Introdução
O ventilador de torre oscilante PELONIS de 3 velocidades com temporizador e controle remoto oferece o máximo conforto em um espaço mínimo. Com um design alto e estreito, ele proporciona conforto em espaços reduzidos.file, this fan is ideal for smaller rooms or areas with limited floor space. It features three speeds, multiple modes, and a timer for automatic shutoff. A convenient remote control allows for easy operation from a distance.

Figure 1: PELONIS FZ10-19JR Quiet Oscillating Tower Fan and Remote Control.
Informações de segurança
Always read and follow all safety instructions before using this appliance to prevent injury or damage. Keep this manual for future reference.
- Proteção contra superaquecimento: The motor has built-in overheat protection for peace of mind, automatically shutting off the fan if it overheats.
- Segurança infantil: The compact design on the fan grid ensures the safety of children by preventing finger penetration.
- Aviso da Proposta 65: Este produto pode conter produtos químicos conhecidos pelo estado da Califórnia por causar câncer e defeitos congênitos ou outros danos reprodutivos.
- Certifique-se de que o ventilador esteja colocado em uma superfície estável e plana para evitar que tombe.
- Não introduza os dedos ou objetos estranhos na grelha da ventoinha.
- Desligue o ventilador da tomada antes de limpá-lo ou realizar qualquer manutenção.
Conteúdo da embalagem
Verifique se todos os componentes estão presentes ao abrir a embalagem:
- PELONIS FZ10-19JR Tower Fan Unit
- Controle remoto
- Base Parts (multiple pieces for assembly)
- Manual do usuário (PDF disponível online)
Configurar
The PELONIS FZ10-19JR Tower Fan requires minimal assembly. Follow these steps to set up your fan:
- Monte a base: The base comes in multiple pieces. Snap the base pieces together securely.
- Fixe a unidade de ventilação à base: Carefully align the fan unit with the assembled base. Ensure the power cord is routed through the designated opening in the base.
- Proteja a Base: Locate the screw underneath the base and tighten it to firmly attach the fan unit to the base.
- Colocação: Coloque o ventilador montado sobre uma superfície plana e estável.
- Conexão de energia: Plug the fan into a standard 120V/60HZ power outlet.

Figure 2: The 36-inch height of the tower fan, highlighting its compact design and various features.

Figure 3: Key features of the PELONIS tower fan, including silent operation, wide-angle airflow, timer, and auto shut-off.
Vídeo 1: Um excessoview of the 36-inch PELONIS FZ10-19JR Oscillating Tower Fan, demonstrating its compact size and features.
Instruções de operação
Your PELONIS tower fan can be operated using the multi-functional control panel on top of the unit or the included remote control.
Painel de controle e remoto
Both the control panel and the remote offer identical functions for convenience. The control panel is located on the top of the fan for easy access without bending.

Figure 4: Close-up of the overhead control panel, highlighting the tight fence design for safety and the internal gale wheel for air volume.
- Botão liga/desliga: Liga ou desliga o ventilador.
- Botão de modo: Alterna entre diferentes modos de vento (Normal, Natural, Sono).
- Botão de velocidade: Ajusta a velocidade do ventilador (Baixa, Média, Alta).
- Oscillation Button (Osc): Activates or deactivates the 60° wide-angle oscillation function.
- Botão do temporizador: Sets the automatic shutoff timer (up to 7 hours).
Modos de Ventilador
- Vento Normal: Provides a constant airflow.
- Vento Natural: Simulates natural breezes with alternating strong and weak airflows.
- Modo dormir: Operates at a low noise level (as low as 48 dB) for undisturbed sleep. The LED display auto-off after 30 seconds to minimize light disturbance.

Figure 5: Visual representation of the fan's different wind modes: Natural Wind, Normal Wind, and Strong Airflow.

Figure 6: The fan's quiet operation in sleep mode, ideal for bedrooms and nurseries.

Figure 7: Illustration of the fan's ultra-silence feature (below 48dB on low speed), perfect for quiet environments.
Armazenamento de controle remoto
The fan features a built-in cubby at the back for convenient storage of the remote control, ensuring it is always within reach and not easily misplaced.
Video 2: Demonstration of the remote control storage slot on the back of the Pelonis Tower Fan.
Manutenção
A limpeza regular ajuda a manter o desempenho do ventilador e prolonga sua vida útil.
- Limpeza externa: Use um pano macio e macioamp cloth to wipe down the exterior surfaces of the fan. Do not use abrasive cleaners or solvents.
- Limpeza da grelha: Use a vacuum cleaner with a brush attachment to remove dust from the fan grilles. For deeper cleaning, a compressed air can may be used to dislodge dust from hard-to-reach areas.
- Limpeza interna: The fan is not designed for easy disassembly for internal cleaning. Regular external cleaning and compressed air use are recommended to minimize dust accumulation inside.
- Certifique-se de que o ventilador esteja completamente seco antes de ligá-lo novamente na tomada.
Solução de problemas
If you encounter issues with your PELONIS tower fan, try the following troubleshooting steps:
- Ventilador não liga:
- Certifique-se de que o cabo de alimentação esteja firmemente conectado a uma tomada elétrica em funcionamento.
- Verifique se a tomada está funcionando conectando outro aparelho.
- Verify the fan's power button is pressed.
- Fan Not Oscillating:
- Pressione o botão de oscilação no painel de controle ou no controle remoto.
- Ensure there are no obstructions preventing the fan from rotating.
- Fluxo de ar fraco:
- Aumente a velocidade do ventilador.
- Clean the fan grilles to remove any dust or debris that may be obstructing airflow.
- Ruído incomum:
- Certifique-se de que o ventilador esteja colocado em uma superfície estável e nivelada.
- Check for any loose parts or foreign objects within the fan grilles.
- If the noise is a creaking sound during oscillation, ensure the base is not overtightened. Loosen it slightly if necessary.
- Controle remoto não funciona:
- Ensure the remote control's batteries are correctly installed and not depleted.
- Point the remote directly at the fan's control panel.
- Certifique-se de que não haja obstruções entre o controle remoto e o ventilador.
Especificações
| Recurso | Detalhe |
|---|---|
| Marca | PELONIS |
| Nome do modelo | FZ10-19JR |
| Cor | Preto brilhante |
| Projeto de ventilador elétrico | ventilador de pé |
| Fonte de energia | Elétrico com fio |
| Estilo | Moderno |
| Dimensões do produto | 11.8"P x 11.8"L x 36.14"A |
| Tipo de quarto | Quarto |
| Recurso especial | Oscilante |
| Usos recomendados | Office, Air Circulation, Bedroom, Living Room, Home |
| Nível de ruído | 48 dB |
| Tipo de acabamento | Lustroso |
| Volumetage | 120 Volts |
| Componentes incluídos | Remoto |
| Uso interno/externo | Interior |
| Especificação Atendida | ETL |
| Método de controle | Remoto |
| Material da lâmina | Plástico |
| Número de níveis de potência | 3 |
| Fabricante | Pelonis |
| UPC | 750545105431 |
| Peso do item | 9.13 libras |
Garantia e Suporte
PELONIS offers a Garantia do fabricante de 1 ano with the purchase of this product, demonstrating confidence in its quality.
For detailed information, refer to the official User Manual (PDF) available online:
Baixar Manual do Usuário (PDF)
For further assistance or inquiries, please visit the official PELONIS Store on Amazon: PELONIS Store





