenance of your STRONG SRT 8209 DVB-T2 HD Digital Terrestrial Receiver. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your viewexperiência.

The SRT 8209 is a compact and efficient HD Digital Terrestrial Receiver, designed for easy installation and user-friendly operation. It supports HEVC/H.265 and Dolby Digital Plus standards, enabling reception of free-to-air channels with excellent sound and picture quality up to 1080p resolution. Key features include USB recording, timeshift, media playback, and an Electronic Program Guide (EPG).

Frente view of the STRONG SRT 8209 receiver, highlighting DVB-T2 and 10-bit support.

Figura 1.1: Frente view of the STRONG SRT 8209 DVB-T2 HD Receiver.

2. Conteúdo da caixa

Por favor, verifique a embalagem dos seguintes itens:

Retail packaging of the STRONG SRT 8209 Digital Terrestrial HD Receiver, showing key features.

Figure 2.1: Retail packaging of the STRONG SRT 8209 Digital Terrestrial HD Receiver.

3. Instruções de segurança

For safe and optimal operation, please observe the following:

4. Configuração

4.1 Conectando o Receptor

Follow these steps to connect your SRT 8209 receiver to your television and antenna:

  1. Conexão da antena: Conecte o cabo da sua antena terrestre ao ENTRADA RF porta no painel traseiro do receptor.
  2. Conexão de TV (HDMI): Para vídeo e áudio de alta definição, conecte um cabo HDMI da saída... HDMI Conecte a porta do receptor a uma entrada HDMI da sua televisão.
  3. TV Connection (SCART/Péritel): If your TV does not have an HDMI port, use a SCART cable to connect the TV SCART Conecte a porta SCART do receptor à entrada SCART da sua televisão.
  4. Conexão do sistema de áudio (opcional): For enhanced audio, connect an audio amplifier or soundbar to the Digital Audio S/PDIF (Coaxial) saída.
  5. Conexão de rede (opcional): Conecte um cabo Ethernet ao Rede local port for RSS feeds and weather forecasts.
  6. Conexão de energia: Connect the power adapter to the receiver and then plug it into a wall outlet.
Rear panel of the STRONG SRT 8209 receiver, displaying all connection ports including RF IN, Coaxial, HDMI, LAN, and TV SCART.

Figure 4.1: Rear panel connections of the SRT 8209 receiver.

Rear panel of the STRONG SRT 8209 receiver with labels indicating connections for Antenna, Digital audio amplifier, TV (HDMI), TV (SCART), and Ethernet.

Figure 4.2: Labeled rear panel connections for easy identification.

4.2 Inicialização da alimentação e busca de canais

Upon first power-on, the receiver will guide you through the initial setup process:

  1. Turn on your TV and select the correct HDMI or SCART input.
  2. The receiver will display a setup wizard. Follow the on-screen prompts to select your language and country.
  3. The receiver will automatically begin scanning for available DVB-T2 channels. This process may take several minutes.
  4. Assim que a busca for concluída, o receptor salvará os canais e exibirá o primeiro canal disponível.

The SRT 8209 has a memory capacity for up to 400 channels.

5. Instruções de operação

5.1 Funções de controle remoto

The remote control allows full operation of your receiver. Insert the two AAA batteries provided into the remote control, observing polarity.

Infrared remote control for the STRONG SRT 8209 receiver, showing all buttons and functions.

Figure 5.1: SRT 8209 Remote Control.

As principais funções incluem:

5.2 Guia Eletrônico de Programação (EPG)

Pressione o EPG button on your remote control to view the Electronic Program Guide. The EPG provides information on current and upcoming programs for up to 7 days. You can also schedule recordings directly from the EPG.

5.3 USB Recording and Timeshift

The SRT 8209 supports recording and timeshift functions via its USB 2.0 port. Connect a USB storage device (e.g., USB flash drive or external hard drive) to the USB port on the front panel.

Observação: The USB port is inactive in standby mode to conserve energy.

The SRT 8209 receiver connected to a TV displaying a collage of various images, illustrating media playback via USB.

Figure 5.2: Media playback via USB.

5.4 Network Features (Ethernet)

Connect the receiver to your home network via the Ethernet port to access additional features such as RSS feeds and weather forecasts.

A hand holding the remote control, pointing towards a TV screen displaying a weather forecast, with the SRT 8209 receiver visible.

Figure 5.3: Weather forecast display via Ethernet connection.

6. Manutenção

6.1 Limpeza

To clean the receiver, unplug it from the power outlet. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.

6.2 Atualizações de Software

Verifique periodicamente as instruções do fabricante. website for available software updates. Updates can be installed via the USB port as described in section 5.3.

7. Solução De Problemas

If you encounter issues with your SRT 8209 receiver, refer to the following common problems and solutions:

Problema Possível causa Solução
Sem imagem ou som Incorrect TV input selected; loose cables; receiver not powered on. Select the correct HDMI/SCART input on your TV. Check all cable connections. Ensure the receiver is plugged in and powered on.
Mensagem "Sem sinal" Antenna not connected; poor antenna signal; incorrect channel scan. Check antenna connection. Adjust antenna position. Perform a new channel scan.
Controle remoto não funciona Dead batteries; obstructed sensor; incorrect remote mode. Replace batteries. Ensure no obstacles between remote and receiver. Point remote directly at the receiver.
problemas de gravação USB USB device not formatted correctly; insufficient storage; USB port inactive. Ensure USB device is formatted to FAT32 or NTFS. Check available storage. Ensure receiver is not in standby.

8. Especificações

Recurso Detalhe
Número do modelo SRT8209
Marca Forte
Sintonizador DVB-T2, HEVC/H.265 compatible
Resolução de vídeo 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Proporção da tela 4:3 Letterbox, 4:3 Pan & Scan, 16:9, Auto
Decodificação de áudio Dolby Digital Plus, Surround Sound 5.1
Conectores RF IN, Coaxial S/PDIF, HDMI, LAN (Ethernet), TV SCART, USB 2.0, 3.5mm Audio Jack
Memória do canal 400 canais
Timer Events 30 (Once, Daily, Weekly)
Fonte de energia 220 - 240 V AC, 50/60 Hz
Nível de sinal de entrada 20 ~ -82 dBm
Dimensões (L x P x A) 15 cm x 11 cm x 4 cm
Características especiais USB Recording, Timeshift, EPG, RSS Feeds, Weather Forecast, Power Saving (Auto Standby)

9. Garantia

The STRONG SRT 8209 DVB-T2 HD Receiver comes with a Garantia de 2 ano from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

10. Suporte

For further assistance, technical support, or information regarding your STRONG SRT 8209 receiver, please visit the official STRONG website or contact their customer service. Refer to the packaging or the official webAcesse o site para obter as informações de contato mais atualizadas.

Website: www.strong.tv

Documentos relacionados - SRT8209

Préview Manual do Usuário do Receptor Digital Terrestre 4K UHD STRONG SRT 8250
Guia conciso do STRONG SRT 8250, um receptor digital terrestre 4K Ultra HD compatível com DVB-T2, Dolby Audio e HEVC. Inclui detalhes de conexão, especificações e informações de conformidade.
Préview Manual do Usuário do Receptor HDMI Terrestre STRONG SRT 82
Manual do usuário completo para o receptor HDMI terrestre STRONG SRT 82, abrangendo configuração, operação, recursos, solução de problemas e especificações técnicas.
Préview Manual do Usuário do Receptor HDMI Terrestre STRONG SRT 82
Comprehensive user manual for the STRONG SRT 82 Terrestrial HDMI Receiver, covering setup, operation, features, troubleshooting, and technical specifications. Learn how to connect, configure, and use your digital receiver for optimal TV viewindo.
Préview Manual do Usuário do Receptor HDMI Terrestre STRONG SRT 82
Comprehensive user manual for the STRONG SRT 82 Terrestrial HDMI Receiver. This guide covers setup, operation, features like Timeshift and EPG, remote control functions, connections, troubleshooting, and technical specifications for your DVB-T2 digital TV receiver.
Préview STRONG SRT 8222 Digital Terrestrial HD Twin Tuner Manual do Usuário
Este manual do usuário fornece instruções completas para o receptor digital terrestre HD de dois sintonizadores STRONG SRT 8222. Ele abrange configuração, conexões, operação, solução de problemas, especificações técnicas e informações de segurança.
Préview Manual do usuário do receptor digital terrestre STRONG SRT 8208 HD
Comprehensive user manual for the STRONG SRT 8208 Digital Terrestrial HD Receiver, covering setup, operation, connections, troubleshooting, and technical specifications. Learn how to install, configure, and use all features of your receiver.