1. Introdução
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your FABER 2740 SRM 60cm under-cabinet cooker hood. Please read these instructions carefully before using the appliance and retain them for future reference.
2. Informações de segurança
- Ensure the electrical installation complies with local safety regulations.
- Não permita que crianças operem o aparelho.
- Limpe regularmente os filtros de gordura para evitar riscos de incêndio.
- Não flambe sob o exaustor.
- Ensure adequate ventilation when the hood is used simultaneously with gas or other fuel-burning appliances.
- Desligue o aparelho da fonte de alimentação antes de qualquer limpeza ou manutenção.
3. Produto acabadoview
The FABER 2740 SRM is a 60cm under-cabinet cooker hood designed for integration into kitchen cabinets. It features 3W LED lighting for illuminating the cooking area and offers three adjustable suction power levels.
Figure 1: FABER 2740 SRM cooker hood installed under a kitchen cabinet, showcasing seu design integrado.
4. Instalação
The cooker hood can be installed in two modes: ducted (external extraction) or recirculating (internal filtration).
4.1 Montagem
Refer to the provided technical diagram for precise measurements and mounting points. The hood is designed for under-cabinet installation.
Figure 2: Technical drawing with dimensions for FABER 2740 SRM cooker hood installation. Ensure cabinet and ducting clearances are met.
4.2 Ducted Mode (External Extraction)
In ducted mode, cooking fumes are expelled outside the home through an exhaust duct (not included). Ensure the ducting is correctly sized and sealed to maximize efficiency.
Figure 3: Diagram showing ducted extraction mode, where air is vented outside.
4.3 Recirculating Mode (Internal Filtration)
If external air evacuation is not possible, the hood can operate in recirculating mode. This requires the installation of activated carbon filters (not included) to purify cooking odors before releasing clean air back into the kitchen environment.
Figure 4: Diagram showing recirculating filtration mode, where air is filtered and returned to the kitchen.
5. Instruções de operação
The FABER 2740 SRM features push-button controls for managing suction speed and lighting.
5.1 Controles
The control panel typically consists of buttons for:
- Ligar/desligar: Ativa ou desativa o capô.
- Seleção de velocidade: Adjusts the motor speed (Level 1, 2, or 3).
- Luz LIGADA/DESLIGADA: Controla a iluminação LED.
5.2 Configurações de velocidade
Select the appropriate speed level based on the intensity of cooking fumes:
- Nível 1: For light cooking, simmering.
- Nível 2: For normal cooking, moderate fumes.
- Nível 3: Para preparos que exigem muita técnica, frituras ou para eliminar odores fortes.
5.3 Iluminação
Press the light button to turn the 3W LED lighting on or off, providing illumination for your cooking surface.
6. Manutenção
A manutenção regular garante o desempenho ideal e a longevidade do seu exaustor.
6.1 Metal Anti-Grease Filters
The hood includes metal anti-grease filters designed to capture cooking grease. These filters should be cleaned approximately once a month, depending on usage. They are easy to remove and are dishwasher-safe.
Figure 5: Metal anti-grease filters. These should be cleaned regularly.
6.2 Activated Carbon Filters (Optional)
For recirculating mode, activated carbon filters (not included) are required to remove odors. These filters cannot be washed and must be replaced approximately every 3 months, or more frequently with heavy use. Use only original FABER filters to ensure compatibility and performance.
Figure 6: Activated carbon filters. These are essential for odor removal in recirculating mode.
7. Solução De Problemas
Se você tiver problemas com o seu exaustor, consulte os problemas e soluções comuns a seguir:
| Problema | Possível causa | Solução |
|---|---|---|
| O capô não liga. | Sem alimentação elétrica; Cabo de alimentação desconectado; Fusível queimado. | Verifique a ligação elétrica; verifique o disjuntor/caixa de fusíveis. |
| Baixo poder de sucção | Grease filters clogged; Activated carbon filters saturated (recirculating mode); Ducting obstructed or too long/narrow. | Clean grease filters; Replace activated carbon filters; Check ducting for obstructions. |
| Ruído excessivo | Loose components; Incorrect installation; Obstruction in fan. | Check for loose screws; Ensure correct installation; Inspect fan for foreign objects. |
| Luzes não funcionam | Lâmpada defeituosa; Problema de ligação elétrica. | Replace LED bulb (if replaceable); Check electrical connections. |
Se o problema persistir após a tentativa dessas soluções, entre em contato com pessoal de serviço qualificado.
8. Especificações
Technical details for the FABER 2740 SRM cooker hood:
- Número do modelo: 300.0557.576
- Dimensões (C x L x A): 59.8 x 48.6 x 15 cm
- Peso: 8.6 quilos
- Material: Liga de aço
- Tipo de montagem: Under-cabinet
- Tipo de controle: Botão de pressão
- Tipo de ventilação: Dutado ou recirculante
- Capacidade de fluxo de ar: 380 Cubic meters per hour
- Nível de ruído: 70 decibéis (máximo)
- Tipo de fonte de luz: LED (3 W)
- Classe de eficiência energética: D
- Tipo de filtro: Metal Anti-Grease (included), Activated Carbon (compatible, not included)
Figure 7: Energy efficiency label for the FABER 2740 SRM cooker hood.
9. Garantia e Suporte
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or spare parts, please contact FABER customer service or visit the official FABER website.
Ensure to have your model number (2740 SRM or 300.0557.576) and purchase date available when contacting support.
