Introdução
Thank you for choosing the Arlec 80 lm Multi-Function Head Torch. This head torch is designed for versatility and convenience, providing bright illumination for various activities. It features an 80 lumen 3W LED, four distinct light modes, and an adjustable head strap for comfortable wear. This manual provides essential information for the proper setup, operation, and maintenance of your head torch.
Image: The Arlec 80 lm Multi-Function Head Torch in yellow, featuring the main LED light and an adjustable black and grey headband with "HEADLIGHT" and "LED" text.
Configurar
Instalação da bateria
The Arlec Head Torch requires 3 x AAA batteries (included). Follow these steps to install or replace batteries:
- Locate the battery compartment on the back of the head torch unit.
- Open the battery compartment cover by gently pressing the latch and lifting.
- Insert 3 x AAA alkaline batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Feche bem a tampa do compartimento da bateria até ouvir um clique.
Ajustando a faixa de cabeça
The elastic headband is adjustable to fit various head sizes. To adjust:
- Place the head torch on your head.
- Use the adjustable buckle on the headband to tighten or loosen it until it fits comfortably and securely.
Instruções de operação
The Arlec Head Torch features 4 light modes. The power button is located on the top of the head torch unit.
Ligar/desligar e seleção de modo
- Primeira Imprensa: Turns the head torch ON to the first light mode (High Brightness).
- Segunda Imprensa: Switches to the second light mode (Low Brightness).
- Terceira Imprensa: Switches to the third light mode (Red Light).
- Quarta Imprensa: Switches to the fourth light mode (Red Flashing Light).
- Quinta Imprensa: Turns the head torch OFF.
To turn off the head torch from any mode, simply cycle through the modes until it turns off, or press and hold the power button for approximately 2 seconds.
Adjusting Light Head Angle
The light head can be tilted up or down to direct the beam where needed. Gently pivot the light unit to adjust its angle.
Manutenção
- Limpeza: Wipe the head torch with a soft, damp pano. Não use produtos de limpeza abrasivos ou solventes.
- Cuidados com a bateria: If the head torch will not be used for an extended period, remove the batteries to prevent leakage and corrosion.
- Armazenar: Store the head torch in a cool, dry place away from direct sunlight and extreme temperatures.
Solução de problemas
| Problema | Possível causa | Solução |
|---|---|---|
| Head torch does not turn on. | As pilhas estão descarregadas ou instaladas incorretamente. | Substitua as pilhas por novas, certificando-se de que a polaridade está correta. |
| A luz está fraca. | As baterias estão fracas. | Substitua as pilhas. |
| A luz pisca. | Conexão de bateria solta ou bateria fraca. | Verifique se o compartimento da bateria está bem encaixado; substitua as baterias, se necessário. |
Especificações
| Recurso | Detalhe |
|---|---|
| Número do modelo | AT0029GB |
| Fonte de luz | LED de 3 W |
| Fluxo Luminoso | 80 Lúmens |
| Modos de luz | 4 (High, Low, Red, Red Flashing) |
| Fonte de energia | Baterias Alcalinas 3 x AAA |
| Cor | Amarelo |
| Características especiais | Adjustable Headband, Adjustable Light Head |
| Peso do item | Approx. 36.3 kg (Note: This weight seems unusually high for a head torch, likely a data entry error in source. Assuming it refers to package weight or a typo for grams.) |
Garantia e Suporte
For warranty information or technical support, please refer to the product packaging or contact Arlec customer service directly. Keep your purchase receipt as proof of purchase.
Fabricante: Arlec
Data da primeira disponibilidade: 13 de fevereiro de 2023
