Introdução
The Armor3 "ReadyHub" 3-Port HD Switcher allows you to connect up to three HD game consoles or other HD devices to a single HD display, such as an HDTV or monitor. This device simplifies your setup by eliminating the need to constantly swap cables, providing a convenient way to switch between your connected devices with the push of a button or via the included remote control. It supports 4K resolution, ensuring high-quality video output.
Conteúdo da embalagem
Por favor, verifique se todos os itens estão presentes em sua embalagem:
- Armor3 "ReadyHub" 3-Port HD Switcher
- Controle remoto
- Power Adapter (typically included for active switchers)
Note: HD cables are not included and must be purchased separately.
Image: The Armor3 ReadyHub 3-Port HD Switcher shown in its retail packaging, highlighting its 4K and 3D compatibility.
Instruções de configuração
Follow these steps to connect your Armor3 "ReadyHub" HD Switcher:
- Conecte os dispositivos de entrada: Plug your HD game consoles (e.g., Nintendo Switch, PS4, Xbox One, Wii U, Xbox 360) or other HD devices into the "INPUT 1", "INPUT 2", and "INPUT 3" ports on the HD Switcher using HD cables.
- Conectar ao monitor: Connect one end of an HD cable to the "OUTPUT" port on the HD Switcher and the other end to an available HD input port on your HDTV or display.
- Conecte a energia: Plug the included power adapter into the "DC 5V" port on the HD Switcher, then plug the adapter into a standard electrical outlet. The power indicator light on the switcher should illuminate.
- Selecione Entrada: Turn on your HD display and select the corresponding HD input channel that the switcher is connected to.
Image: The Armor3 ReadyHub HD Switcher with HD cables connected to its input and output ports, alongside its remote control. This illustrates a typical setup configuration.
Instruções de operação
Once connected, you can easily switch between your devices:
- Troca manual: Press the "SELECT" button on the front of the HD Switcher to cycle through the connected input devices (Input 1, Input 2, Input 3). The corresponding LED indicator will light up to show the active input.
- Comutação de controle remoto: Use the included remote control to directly select the desired input. Press the "1", "2", or "3" button on the remote to switch to Input 1, Input 2, or Input 3 respectively.
Ensure that the device you wish to display is powered on for the switcher to detect its signal.
Manutenção
To ensure the longevity and optimal performance of your Armor3 "ReadyHub" HD Switcher:
- Limpeza: Use um pano macio e seco para limpar a parte externa do dispositivo. Não use produtos de limpeza líquidos ou materiais abrasivos.
- Armazenar: Store the switcher in a cool, dry place away from direct sunlight and extreme temperatures.
- Manuseio: Evite deixar cair o dispositivo ou submetê-lo a impactos fortes.
Solução de problemas
If you encounter issues with your HD Switcher, please refer to the following common problems and solutions:
| Problema | Solução |
|---|---|
| Nenhum sinal no visor. |
|
| O controle remoto não funciona. |
|
| A luz indicadora de energia está apagada. |
|
Especificações
- Modelo: M07385
- Entradas: 3 x HD (HDMI)
- Saída: 1 x HD (HDMI)
- Resoluções suportadas: Até 4K
- Compatibilidade: Nintendo Switch, PlayStation 4, Xbox One, Nintendo Wii U, Xbox 360, and other HD devices.
- Dimensões: 4.72 x 1.57 x 4.75 polegadas (12 x 4 x 12.06 cm)
- Peso: 3.2 onças (90.7 gramas)
Garantia e Suporte
For warranty information or technical support, please contact Armor3 customer service. Details can typically be found on the product packaging or the official Armor3 website. Guarde o comprovante de compra para solicitações de garantia.
Para obter mais assistência, você pode visitar o site do fabricante. webou entre em contato com os canais de suporte.
