1. Produto acabadoview
The Beta 1972/18 is an ultra-compact 18V brushless impact driver designed for professional use. It features a digital motor for enhanced performance, offering more power, reduced consumption, and precise power dosage.
- Motor digital sem escova: Provides increased power and efficiency.
- Alto torque: Up to 75 Nm for demanding applications.
- Velocidade variável: Up to 2100 RPM for versatile drilling and driving.
- LED Front Lighting: Ilumina a área de trabalho para melhor visibilidade.
- Proteção da bateria: Triple battery self-protection against overload and cell power differences.
Figure 1.1: The Beta 1972/18 Impact Driver, showcasingraças ao seu design compacto e à sua pega ergonómica.
2. Componentes incluídos
Your Beta 1972/18 Impact Driver package includes the following items:
- Beta 1972/18 Impact Driver
- 2 baterias de íons de lítio de 5 Ah
- Quick Charger (80 minutes charging time)
- Hard Case for storage and transport
- Belt Clip (right/left mountable)
Figure 2.1: All components of the Beta 1972/18 kit neatly organized within the durable hard case.
3. Configuração e montagem
3.1 Carregando a bateria
- Connect the quick charger to a suitable power outlet.
- Slide the 5Ah Lithium-Ion battery onto the charger until it clicks into place.
- Allow approximately 80 minutes for a full charge. The charger will indicate when charging is complete.
- Depois de carregada, remova a bateria do carregador.
3.2 Instalando a bateria
- Align the charged battery with the base of the impact driver.
- Slide the battery firmly into the tool until it locks securely.
- To remove, press the battery release buttons on the sides and slide the battery out.
3.3 Prendendo o clipe de cinto
The belt clip can be attached to either the right or left side of the tool for convenient carrying.
- Locate the screw hole on the side of the tool where you wish to attach the clip.
- Align the belt clip with the hole and secure it with the provided screw.
4. Instruções de operação
4.1 Ligar/Desligar e Controle de Velocidade
- To power on the tool, press the trigger switch. The LED front light will illuminate.
- To power off, release the trigger switch.
- The tool features a variable speed trigger. Pressing the trigger further increases the speed up to 2100 RPM.
- Use the speed selector switch (if present, typically near the chuck) to choose between two speed ranges for different applications.
4.2 Ajuste de torque
The torque collar allows you to adjust the amount of torque applied, preventing overtightening or stripping screws. Rotate the collar to select the desired torque setting, up to 75 Nm.
4.3 Drilling and Driving
- Insert the appropriate drill bit or driver bit into the chuck. Tighten the chuck securely.
- Select the desired speed and torque setting.
- Posicione a ferramenta firmemente contra a peça de trabalho.
- Press the trigger to begin drilling or driving. Apply steady, even pressure.
- For drilling into steel, the maximum recommended diameter is 13 mm. For wood, it is 45 mm.
Figure 4.1: Demonstrating the Beta 1972/18 in action, drilling into a wooden surface.
Figure 4.2: The compact design allows for use in confined spaces, such as under a car hood.
5. Manutenção
5.1 Limpeza
- Desconecte sempre a bateria antes de limpar.
- Limpe a ferramenta com um pano limpo e seco.amp pano. Não use produtos químicos agressivos ou produtos de limpeza abrasivos.
- Keep ventilation openings clear of dust and debris. Use compressed air if necessary.
5.2 Cuidados e armazenamento da bateria
- Guarde as baterias em local fresco e seco, longe da luz solar direta e de temperaturas extremas.
- Para armazenamento de longo prazo, carregue as baterias até aproximadamente 50% da capacidade.
- Do not store batteries in a discharged state to prevent damage.
5.3 Manutenção Geral
- Regularly inspect the chuck for wear and tear.
- Check the power cord of the charger for any damage.
- Ensure all screws and fasteners on the tool are tight.
6. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| A ferramenta não inicia | Bateria não carregada ou mal inserida. | Certifique-se de que a bateria esteja totalmente carregada e inserida corretamente. |
| Potência/desempenho reduzidos | Bateria fraca ou ferramenta sobrecarregada. | Recarregue a bateria. Reduza a carga na ferramenta. |
| Bateria não carrega | Charger not connected, faulty battery, or extreme temperature. | Check charger connection. Allow battery to reach room temperature. Contact support if issue persists. |
| Vibração ou ruído excessivo | Loose bit, damaged chuck, or internal issue. | Ensure bit is securely fastened. Inspect chuck for damage. If problem persists, seek professional service. |
7. Especificações
| Recurso | Detalhe |
|---|---|
| Fabricante | Beta |
| Número da peça | 019720018 |
| Número do modelo do item | Beta 1972/18 |
| Fonte de energia | Electric (Battery) |
| Volumetage | 18 Volts |
| Torque | 75 Newton Metros |
| Velocidade | 2100 RPM (máx.) |
| Características especiais | Brushless Motor, Compact |
| Uso | Profissional |
| Componentes incluídos | 2 x 5Ah Li-ion batteries, Quick charger (80 min) |
| Tipo de célula da bateria | Íon de lítio |
| Peso do item | 5.88 kg |
| Dimensões da embalagem | 46.5 x 36 x 14.5 cm |
| Data da primeira disponibilidade | 15 de junho de 2019 |
8. Garantia e Suporte
The Beta 1972/18 Impact Driver comes with a Garantia de 3 anos, garantindo tranquilidade em relação à sua qualidade e desempenho.
Beta Tools is a leading company in Italy for the design and production of professional work tools. They maintain a strong presence with three production facilities in Italy, demonstrating their commitment to quality and customer satisfaction.
For technical assistance, warranty claims, or any product-related inquiries, please refer to the contact information provided in your product packaging or visit the official Beta Tools webGuarde o comprovante de compra como prova de aquisição para fins de garantia.
Para obter mais informações, você pode visitar o Beta Brand Page on Amazon.
