1. Instruções importantes de segurança
Leia atentamente estas instruções antes de usar o aparelho e guarde-as para futuras consultas. O não cumprimento destas instruções pode resultar em choque elétrico, incêndio ou ferimentos graves.
- NÃO CUBRA: Never cover the heater. Covering the heater can lead to overheating and fire. The appliance has a warning label indicating this.
- Garantir o volumetage indicado na etiqueta de classificação corresponde ao volume da rede elétricatage na sua casa.
- Este aparelho destina-se apenas ao uso doméstico. Não o utilize para fins comerciais ou industriais.
- Do not use the heater in bathrooms, near water, or in damp ambientes.
- Always place the heater on a stable, flat, and heat-resistant surface.
- Keep the heater at a safe distance from flammable materials such as furniture, curtains, and paper.
- Não introduza quaisquer objetos nas aberturas do aquecedor.
- Desligue o aquecedor da tomada quando não estiver em uso ou antes de limpá-lo.
- Não utilize o aquecedor com um cabo ou ficha danificados. Se o cabo estiver danificado, deve ser substituído pelo fabricante, pelo seu agente de assistência técnica ou por pessoal qualificado para evitar riscos.
- This appliance is equipped with an overheat protection system. If the heater overheats, it will automatically shut off. Unplug the heater, allow it to cool down, and then check for any obstructions before restarting.
- Supervisione crianças e animais de estimação quando o aquecedor estiver em funcionamento.
2. Produto acabadoview
The Mesko MS7719 is a portable electric fan heater designed to provide quick heating or cooling for various indoor spaces. It features two power settings for heating, a cold air function, and a thermostat for temperature control. Its compact size and lightweight design make it easy to move and position where needed.

Figura 1: Frente view of the Mesko MS7719 Portable Electric Fan Heater, showing the fan grille, control knobs, and indicator light.

Figure 2: Close-up of the control panel, highlighting the thermostat knob (left) and mode selector knob (right).
3. Configuração
- Desembalagem: Carefully remove the heater from its packaging. Retain the packaging for storage or disposal according to local regulations.
- Colocação: Place the heater on a firm, level, and stable surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater from walls, furniture, and other objects to allow for proper airflow and prevent fire hazards.
- Conexão de energia: Ensure the heater is switched off (mode selector knob set to 'O' or 'OFF'). Plug the power cord into a suitable electrical outlet (220-240V, 50Hz).
4. Instruções de operação
The Mesko MS7719 heater features two control knobs on its front panel:
- Botão esquerdo: Controle do termostato.
- Botão direito: Mode selector (Power/Airflow).
4.1. Seleção de modo
Turn the right knob (mode selector) to choose the desired operating mode:
- O (OFF): Desliga o aquecedor.
- Fan Only (Cold Air): Activates the fan without heating, providing a cool airflow. This mode is indicated by a fan icon.
- Heat Setting I (1000W): Provides low-level heating. This mode is indicated by a single wave icon.
- Heat Setting II (2000W): Provides high-level heating. This mode is indicated by a double wave icon.
4.2. Controle de temperatura (termostato)
Once a heating mode (Heat Setting I or II) is selected, use the left knob (thermostat) to set the desired room temperature:
- Turn the thermostat knob clockwise to increase the desired temperature.
- Turn the thermostat knob counter-clockwise to decrease the desired temperature.
- O aquecedor ligará e desligará para manter a temperatura definida.
4.3. Luz indicadora
A red indicator light on the front panel illuminates when the heater is operating (fan or heating modes).

Figure 3: The fan heater positioned in a room, demonstrating its compact and portable nature.
5. Manutenção
Regular cleaning and maintenance will help ensure the longevity and efficient operation of your heater.
- Antes da limpeza: Desligue sempre o aquecedor da tomada e deixe-o arrefecer completamente antes de o limpar.
- Limpeza externa: Limpe as superfícies externas do aquecedor com um pano macio e seco.amp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic housing.
- Entrada/Saída de Ar: Use a vacuum cleaner with a brush attachment to gently remove dust and debris from the air inlet and outlet grilles. Ensure these areas are clear of obstructions.
- Armazenar: When not in use for extended periods, store the heater in its original packaging or a clean, dry place.
- Não mergulhe: Never immerse the heater or its power cord in water or any other liquid.
6. Solução De Problemas
If you encounter issues with your Mesko MS7719 heater, please refer to the following common troubleshooting steps:
- O aquecedor não liga:
- Verifique se o cabo de alimentação está firmemente conectado a uma tomada elétrica em funcionamento.
- Ensure the mode selector knob is set to a heating or fan mode, not 'O' (OFF).
- Verify that the thermostat knob is set to a temperature higher than the current room temperature.
- Verifique o disjuntor ou a caixa de fusíveis da sua casa.
- Heater turns off unexpectedly (Overheat Protection):
- The heater has an automatic overheat protection system. If it shuts off, unplug it immediately.
- Allow the heater to cool down for at least 10-15 minutes.
- Inspect the air inlet and outlet grilles for any obstructions (dust, lint, objects). Clear any blockages.
- Ensure the heater is placed on a stable surface and has adequate clearance around it.
- Plug the heater back in and restart. If the issue persists, contact customer support.
- No heat in heating mode:
- Ensure the mode selector is set to Heat Setting I or II.
- Ajuste o termostato para uma configuração mais alta.
If these steps do not resolve the issue, please contact Mesko customer support or your retailer for assistance.
7. Especificações
Technical specifications for the Mesko MS7719 Portable Electric Fan Heater:
| Recurso | Especificação |
|---|---|
| Marca | Mesko |
| Número do modelo | MS 7719 |
| Cor | Branco |
| Dimensões do produto (C x L x A) | 14 x 17 x 22 cm |
| Material | Plástico |
| Configurações de energia | 2 (1000W/2000W) |
| Modos de fluxo de ar | Cold Air (Fan Only), Warm Air (1000W), Hot Air (2000W) |
| Termostato | Sim |
| Proteção contra superaquecimento | Sim |
| Desligamento automático | No (but has overheat protection) |
| Peso do produto | 1 kg |
| Fonte de energia | Cabo elétrico |
| Método de aquecimento | Ar forçado |
| Uso recomendado | Home (Indoor) |
| Tipo de montagem | Mesa |

Figure 4: Dimensions of the Mesko MS7719 Portable Electric Fan Heater.
8. Garantia e Suporte
For warranty information, please refer to the warranty card included with your purchase or consult the retailer where the product was purchased. Mesko provides a standard manufacturer's warranty against defects in materials and workmanship.
For technical support, spare parts, or service inquiries, please contact your local Mesko distributor or the retailer from whom you purchased the product. Please have your model number (MS7719) and proof of purchase ready when contacting support.





