1. Introdução
This manual provides essential information for the installation, operation, and maintenance of your ETON UG-MB100-CNX 100mm coaxial speaker system. This speaker is specifically designed as a plug-and-play central speaker for various Mercedes-Benz models. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.
Image 1: ETON UG-MB100-CNX Coaxial Speaker System. This image displays the front and rear views of the 100mm coaxial speaker, highlighting its robust construction and integrated tweeter.
2. Produto acabadoview
The ETON UG-MB100-CNX is a high-quality 100mm (4-inch) coaxial speaker system engineered for seamless integration into specific Mercedes-Benz vehicles. It features a fiberglass-reinforced polyamide basket and an integrated 15mm aluminum tweeter, designed for precise sound reproduction. The system includes a frequency crossover cable for optimal audio performance.
2.1 Conteúdo da embalagem
- 1x ETON UG-MB100-CNX Coaxial Speaker
- 1x Frequency Crossover Cable
3. Compatibilidade do veículo
The UG-MB100-CNX is designed as a central speaker for the following Mercedes-Benz models. Please refer to the compatibility list below to confirm your vehicle's suitability.
Image 2: Mercedes-Benz Compatibility List. This image shows a table detailing compatible Mercedes-Benz vehicle types (C, GLC, E, S Class) and their respective chassis codes (W205, X253, W213, W222) for various ETON speaker models, with the 'CENTER' column (MB100 CNX) highlighted.
Compatible Models (Central Speaker):
- Mercedes-Benz C-Class (W205)
- Mercedes-Benz GLC-Class (X253)
- Mercedes-Benz E-Class (W213)
- Mercedes-Benz S-Class (W222)
4. Configuração e instalação
The ETON UG-MB100-CNX is designed for a "Plug and Play" installation, meaning it integrates directly with existing wiring and mounting points in compatible Mercedes-Benz vehicles. While designed for ease of installation, professional installation is recommended to ensure correct wiring, optimal sound performance, and to avoid damage to your vehicle's interior or electrical system.
4.1 General Installation Steps (Consult Vehicle-Specific Guides)
- Segurança em primeiro lugar: Desconecte a bateria do veículo antes de iniciar qualquer trabalho elétrico.
- Acesse a localização do palestrante: Carefully remove the trim panels and grilles covering the central speaker location in your Mercedes-Benz. Refer to your vehicle's service manual for specific instructions on panel removal.
- Remove Old Speaker: Disconnect the wiring from the existing central speaker and unmount it from its housing.
- Install ETON Speaker: Connect the provided frequency crossover cable to the ETON UG-MB100-CNX speaker. Then, connect the speaker's wiring to the vehicle's audio harness. Ensure all connections are secure.
- Mount New Speaker: Secure the ETON UG-MB100-CNX speaker into the designated central speaker housing. The speaker's design should align with the factory mounting points.
- Sistema de teste: Before reassembling the interior, reconnect the vehicle's battery and test the audio system to ensure the new speaker is functioning correctly.
- Remontar: Carefully reattach all trim panels and grilles.
Importante: Incorrect installation can lead to damage to the speaker or vehicle's electrical system. If you are unsure about any step, seek assistance from a qualified car audio technician.
5. Instruções de operação
The ETON UG-MB100-CNX is a passive speaker and does not require specific operational controls beyond those of your vehicle's existing audio system. Once installed, it will function as part of your car's sound setup.
5.1 Audio System Integration
- Controle de volume: Adjust the volume using your vehicle's head unit or steering wheel controls.
- Balanço e Fader: Use your vehicle's audio settings to adjust the balance (left/right) and fader (front/rear) to achieve your preferred sound stage.
- Configurações do equalizador: Experiment with your vehicle's equalizer or tone controls (bass, treble, midrange) to fine-tune the sound to your personal preference. Start with flat settings and make small adjustments.
- Evite dirigir em excesso: While the speaker is rated for 50W musical power, avoid playing audio at excessively high volumes for extended periods, as this can lead to distortion and potential damage to the speaker or your hearing.
6. Manutenção e Cuidados
The ETON UG-MB100-CNX speaker system is designed for durability and requires minimal maintenance.
- Limpeza: Use a soft, dry cloth to gently wipe the speaker grille and surrounding areas. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the speaker materials or vehicle interior.
- Condições ambientais: Ensure the speaker area remains free from excessive moisture, dust, and extreme temperatures.
- Inspeção: Periodically check the speaker grille for any obstructions or damage.
7. Solução De Problemas
If you experience issues with your ETON UG-MB100-CNX speaker, consider the following troubleshooting steps:
- Sem som:
- Check all wiring connections to ensure they are secure and correctly connected.
- Verify that your vehicle's audio system is powered on and functioning correctly with other speakers.
- Ensure the balance and fader settings on your head unit are not set to exclude the central speaker.
- Som distorcido:
- Reduza o nível de volume. A distorção geralmente ocorre quando o amplifier or speaker is overdriven.
- Verifique se há conexões soltas ou fiação danificada.
- Inspect the speaker cone for any visible damage or obstructions.
- Adjust equalizer settings; excessive bass or treble can sometimes cause distortion.
- Som intermitente:
- Check for loose wiring connections at both the speaker and the vehicle's audio harness.
- Ensure the speaker is securely mounted and not vibrating excessively.
If these steps do not resolve the issue, contact a qualified car audio technician or ETON customer support for further assistance.
8. Especificações técnicas
| Recurso | Especificação |
|---|---|
| Nome do modelo | UG-MB100-CNX |
| Tipo de alto-falante | Coaxial Central Speaker |
| Tamanho do alto-falante | 100 mm (4 polegadas) |
| Tweeter | 15 mm Alumínio |
| Impedância | 4 Ohms |
| Musical Power (Max) | 50 Watts |
| Nível de pressão sonora (NPS) | 89 dB |
| Fonte de energia | Wired Electrical |
| Tecnologia de Conectividade | Auxiliar |
| Dispositivos compatíveis | Sistema de áudio para carro |
| Configuração de canais de som surround. | 2.0 |
| Dimensões da embalagem | 31.4 x 25.5 x 7.9 cm |
| Peso da embalagem | 841 gramas |
| Fabricante | Eton |
9. Informações de garantia
The ETON UG-MB100-CNX speaker system comes with a limited warranty. The specific terms and duration of the warranty may vary depending on your region and the retailer from whom the product was purchased.
Please retain your proof of purchase (receipt or invoice) as it will be required for any warranty claims. For detailed warranty information, please refer to the documentation provided with your purchase or contact your authorized ETON dealer or the manufacturer directly.
10. Suporte ao cliente
Should you require further assistance with your ETON UG-MB100-CNX speaker system, including technical support, installation queries, or warranty service, please contact:
- Your Authorized ETON Dealer: The retailer from whom you purchased the product can often provide immediate support.
- ETON Customer Service: Visit the official ETON webSite com informações de contato, perguntas frequentes e recursos adicionais.
When contacting support, please have your product model number (UG-MB100-CNX) and proof of purchase readily available.
