Manual do Usuário do Medidor de Controle de Temperatura Inteligente Universal SINOTIMER MC901-611
Marca: SINOTIMER
Modelo: MC901-611
1. Introdução
The SINOTIMER MC901-611 is a universal intelligent temperature control meter designed for precise temperature regulation in various industrial and laboratory applications. This device features a clear LCD display, multiple input types, and reliable output options, making it suitable for a wide range of temperature control needs. This manual provides essential information for the safe and effective operation, installation, and maintenance of your MC901-611 temperature controller.
2. Informações de segurança
Please read this manual thoroughly before operating the device to ensure safe and correct usage. Keep this manual for future reference.
Precauções Gerais de Segurança:
- Certifique-se de que a fonte de alimentação voltage matches the specifications of the device (100-240V AC, 50/60Hz).
- Do not operate the device in environments with excessive dust, humidity, corrosive gases, or strong vibrations.
- Disconnect power before performing any wiring, maintenance, or inspection.
- Somente pessoal qualificado deve realizar a instalação e a fiação.
- Avoid touching internal components when the device is powered on.
- Garanta um aterramento adequado para evitar choque elétrico.
- Não desmonte nem modifique o dispositivo. Modificações não autorizadas podem anular a garantia e representar riscos à segurança.
3. Produto acabadoview
The MC901-611 temperature controller features a compact design with a clear digital display and intuitive control buttons.
Figura 3.1: painel frontal
This image displays the front panel of the MC901-611. It features two digital displays: PV (Process Value) in red, showing the current temperature, and SV (Set Value) in green, showing the target temperature. Below the displays are indicator lights for OUT (Output), AT (Auto-tuning), ALM1 (Alarm 1), and ALM2 (Alarm 2). The control buttons include SET, R/S (Run/Stop), Down arrow, and Up arrow.
Componentes principais:
- Exibição fotovoltaica: Shows the current measured temperature (Process Value).
- Exibição SV: Shows the set target temperature (Set Value).
- Luzes indicadoras: OUT (Output status), AT (Auto-tuning status), ALM1 (Alarm 1 status), ALM2 (Alarm 2 status).
- Botões de controle: SET (Enter/Confirm settings), R/S (Run/Stop), Up/Down arrows (Adjust values).
- Bloco terminal: Located at the rear for electrical connections.
- Suportes de montagem: For secure panel installation.
Figure 3.2: Side Panel with Specifications Label
This image shows the side of the MC901-611, highlighting the product label. The label provides crucial information such as Model (MC901-611), Input type (K, default setting), Temperature Range (0-1300°C), Temperature Unit (Celsius/Fahrenheit), Output type (Relay/SSR), Alarm (ALM1), Accuracy Class (0.5), and Power Supply (100-240V AC, 50/60Hz).
Figure 3.3: Rear Panel with Terminal Block
This image displays the rear of the MC901-611, featuring the terminal block for electrical connections. The terminals are clearly numbered, indicating where to connect power, sensor inputs, and control outputs. Proper wiring according to the provided diagram is essential for safe and correct operation.
4. Configuração e instalação
4.1 Panel Mounting:
The MC901-611 is designed for panel mounting. Ensure the cutout dimensions in your panel match the device's specifications.
- Cut an opening in your panel according to the specified dimensions (refer to specifications section for exact size).
- Insert the MC901-611 into the panel cutout from the front.
- Attach the provided mounting brackets to the sides of the controller from the rear of the panel.
- Tighten the screws on the mounting brackets to secure the controller firmly in place. Do not overtighten.
Figura 4.1: Suportes de montagem
This image shows the two mounting brackets included with the MC901-611. These brackets are used to secure the temperature controller firmly within a panel cutout, ensuring stable installation.
4.2 Diagrama de fiação:
Refer to the wiring diagram on the side of the unit or in the detailed manual for correct connections. Ensure all connections are secure and insulated.
- Fonte de energia: Connect the main power supply (100-240V AC, 50/60Hz) to the designated terminals.
- Entrada do sensor: Connect your temperature sensor (e.g., K-type thermocouple) to the sensor input terminals. Ensure correct polarity for thermocouples.
- Saída de controle: Connect your heating/cooling element or SSR to the control output terminals.
- Alarm Output (Optional): If using alarm functions, connect external alarm devices to the alarm output terminals.
Note: A detailed wiring diagram is typically provided on the physical unit or in a separate wiring guide. Always consult the specific diagram for your model.
5. Instruções de operação
5.1 Ligar:
Once wired correctly, apply power to the unit. The PV display will show the current temperature, and the SV display will show the last set temperature.
5.2 Setting the Target Temperature (SV):
- Pressione o DEFINIR Pressione o botão uma vez. O visor SV começará a piscar.
- Use o Up (▲) e Abaixo (▼) arrow buttons to adjust the target temperature.
- Pressione o DEFINIR button again to confirm the new SV and exit the setting mode. The SV display will stop flashing.
5.3 Configurações de parâmetros:
To access advanced parameter settings (e.g., input type, control mode, alarm settings):
- Pressione e segure o DEFINIR button for approximately 3-5 seconds until the first parameter code appears on the PV display.
- Use o Up (▲) e Abaixo (▼) arrow buttons to navigate through different parameter codes.
- Imprensa DEFINIR para view the value of the currently displayed parameter.
- Use o Up (▲) e Abaixo (▼) arrow buttons to change the parameter value.
- Imprensa DEFINIR to confirm the new value and return to the parameter code display.
- To exit parameter setting mode, press and hold the DEFINIR Pressione o botão novamente por 3 a 5 segundos ou aguarde até que o dispositivo desligue automaticamente após um período de inatividade.
Consult the full product manual for a complete list of parameter codes and their functions.
5.4 Auto-tuning (AT):
Auto-tuning helps the controller optimize its PID parameters for stable and accurate temperature control. This process is recommended after initial setup or if control performance is unsatisfactory.
- Set the desired target temperature (SV).
- Pressione e segure o R/S button for approximately 3-5 seconds. The AT indicator light will illuminate, and the controller will begin the auto-tuning process.
- Allow the auto-tuning process to complete. This may take some time as the controller cycles the output to learn the system's characteristics. The AT light will turn off once tuning is complete.
- Do not interrupt the auto-tuning process.
6. Manutenção
Regular maintenance ensures the longevity and optimal performance of your MC901-611 temperature controller.
- Limpeza: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the unit. Do not use abrasive cleaners, solvents, or water, as these can damage the display or internal components.
- Inspeção: Periodically check all wiring connections for looseness or damage. Ensure the terminal screws are tight.
- Ambiente: Assegure-se de que o ambiente operacional permaneça dentro das faixas de temperatura e umidade especificadas para evitar danos.
- Verificação do sensor: If temperature readings appear inaccurate, check the sensor and its wiring for damage or corrosion.
7. Solução De Problemas
This section addresses common issues you might encounter with your MC901-611 temperature controller.
| Problema | Possível causa | Solução |
|---|---|---|
| Sem imagem/Desligado | No power supply; Loose wiring; Blown fuse. | Check power connection; Verify wiring; Replace fuse if necessary (by qualified personnel). |
| PV display shows "HHHH" or "LLLL" | Sensor open circuit (HHHH); Sensor short circuit or reverse connection (LLLL); Sensor type mismatch. | Check sensor wiring and connections; Ensure correct sensor type is selected in parameters. |
| Temperature not controlled accurately | Incorrect PID parameters; Sensor not properly installed; Load capacity mismatch. | Perform auto-tuning; Ensure sensor is in good thermal contact with the process; Verify output capacity matches load. |
| Output indicator (OUT) not lighting up | SV is equal to PV (no control action needed); Output wiring issue; Internal fault. | Check SV and PV values; Inspect output wiring; If problem persists, contact support. |
Se o problema persistir após tentar essas soluções, entre em contato com o suporte ao cliente.
8. Especificações
Technical specifications for the SINOTIMER MC901-611 Universal Intelligent Temperature Control Meter.
| Recurso | Especificação |
|---|---|
| Modelo | MC901-611 |
| Tipo de entrada | K (default setting), Universal Input |
| Faixa de temperatura | 0-1300°C (depending on sensor type) |
| Unidade de temperatura | Celsius/Fahrenheit selectable |
| Tipo de saída | Relay/SSR |
| Alarme | ALM 1 |
| Classe de precisão | 0.5 |
| Fonte de energia | 100-240 V CA, 50/60 Hz |
| Tipo de exibição | LCD |
| Peso do item | 8.8 onças |
| Dimensões da embalagem | 4.3 x 4.3 x 3.6 polegadas |
9. Garantia e Suporte
Informações sobre garantia:
SINOTIMER products are typically covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or contact SINOTIMER customer service for specific warranty terms and conditions.
Suporte ao cliente:
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact SINOTIMER customer support. Have your product model number (MC901-611) and purchase information ready when contacting support.
Contact information for SINOTIMER can usually be found on their official website ou na embalagem do produto.
