1. Produto acabadoview
The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.
- Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
- Freio mecânico: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
- Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
- Motor de alta capacidade: Designed for high load capacity and efficiency, delivering strong power output.
- Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
- Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
- Design ergonômico: Compact and ergonomic form for comfortable handling.
- Tool-Free Guard Adjustment: The protective guard can be adjusted without the need for additional tools.
- SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.
2. Instruções de segurança
Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.
Segurança Geral
- Utilize sempre os equipamentos de proteção individual (EPI) adequados, incluindo óculos de segurança, protetores auriculares, luvas e máscara contra poeira.
- Certifique-se de que a peça de trabalho está bem clamped antes da operação.
- Keep hands clear of rotating parts and the cutting/grinding area.
- Não opere a ferramenta em atmosferas explosivas, como na presença de líquidos inflamáveis, gases ou poeira.
- Mantenha crianças e espectadores afastados enquanto estiver operando uma ferramenta elétrica.
Segurança elétrica
- Certifique-se de que a fonte de alimentação voltage corresponde à classificação na placa de identificação da ferramenta.
- Não abuse do cabo. Nunca use o cabo para carregar, puxar ou desligar a ferramenta elétrica. Mantenha o cabo longe de calor, óleo, bordas afiadas ou peças móveis.
- Se estiver operando uma ferramenta elétrica em um anúncioamp localização for inevitável, use uma fonte de alimentação protegida por dispositivo de corrente residual (RCD).
Specific Angle Grinder Safety
- Always use the protective guard. Ensure it is correctly positioned and securely fastened.
- Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
- Never use cutting discs for side grinding.
- Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
- Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.
3. Componentes e recursos
Componentes principais:
- Corpo principal: Houses the motor, electronics, and gearbox.
- Guarda Protetora: Adjustable, tool-free guard for user protection.
- SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
- Botão de bloqueio do eixo: Para facilitar a troca de discos.
- Interruptor deslizante: Lockable for continuous operation.
- Speed Selection Dial: For variable speed control (see Figure 2).
- Saídas de ar: For motor cooling and dust expulsion.
4. Configuração
Attaching the SoftVib Handle
The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.
Mounting the Protective Guard
The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.
Installing the Grinding/Cutting Disc
- Unplug the tool from the power supply.
- Pressione e segure o botão de trava do eixo.
- Coloque o cl internoampflange de encaixe no fuso.
- Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
- Aparafuse o clamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
- Solte o botão de bloqueio do eixo.
5. Instruções de operação
Ligar/desligar
- To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- To switch off, release the slide switch. If locked, press the rear part of the switch to release it.
Controle de velocidade variável
The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.
Using the Mechanical Brake
The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.
Working with the Grinder
- Segure sempre o moedor firmemente com as duas mãos.
- Allow the tool to reach full operating speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
- For cutting, use a slight rocking motion to prevent the disc from binding.
- Be mindful of sparks and debris. Direct them away from yourself and others.
6. Manutenção
Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.
Limpeza
- Sempre desconecte a ferramenta antes de limpá-la.
- Limpe regularmente as aberturas de ventilação para evitar o acúmulo de poeira, que pode causar superaquecimento. Se possível, utilize ar comprimido.
- Limpe a parte externa da ferramenta com o produto.amp pano. Não use produtos químicos agressivos ou produtos de limpeza abrasivos.
Escovas de carvão
The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.
Armazenar
Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.
7. Solução De Problemas
| Problema | Possível causa | Solução |
|---|---|---|
| A ferramenta não inicia | Sem fonte de alimentação Restart interlock activated (after power failure) Cabo de alimentação danificado | Verifique a conexão de energia Unplug and re-plug the tool Inspect cord for damage; replace if necessary (by qualified personnel) |
| A ferramenta para durante a operação. | Proteção contra sobrecarga ativada Disc jammed (anti-kickback activated) | Reduza a pressão; deixe a ferramenta esfriar. Release switch, clear obstruction, then restart |
| Vibração excessiva | Worn or damaged disc Disco montado incorretamente Alça solta | Substitua o disco Re-mount disc correctly, ensure clamping nut is tight Tighten SoftVib handle |
| Reduced performance / Excessive sparking | Escovas de carvão gastas Dust buildup in vents | Have brushes inspected/replaced by service center Clean air vents thoroughly |
8. Especificações
| Característica | Valor |
|---|---|
| Número do modelo | 447668 |
| Entrada de energia | 1700 W |
| Potência de saída | 1050 W |
| Volumetage | 230 V |
| Freqüência | 50/60 Hz |
| Diâmetro Máx. do Disco | 125 milímetros |
| Velocidade sem carga | 2800-11500 rpm |
| Tool Holder (Angle Grinder) | M14 |
| Comprimento do cabo | 4m |
| Dimensões (C x L x A) | 340 x 77 x 105 mm |
| Peso | 2.6 kg |
| Cor | Vermelho, preto, prata |
| Material | Metal |
9. Garantia e Suporte
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.
Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex website ou na embalagem do seu produto.
