Manual de instruções do suporte de parede para monitor único ONKRON G120-BLK
Model: G120-BLK
Introdução
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your ONKRON G120-BLK Single Monitor Wall Mount. Please read this manual thoroughly before installation and retain it for future reference.
Image: The ONKRON G120-BLK Single Monitor Wall Mount, a black articulating arm designed for wall mounting.
Informações de segurança
WARNING: Improper installation or use of this product may result in serious injury or damage. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer or ONKRON customer support.
- Certifique-se de que a superfície de montagem suporte com segurança o peso combinado do suporte e do monitor.
- Não exceda a capacidade máxima de peso de 17.6 kg (8 lbs).
- Este suporte foi projetado para monitores entre 13 e 34 polegadas.
- Always use the provided hardware. If any parts are missing or defective, contact ONKRON for replacement.
- Exercise caution when handling the gas spring mechanism. The spring is under tension and can cause injury if not handled correctly. Do not remove plastic covers over the main poles as they are for protection.
- Mantenha crianças e animais de estimação afastados durante a instalação.
Conteúdo da embalagem
Verifique se todos os componentes estão presentes antes de iniciar a instalação.
Image: All components included in the ONKRON G120-BLK package, including the mount, various screws, washers, wall anchors, and an Allen key.
- Monitor Wall Mount Assembly
- Placa VESA
- Placa de parede
- Mounting Hardware (screws, anchors, washers for various VESA sizes)
- Chave Allen (6 mm)
- Manual de instruções
Configuração e instalação
Follow these steps carefully for a secure installation. It is recommended to have a second person assist during monitor attachment.
Guia de vídeo de instalação
Video: An official ONKRON instruction video demonstrating the installation process for the G120-B monitor mount.
Etapa 1: marcação de furos
- Determine the desired mounting location on your wall. Ensure it is a solid surface (e.g., wood stud, concrete) capable of supporting the weight.
- Hold the wall plate against the wall at the desired height and use a pencil to mark the drill hole locations.
Image: The ONKRON G120-BLK monitor mount securely installed on a brick wall, demonstrating a typical mounting scenario.
Etapa 2: Instalando o suporte
- Drill pilot holes at the marked locations. The drill bit size will depend on your wall material and the anchors used.
- Secure the wall plate to the wall using the appropriate screws and anchors. Ensure it is firmly attached and level.
Step 3: Attaching the Monitor to the Mount
- Attach the VESA plate to the back of your monitor using the correct screws (M4 or M6) that fit your monitor's VESA pattern (75x75mm or 100x100mm). Ensure the screws are tightened securely but do not overtighten.
- Carefully lift the monitor and slide the VESA plate onto the arm's mounting head. Ensure it clicks into place or is secured with the provided locking mechanism.
Image: Diagram illustrating VESA 75x75mm and 100x100mm mounting patterns, compatible screen diagonal (13"-34"), and load capacity (2.2-17.6 lbs).
Step 4: Adjusting for Monitor Weight (Gas Spring Tension)
The gas spring tension must be adjusted after the monitor is attached to ensure it holds its position. If the monitor sags or springs up, adjust the tension.
- Locate the gas spring adjustment screw on the arm.
- Use the provided Allen key to turn the screw:
- Vez sentido anti-horário for lighter screens (to reduce tension).
- Vez sentido horário for heavier screens (to increase tension).
- Adjust gradually until the monitor stays in the desired vertical position when released.
Image: Close-up of the gas spring adjustment point on the monitor arm, showing the Allen key inserted and directional arrows for adjusting tension for lighter or heavier screens.
Operating the Monitor Mount
The ONKRON G120-BLK offers a range of adjustments for optimal viewconforto.
- Ajuste de altura: The arm allows for 11 inches (28 cm) of vertical height adjustment. Gently push or pull the monitor to the desired height.
- Extensão/Retração: The arm can extend from 3.5 inches (8.9 cm) to 13.7 inches (34.8 cm) from the wall.
- Inclinar: Adjust the monitor tilt from +90° to -45° to reduce glare and find your preferred viewângulo de engate.
- Giratório: Swivel the monitor 180° left or right.
- Rotação: Gire o monitor 360° para a orientação paisagem ou retrato.
Image: Four panels demonstrating the full motion capabilities of the mount: 180° swivel, 360° rotation, +90° to -45° tilt, and 11 inches of height adjustment.
Gerenciamento de cabos
Utilize o sistema integrado de gerenciamento de cabos para manter seu espaço de trabalho organizado.
- Route monitor cables through the channels on the underside of the arm.
- Secure the cables using the provided clips or covers to maintain a clean appearance.
Imagem: Close-up view of the monitor arm showing a cable neatly routed through the integrated cable management channel.
Manutenção
A manutenção regular garante a longevidade e o desempenho ideal do seu suporte de monitor.
- Limpeza: Limpe a montagem com um pano macio e seco.amp pano. Evite produtos de limpeza abrasivos ou solventes.
- Verificações periódicas: Verifique periodicamente todos os parafusos e conexões para garantir que permaneçam firmes. Reaperte-os, se necessário.
- Ajuste da mola a gás: If your monitor's weight changes or if the arm no longer holds its position, re-adjust the gas spring tension as described in the Setup section.
Solução de problemas
Consulte esta seção para obter soluções para problemas comuns.
| Problema | Possível causa | Solução |
|---|---|---|
| O monitor cede ou não se mantém na altura desejada. | A tensão da mola a gás é muito baixa para o peso do monitor. | Increase gas spring tension by turning the adjustment screw clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| Monitor springs up or is difficult to push down. | A tensão da mola a gás é excessiva para o peso do monitor. | Decrease gas spring tension by turning the adjustment screw counter-clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| O suporte parece instável ou bambo. | Loose connections or improper wall installation. | Check all mounting screws on the wall plate and VESA plate. Ensure they are securely tightened. Verify the wall can support the mount and monitor. |
| Difficulty with monitor movement (tilt, swivel, rotation). | As juntas estão muito apertadas. | Some joints may have adjustable tension screws. Loosen slightly if movement is too stiff. Do not over-loosen. |
Especificações
- Modelo: G120-BLK
- Compatibilidade de tamanho de tela: 13 - 34 polegadas
- Capacidade de peso: 2.2 - 17.6 libras (1 - 8 kg)
- Compatibilidade VESA: 75x75mm, 100x100mm
- Ângulo de inclinaçao: +90° a -45°
- Ângulo giratório: 180°
- Rotação: 360°
- Ajuste de altura: 11 polegadas (28 cm)
- Extensão do braço: 3.5 polegadas (8.9 cm) a 13.7 polegadas (34.8 cm)
- Material: Alumínio
- Dimensões do produto: 16.34 x 2.28 x 6.61 polegadas (41.5 x 5.8 x 16.8 cm)
- Peso do item: 3.96 libras (1.8 kg)
Garantia e Suporte
ONKRON products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official ONKRON website.
If you encounter any issues or have questions regarding your ONKRON G120-BLK monitor mount, please contact ONKRON customer support for assistance. Our experts are available to help.
Informações de contato: Please refer to the ONKRON webPara obter as informações de contato mais atualizadas, consulte o site ou a embalagem do produto.
