Manual do Usuário do UPS Interativo Amazon Basics Line 1000VA/550W

Introdução

This manual provides essential information for the safe and efficient operation of your Amazon Basics Line Interactive Uninterruptible Power Supply (UPS) 1000VA/550W. A UPS provides battery backup power and surge protection for connected electronic devices, safeguarding against power outages, surges, and fluctuations. Please read this manual thoroughly before installation and use, and retain it for future reference.

Image: The Amazon Basics Line Interactive UPS 1000VA/550W positioned on a desk, providing power protection for a computer setup.

Instruções importantes de segurança

Please adhere to these safety guidelines to prevent injury or damage to the UPS and connected equipment:

• Este nobreak foi projetado apenas para uso interno.
• Do not install the UPS in direct sunlight, near heat-emitting appliances, or in areas with excessive humidity or dust.
• Certifique-se de que o UPS esteja conectado a uma tomada CA aterrada.
• Não abra a caixa da UPS.asing. Não existem peças que possam ser reparadas pelo usuário no interior. Encaminhe todos os serviços de manutenção para pessoal qualificado.
• Risk of electric shock. Do not connect or disconnect the UPS during a thunderstorm.
• The battery inside the UPS is not user-replaceable. Attempting to replace the battery yourself may void the warranty and pose a safety risk.
• In case of fire, use a dry chemical fire extinguisher. Water may cause electrical hazards.

Conteúdo da embalagem

Verifique se todos os itens estão presentes no seu pacote:

• Amazon Basics Line Interactive UPS 1000VA/550W Unit
• Cabo de comunicação USB
• Manual do usuário (este documento)

Image: USB Communication Cable included with the UPS.

Produto acimaview

Painel frontal

Imagem: Frente view of the Amazon Basics Line Interactive UPS 1000VA/550W, showing the power button, mute button, and LED indicators.

1. Botão de energia: Press to turn the UPS ON or OFF.
2. Botão Mudo: Press to silence audible alarms.
3. Indicadores LED:
   • ON-LINE: Illuminates when the UPS is providing utility power to connected devices.
   • NA BATERIA: Acende quando o UPS está funcionando com energia da bateria.
   • AVR (Vol Automáticotage Regulamento): Illuminates when the UPS is correcting minor voltage fluctuations without switching to battery power.
   • SOBRECARGA: Acende se o equipamento conectado exceder a capacidade do UPS.

Painel traseiro

Imagem: Traseira view of the Amazon Basics Line Interactive UPS 1000VA/550W, displaying the power cord, battery backup outlets, and surge-only outlets.

1. Tomadas com proteção contra surtos e bateria de reserva (5 tomadas): These outlets provide both battery backup power during outages and surge protection. Connect critical devices such as computers, monitors, and network equipment here.
2. Surge Protected Outlets (4 outlets): These outlets provide surge protection only. Connect non-critical devices like printers or scanners here.
3. Porta de comunicação USB: Connects to a computer for power management software (e.g., CyberPower PowerPanel Personal).
4. Cabo de alimentação de entrada CA: Conecta o UPS a uma tomada de parede.

Configurar

1. Desembale e inspecione: Carefully remove the UPS from its packaging. Inspect for any shipping damage. If damage is found, do not use the unit and contact customer support.
2. Carga inicial da bateria: Before initial use, connect the UPS to a standard wall outlet and allow it to charge for at least 8 hours. This ensures the battery is fully charged and ready to provide optimal backup power. The UPS will charge whether it is turned ON or OFF.
3. Conectar dispositivos:
   • Plug critical equipment (e.g., computer, monitor, router) into the Backup de bateria e tomadas protegidas contra surtos.
   • Plug non-critical equipment (e.g., printer, desk lamp) para dentro do Tomadas protegidas contra surtos.
   • Cuidado: Do not plug laser printers into battery backup outlets, as their high power draw can overload the UPS.
4. Conectar ao computador (opcional): Use the provided USB cable to connect the UPS's USB port to your computer's USB port. This allows for power management software installation, enabling features like automatic shutdown during extended power outage.
5. Ligar: Press and hold the Power Button on the front panel for approximately 2 seconds until you hear a beep and the UPS powers on.

Instruções de operação

Turning the UPS On/Off

• Para Ativar: Press and hold the Power Button for 2 seconds. The UPS will beep, and the ONLINE LED will illuminate.
• Desligar: Press and hold the Power Button for 2 seconds. The UPS will beep, and all LEDs will turn off.

Understanding LED Indicators and Alarms

• ONLINE (Green LED): Solid green indicates the UPS is receiving utility power and providing it to connected devices.
• ON BATTERY (Yellow LED): Solid yellow indicates the UPS is supplying battery power. An audible alarm will sound (beeping every 10 seconds).
• AVR (Yellow LED): Solid yellow indicates the UPS is automatically regulating input voltage sem usar bateria.
• OVERLOAD (Red LED): Solid red indicates that the connected load exceeds the UPS's capacity. An audible alarm will sound continuously. Immediately disconnect non-essential equipment from the battery backup outlets until the alarm stops.
• Bateria fraca: When the UPS is on battery power and the battery level is low, the ON BATTERY LED will flash, and the alarm will beep more frequently (every 1 second).
• Alarme mudo: Press the Mute Button to silence audible alarms. The alarm will reactivate if the condition changes (e.g., low battery).

Tempo de execução da bateria

The battery runtime depends on the power consumption of the connected devices. For this 1000VA/550W model:

• At half load (500VA/275W), the UPS provides approximately 7 minutos of backup power.
• At full load (1000VA/550W), the UPS provides approximately 1 minuto of backup power.

It is recommended to save your work and safely shut down your computer during a power outage to prevent data loss.

Manutenção

Cuidados com a bateria

• To maintain optimal battery life, keep the UPS connected to an AC outlet at all times.
• If the UPS is stored for an extended period, recharge the battery every three months for at least 8 hours to prevent battery degradation.
• Batteries have a finite lifespan and will eventually require replacement. If you notice a significant decrease in runtime, contact Amazon Basics customer support for guidance on battery replacement options.

Limpeza

• Always unplug the UPS from the wall outlet before cleaning.
• Use a soft, dry cloth to wipe the exterior surfaces of the UPS.
• Não utilize produtos de limpeza líquidos ou em aerossol, pois podem conter substâncias inflamáveis ​​ou causar choque elétrico.

Solução de problemas

Especificações

Image: Diagram showing the dimensions of the Amazon Basics Line Interactive UPS 1000VA/550W.

Garantia e Suporte

This Amazon Basics UPS is backed by a limited 1-year warranty, which includes the battery. For warranty claims, technical support, or questions regarding battery replacement, please contact Amazon Basics customer support through the Amazon website ou sua plataforma de compra.

For the most up-to-date support information, please visit the official Amazon Basics support page or refer to your purchase documentation.