Introdução
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Steinel LED-spot Way N with Twilight Sensor. Please read these instructions carefully before use and retain them for future reference.
The Steinel LED-spot Way N is an IP44-rated outdoor path light designed to provide reliable illumination for driveways, access paths, and garden areas. It features an integrated twilight sensor for automatic operation and an adjustable spotlight head for precise light direction.
Instruções de segurança
- Segurança elétrica: Installation must be performed by a qualified electrician in accordance with national wiring regulations. Ensure the power supply is disconnected before installation or maintenance.
- Volumetage: This product operates on 220 - 240 V / 50 - 60 Hz AC mains power.
- Classe de proteção: The device has an IP44 protection rating, making it suitable for outdoor use and protected against splashing water.
- Lamp Tipo: Use apenas o LED GU10 lamps as specified. Do not exceed the maximum wattage of 9W for replacement GU10 LED lamps.
- Montagem: Certifique-se de que a superfície de montagem seja estável e capaz de suportar o peso da luminária.
- Crianças: Mantenha os materiais de embalagem e as peças pequenas longe do alcance de crianças.
Configuração e instalação
1. Desembalagem
Carefully remove all components from the packaging. Verify that all parts listed in the 'Included Components' section are present and undamaged.
Image: The Steinel LED-spot Way N, its GU10 LED lamp, 2.5m power cable with plug, mounting hardware (screws, plugs), and quick start guide, as received in its packaging.
2. Mounting the Spotlight
The LED-spot Way N is designed for easy floor mounting. Choose a suitable location on a stable surface, such as a patio, pathway, or garden area.
- Position the base of the spotlight at the desired location.
- Marque os pontos de perfuração através dos furos na base.
- Drill holes at the marked positions. Insert the provided wall plugs if mounting into masonry or concrete.
- Secure the spotlight base to the surface using the supplied screws.
3. Conectando energia
The spotlight comes with a pre-installed 2.5-meter power cable and plug for convenient connection to a standard outdoor power outlet.
Image: The included 2.5-meter power cable with a standard European plug, ready for connection to an outdoor power source.
- Ensure the power outlet is suitable for outdoor use and has appropriate weather protection.
- Plug the power cable into the outdoor outlet.
- Ensure the cable is routed safely to prevent tripping hazards and damage.
4. EUamp Instalação/Substituição
The spotlight includes a replaceable GU10 LED lamp. To install or replace the lamp:
- Certifique-se de que a fonte de alimentação esteja desconectada.
- Carefully twist and remove the front cover of the spotlight.
- Insert the GU10 LED lamp into the socket, aligning the pins, and twist to secure it.
- Replace the front cover, ensuring it is securely fastened to maintain the IP44 rating.
Instruções de operação
1. Automatic Twilight Sensor (NightAutomatic)
The Steinel LED-spot Way N features a NightAutomatic function, which means the light will automatically turn on when ambient light levels fall below a set threshold and turn off when it becomes bright enough. This ensures continuous illumination after sunset.
Image: Multiple Steinel LED-spot Way N lights providing consistent illumination along an outdoor pathway during twilight hours.
2. Adjusting the Twilight Sensor
The twilight sensor sensitivity can be adjusted directly on the spotlight to suit your specific needs (2-1000 lux).
- Locate the adjustment dial or switch for the twilight sensor on the fixture.
- Turn the dial to increase or decrease the lux threshold. A lower lux setting means the light will turn on earlier in dimmer conditions, while a higher setting means it will turn on later when it's darker.
- Test the setting by observing the light's behavior at dusk and dawn.
3. Adjusting the Spotlight Head
The spotlight head offers flexibility in directing the light beam.
Image: Close-up of the Steinel LED-spot Way N's adjustable head, showing its capability to rotate horizontally and vertically for precise light positioning.
- The spotlight head can be rotated 180° horizontalmente.
- It can also be tilted 90° verticalmente.
- Gently adjust the head to illuminate your desired area, such as a path, plant, or architectural feature.
Manutenção
1. Limpeza
To maintain the appearance and performance of your spotlight:
- Ensure the power supply is disconnected before cleaning.
- Limpe o aparelho com um pano macio e seco.amp pano.
- Do not use abrasive cleaners, solvents, or high-pressure washers, as these can damage the finish or internal components.
- Regularly clean the twilight sensor lens to ensure accurate light detection.
Image: An icon depicting a rain cloud, symbolizing the IP44 weather resistance of the product, which protects it from splashing water.
2. EUamp Substituição
Refer to the 'Lamp Installation/Replacement' section under Setup for detailed instructions on how to replace the GU10 LED lamp.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| A luz não acende. | Sem fonte de alimentação. | Check the power outlet and circuit breaker. Ensure the plug is fully inserted. |
| Faulty GU10 LED lamp. | Replace the GU10 LED lamp. | |
| Twilight sensor setting is too high (light thinks it's still bright). | Adjust the twilight sensor sensitivity to a lower lux value. | |
| A luz permanece acesa durante o dia. | Twilight sensor setting is too low (light thinks it's still dark). | Adjust the twilight sensor sensitivity to a higher lux value. |
| Sensor lens is dirty or obstructed. | Clean the sensor lens and remove any obstructions. |
Especificações técnicas
| Recurso | Especificação |
|---|---|
| Número do modelo | 58678 |
| Dimensões (C x L x A) | 226 x 140 x 572 mm |
| Peso | 1.23 kg |
| Conexão de rede | 220 - 240 V / 50 - 60 Hz |
| Consumo de energia | 7.86 W |
| Fluxo Luminoso | 512 lumens (fixture), 620 lumens (included GU10 lamp) |
| Temperatura de cor | 3000 K (branco quente) |
| Classe de proteção | IP44 |
| Material | Alumínio |
| Terminar | Powder-coated (Anthracite) |
| Twilight Sensor Range | 2 - 1000 lux |
| Ajuste da cabeça do holofote | 180 ° horizontal, 90 ° vertical |
| Incluído Lamp Tipo | GU10 LED (replaceable, max 9W) |
| Classe de Eficiência Energética | F |
Informações de garantia
Steinel products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Steinel webGuarde seu comprovante de compra para eventuais solicitações de garantia.
Suporte ao cliente
If you encounter any issues or have questions regarding your Steinel LED-spot Way N that are not covered in this manual, please contact Steinel customer support. You can find contact details on the official Steinel website ou através do seu revendedor.
Recursos on-line: For additional information, product registration, or FAQs, please visit the Oficial Steinel website.
