1. Introdução
Obrigado pela compra.asing the BeamZ LF1500 Professional Heavy Fog Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before first use and keep it for future reference.
Produto acimaview
The BeamZ LF1500 is a professional heavy fog machine designed to produce ground-hugging fog effects without the need for dry ice. It utilizes advanced ultrasonic technology to create a dense, low-lying fog using standard fog fluid and water. Its robust flight case with wheels ensures easy transport and protection, making it ideal for various events and professional applications.
Figure 1: BeamZ LF1500 Heavy Fog Machine with its flexible fog output hose and nozzle.
2. Instruções de segurança
Observe sempre as seguintes precauções de segurança para evitar choque elétrico, incêndio ou ferimentos:
- Ensure the unit is connected to a grounded power outlet (230Vac / 50Hz).
- Não opere a máquina se o cabo de alimentação estiver danificado.
- Keep the machine away from flammable materials.
- Use only BeamZ approved fog fluid and demineralized water.
- Do not touch hot surfaces during or immediately after operation.
- Assegure-se de que haja ventilação adequada ao redor da máquina.
- Não mergulhe a unidade em água ou outros líquidos.
- Mantenha fora do alcance de crianças.
- Desconecte da energia antes de limpar ou fazer manutenção.
3. Configuração
- Desembalagem: Carefully remove the machine from its packaging. Inspect for any damage during transit.
- Colocação: Place the machine on a stable, level surface. Ensure there is sufficient space around the unit for ventilation.
- Enchimento de fluido:
- Open the fluid reservoir cap.
- Fill the 5-liter reservoir with a mixture of BeamZ standard fog fluid and demineralized water. Refer to the fog fluid instructions for recommended ratios.
- Securely close the reservoir cap.
- Ligação da Mangueira: Attach the flexible fog output hose to the designated port on the machine. Ensure it is securely fastened to prevent leaks.
- Conexão de energia: Connect the power cable to a suitable 230Vac / 50Hz grounded power outlet.
4. Instruções de operação
Initial Power-On and Warm-up
Once connected to power, the machine will automatically begin its warm-up cycle. The warm-up time is approximately 8 minutes. The display will indicate when the machine is ready for operation.
Modos de controle
The BeamZ LF1500 can be controlled via DMX or manually.
Operação manual
Use the integrated digital display and control buttons to adjust settings directly on the unit. You can control:
- Saída de nevoeiro: Adjust the intensity of the fog production.
- Velocidade do ventilador: Control the speed of the internal fan, which affects the spread and density of the fog.
- Nevoeiro contínuo: The machine supports continuous fog output once warmed up.
Operação DMX
For advanced control and integration into lighting setups, connect a DMX controller to the 3-pin XLR DMX input/output ports. The machine supports 1 or 2 DMX channels. Refer to the DMX chart below for channel assignments and values.
| Canal | Função | Faixa de valor | Descrição |
|---|---|---|---|
| 1 | Saída de névoa | 0-255 | 0 = Off, 1-255 = Fog output intensity (0-100%) |
| 2 | Velocidade do ventilador | 0-255 | 0 = Off, 1-255 = Fan speed (0-100%) |
5. Manutenção
Regular maintenance ensures the longevity and optimal performance of your BeamZ LF1500.
- Reposição de fluidos: Always use fresh, clean fog fluid and demineralized water. Do not mix different types of fluid.
- Limpeza:
- Periodically clean the exterior of the machine with a soft, dry cloth.
- Ensure the air vents are free from dust and debris to prevent overheating.
- If the machine is stored for extended periods, it is recommended to run a cleaning solution (distilled water) through the system to prevent clogs.
- Armazenar: Store the machine in a cool, dry place. If storing for a long time, empty the fluid reservoir.
6. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Sem saída de névoa |
|
|
| Produção de névoa fraca |
|
|
| A máquina não liga |
|
|
If problems persist after attempting these solutions, please contact BeamZ customer support or a qualified service technician.
7. Especificações
| Recurso | Especificação |
|---|---|
| Número do modelo | LF1500 (160.748) |
| Fonte de energia | 230Vca / 50Hz |
| Tempo de aquecimento | Aproximadamente 8 minutos |
| Capacidade do tanque de fluido | 5 litros |
| Modos de controle | DMX, manual |
| Canais DMX | 1 ou 2 |
| Conexão DMX | XLR de 3 pinos |
| Dimensões (C x L x A) | 630 x 350 x 480 mm |
| Peso | 25.6 kg |
| Tecnologia | Ultrasonic (no dry ice required) |
| Saída Contínua | Sim |
8. Garantia e Suporte
Information regarding warranty coverage and customer support for the BeamZ LF1500 is typically provided with your purchase documentation or can be found on the official BeamZ webPor favor, guarde seu comprovante de compra para eventuais reclamações de garantia.
For technical assistance, spare parts, or service inquiries, please contact your local BeamZ distributor or visit the official BeamZ website para informações de contato.
Loja oficial da marca: BeamZ Amazon Store
9. Recursos de mídia
Below are relevant media resources for the BeamZ LF1500.
Imagens de produtos
The BeamZ LF1500 Professional Heavy Fog Machine, showcasing its compact design within a flight case and the flexible output hose for directing fog.
Vídeos oficiais do produto
Não foram encontrados vídeos oficiais do produto fornecidos pelo vendedor nos dados disponíveis.
