Orbit 94884 Pocket Star Ultra 4 Station Automatic Indoor Sprinkler Timer

Introdução

The Orbit 94884 Pocket Star Ultra 4 Station Automatic Indoor Sprinkler Timer is designed to provide efficient and automated control over your irrigation system. This timer features an intuitive Easy-Set Logic programming interface, a large, easy-to-read LCD display, and a convenient dial for quick adjustments. It supports up to 4 stations, allowing for flexible watering schedules tailored to your landscape needs.

Os principais recursos incluem:

• Simple toolless 'push-in' terminals for easy wire connections.
• Large, clear LCD display, control dial, and user-friendly buttons.
• Flexible watering times from 1 to 240 minutes per station.
• Up to 8 start times per day for comprehensive scheduling.
• Integrated budgeting feature for water conservation.

Figura 1: Frente view of the Orbit 94884 Pocket Star Ultra Sprinkler Timer, showing the LCD display, control buttons, and programming dial.

Informações de segurança

Please read and understand all safety instructions before installing or operating the sprinkler timer. Failure to follow these instructions may result in electric shock, fire, or property damage.

• This timer is designed for somente para uso interno. Do not install it outdoors or in areas exposed to rain or direct moisture.
• Certifique-se de que a fonte de alimentação esteja desconectada antes de realizar qualquer fiação ou manutenção.
• All electrical connections must comply with local codes and regulations. If unsure, consult a qualified electrician.
• Do not attempt to repair or modify the timer. Refer all servicing to qualified personnel.
• Keep the timer away from children and pets.

Configurar

1. Mounting the Timer

1. Choose a suitable indoor location near a standard electrical outlet, protected from direct sunlight and extreme temperatures.
2. Use the two keyhole slots on the back of the timer as a template to mark the mounting screw locations on the wall.
3. Install two screws (not included) into the wall, leaving approximately 1/8 inch (3 mm) of the screw head exposed.
4. Hang the timer on the screws, then slide it down to secure it.

2. Wiring the Sprinkler Valves

The Orbit 94884 features convenient toolless 'push-in' terminals for easy and secure wire connections. Ensure power is disconnected before wiring.

Figura 2: interno view of the Orbit 94884 Sprinkler Timer showing the wiring terminals for sprinkler valves, common wire, and sensor.

1. Locate the wiring compartment at the bottom of the timer.
2. Each sprinkler valve has two wires. Connect one wire from each valve to the common (COM) terminal. The common terminal is typically labeled and may be a different color (e.g., white or blue).
3. Connect the remaining wire from each valve to its corresponding station terminal (1, 2, 3, 4). For exampPor exemplo, conecte o fio da Zona 1 ao terminal 1, o da Zona 2 ao terminal 2 e assim por diante.
4. If you have a pump start relay or master valve, connect one wire from it to the "PUMP" or "MV" terminal (if available, otherwise use a standard station terminal if configured as such). Connect the other wire to the common (COM) terminal.
5. To insert a wire, simply push it firmly into the designated terminal opening until it clicks into place. To remove, press the small tab next to the terminal and pull the wire out.

3. Conectando energia

Plug the timer's power cord into a standard 230V AC electrical outlet. The LCD display should illuminate, indicating power is supplied.

Instruções de operação

The Orbit 94884 uses an Easy-Set Logic dial and intuitive buttons for programming.

1. Setting Current Time and Date

1. Gire o dial para DATA/RELÓGIO.
2. Use o + e - buttons to set the current year, then press DIGITAR.
3. Repeat for month, day, hour, and minute. Ensure AM/PM is correct.
4. Gire o dial para AUTO quando terminar.

2. Setting Start Times

The timer allows up to 8 start times per program (A or B).

1. Gire o dial para HORA DE INÍCIO.
2. The display will show "1st START". Use + e - to set the desired start time. Press DIGITAR.
3. Continue setting additional start times (2nd, 3rd, etc.) as needed. To clear a start time, use + or - until "OFF" appears, then press DIGITAR.
4. Gire o dial para AUTO quando terminar.

3. Setting Run Times (Station Durations)

This sets how long each station will water when activated.

1. Gire o dial para TEMPO DE EXECUÇÃO.
2. The display will show "STATION 1". Use + e - to set the watering duration (1-240 minutes). Press DIGITAR.
3. Pressione o SETA PARA A DIREITA button to move to the next station (STATION 2, 3, 4) and set its run time.
4. Gire o dial para AUTO quando terminar.

4. Setting How Often to Water (Watering Days)

You can choose specific days of the week or an interval schedule.

1. Gire o dial para COM QUE FREQUÊNCIA.
2. Use o SETA PARA A DIREITA or SETA PARA A ESQUERDA buttons to select the desired watering days.
   • To select specific days: The day of the week will flash. Press DIGITAR to select or deselect the day. Move to the next day using the SETA PARA A DIREITA botão.
   • To select interval watering: Continue pressing SETA PARA A DIREITA until "INTERVAL" appears. Use + e - to set the interval (e.g., every 2 days).
3. Gire o dial para AUTO quando terminar.

5. Operação manual

Para regar manualmente uma estação ou todas as estações:

1. Pressione o MANUAL botão.
2. Use o SETA PARA A DIREITA or SETA PARA A ESQUERDA buttons to select the desired station to water, or select "ALL" to water all stations sequentially.
3. Imprensa DIGITAR to start manual watering. The display will show the remaining time.
4. Para interromper a rega manual, pressione CLARO or turn the dial to DESLIGADO e então de volta para AUTO.

6. Rain Delay

To temporarily suspend watering for a period due to rain or other reasons:

1. Pressione o ATRASO POR CHUVA botão.
2. Use o + e - buttons to select the number of days for the delay (24, 48, or 72 hours).
3. The timer will automatically resume its schedule after the delay period expires. To cancel the rain delay, press ATRASO POR CHUVA de novo.

7. Seasonal Adjust / Budgeting

This feature allows you to adjust all station run times by a percentage without reprogramming each station individually.

1. Gire o dial para ORÇAMENTO.
2. Use o + e - botões para definir a porcentagem desejadatage (e.g., 50% for half the watering time, 120% for 20% more).
3. Gire o dial para AUTO quando terminar.

Manutenção

• Limpeza: Wipe the timer's exterior with a soft, damp pano. Não use produtos de limpeza abrasivos ou solventes.
• Poder Outage: The timer has a built-in memory to retain programming during power outages. However, the clock may need to be reset if the outage é prolongado.
• Winterização: As this is an indoor timer, specific winterization for the unit itself is not required. However, ensure that any connected outdoor irrigation components (valves, pipes) are properly drained and winterized according to their respective manuals to prevent freeze damage.

Solução de problemas

Especificações

Garantia e Suporte

Orbit products are manufactured to high quality standards and are backed by a limited warranty. For specific warranty details, terms, and conditions, please refer to the warranty card included with your product or visit the official Orbit website.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Orbit customer support. Contact information can typically be found on the product packaging or the manufacturer's official website:

Visit Orbit Support Website