1. Introdução
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Richmat Electric Bed Motor. This dual-motor system is designed to provide reliable and powerful adjustment for electric beds, featuring a maximum thrust of 6500N per motor. It includes both wired and wireless remote controls for flexible use.
Figure 1: Richmat Electric Bed Motor with included wireless and wired remote controls.
2. Configuração e instalação
Before installation, ensure all components are present and undamaged. The motor is designed for easy integration into compatible electric bed frames.
2.1. Dimensions and Compatibility
The motor features a robust design with a maximum thrust of 6500N per motor. The center distance between the two mounting rods on the motor is 581 mm. The overall dimensions are 707 mm (length) x 167 mm (width) x 121 mm (height).
Figure 2: Detailed dimensions of the Richmat Electric Bed Motor (measurements in mm).
2.2. Etapas de instalação
- Preparação: Ensure the bed frame is stable and accessible. Disconnect power from any existing motor system.
- Montagem: Align the motor's mounting points with the corresponding points on your bed frame. Secure the motor using appropriate fasteners (not included, typically provided with the bed frame). The mounting hole diameter is 25mm.
- Conexão elétrica: Connect the motor's power cable to a suitable power outlet. Ensure the connection is secure.
- Conexão de controle remoto: Plug in the wired remote control if you intend to use it. The wireless remote control operates via 2.4G frequency and does not require a direct cable connection to the motor.
- Teste inicial: Once installed, carefully test the motor's functions using the remote controls to ensure smooth operation of the head and foot sections.
3. Instruções de operação
The Richmat Electric Bed Motor offers dual control options: a 2.4G wireless handheld controller and a wired handheld controller. You can choose the controller that best suits your preference and environment.
3.1. Controle remoto sem fio
The wireless remote provides convenient control without physical tethering. It features buttons for adjusting the head and foot sections of the bed.
Figure 3: Wireless Remote Control (Front and Side Viewe).
- Cabeça para cima/para baixo: Use the designated buttons to raise or lower the head section of the bed.
- Pé para cima/para baixo: Use the designated buttons to raise or lower the foot section of the bed.
- Movimento simultâneo: Some buttons may allow for synchronized movement of both head and foot sections.
3.2. Controle Remoto com Fio
The wired remote control offers a reliable connection and similar functionality to the wireless version.
Figure 4: Wired Remote Control.
- Cabeça para cima/para baixo: Press and hold the corresponding buttons to adjust the head section.
- Pé para cima/para baixo: Press and hold the corresponding buttons to adjust the foot section.
4. Manutenção
Proper maintenance ensures the longevity and optimal performance of your electric bed motor.
- Limpeza: Regularly clean the motor and remote controls with a dry, soft cloth. Avoid using abrasive cleaners or solvents.
- Proteção contra umidade: Protect the unit from moisture and liquids. Do not expose it to water or high humidity.
- Inspeção de cabos: Periodically inspect all cables for signs of wear, fraying, or damage. Replace damaged cables immediately.
- Lubrificação: The motor is generally maintenance-free regarding internal lubrication. Do not attempt to lubricate internal components unless specifically instructed by a qualified technician.
5. Solução De Problemas
If you encounter issues with your Richmat Electric Bed Motor, refer to the following common problems and solutions:
| Problema | Possível causa | Solução |
|---|---|---|
| O motor não responde ao controle remoto. | No power; Remote control battery low (wireless); Remote control not paired (wireless); Loose cable connection (wired). | Check power outlet and motor connection. Replace remote batteries. Re-pair wireless remote (refer to specific pairing instructions if available). Ensure wired remote cable is securely plugged in. |
| O motor está fazendo ruídos estranhos. | Obstruction; Loose mounting; Internal issue. | Check for any obstructions around the motor or moving parts. Ensure the motor is securely mounted. If noise persists, contact support. |
| Bed movement is jerky or inconsistent. | Overload; Obstruction; Power fluctuation. | Ensure the bed is not overloaded beyond its weight capacity. Check for obstructions. Ensure stable power supply. |
Se o problema persistir após tentar essas soluções, entre em contato com o suporte ao cliente para obter mais assistência.
6. Especificações
| Recurso | Detalhe |
|---|---|
| Número do modelo | HJA1 |
| Fabricante | Richmat |
| Dimensões (C x L x A) | 70.7 x 16.7 x 12.1 cm |
| Peso | 5.12 quilos |
| Impulso Máximo | 2 x 6500N |
| Diâmetro do furo de montagem | 25 milímetros |
| Center Distance Between Mounting Rods | 581 milímetros |
| Tipo de controle | 2.4G Wireless Handheld Controller + Wired Handheld Controller |
| Montagem necessária | Sim |
| UPC | 753510673065 |
7. Garantia e Suporte
This Richmat Electric Bed Motor is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact the seller or manufacturer directly. When contacting support, please have your model number (HJA1) and purchase information readily available.
